Optimization of two-phase R600a ejector geometries using a non-equilibrium CFD model

Abstract A vapor compression cycle, which is typically utilized for the heat pump, air conditioning and refrigeration systems, has inherent thermodynamic losses associated with expansion and compression processes. To minimize these losses and improve the energy efficiency of the vapor compression cycle, an ejector can be applied. However, due to the occurrence of complex physics i.e., non-equilibrium flashing compressible flow in the nozzle with possible shock interactions, it has not been feasible to model or optimize the design of a two-phase ejector. In this study, a homogeneous, non-equilibrium, two-phase flow computational fluid dynamics (CFD) model in a commercial code is used with an in-house empirical correlation for the mass transfer coefficient and real gas properties to perform a geometric optimization of a two-phase ejector. The model is first validated with experimental data of an ejector with R600a as the working fluid. After that, the design parameters of the ejector are optimized using multi-objective genetic algorithm (MOGA) based online approximation-assisted optimization (OAAO) approaches to find the maximum performance.

[1]  Omar Abdelaziz Ahmed Abdelaziz,et al.  Development of multi-scale, multi-physics, analysis capability and its application to novel heat exchangers design and optimization , 2009 .

[2]  Vikrant Chandramohan Aute,et al.  Single and Multiresponse Adaptive Design of Experiments with Application to Design Optimization of Novel Heat Exchangers , 2009 .

[3]  Miad Yazdani,et al.  Numerical modeling of two-phase supersonic ejectors for work-recovery applications , 2012 .

[4]  Armin Hafner,et al.  A computational model of a transcritical R744 ejector based on a homogeneous real fluid approach , 2013 .

[5]  K. Cizungu,et al.  Modelling and optimization of two-phase ejectors for cooling systems , 2005 .

[6]  Henry P. Wynn,et al.  Maximum entropy sampling , 1987 .

[7]  Ashwin W. Patwardhan,et al.  Effect of ejector configuration on hydrodynamic characteristics of gas–liquid ejectors , 2008 .

[8]  J. Fricke,et al.  Improved Transport Equations Including Correlations for Electron–Phonon Systems: Comparison with Exact Solutions in One Dimension , 1997 .

[9]  Armin Hafner,et al.  Application range of the HEM approach for CO2 expansion inside two-phase ejectors for supermarket refrigeration systems , 2015 .

[10]  Ebrahim Afshari,et al.  Optimization of geometric parameters for design a high-performance ejector in the proton exchange membrane fuel cell system using artificial neural network and genetic algorithm , 2014 .

[11]  Jean-Marie Seynhaeve,et al.  CFD analysis of a supersonic air ejector. Part II: Relation between global operation and local flow features , 2009 .

[12]  Alan A. Kornhauser,et al.  The Use of an Ejector as a Refrigerant Expander , 1990 .

[13]  Waclaw Kus,et al.  CFD-based shape optimisation of a CO2 two-phase ejector mixing section , 2016 .

[14]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[15]  Ashwin W. Patwardhan,et al.  Hydrodynamic aspects of ejectors , 2005 .

[16]  Zbigniew Bulinski,et al.  A comparison of heterogenous and homogenous models of two-phase transonic compressible CO2 flow through a heat pump ejector , 2010 .

[17]  Kwan-Soo Lee,et al.  Optimal shape and arrangement of staggered pins in the channel of a plate heat exchanger , 2001 .

[18]  W. Lee,et al.  A Pressure Iteration Scheme for Two-Phase Flow Modeling , 2002 .

[19]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[20]  M. Knudsen,et al.  Die maximale Verdampfungsgeschwindigkeit des Quecksilbers , 1915 .

[21]  Reinhard Radermacher,et al.  Online Approximation Assisted Multiobjective Optimization with Space Filling, Variance and Pareto Measures with Space Filling, Variance and Pareto Measures , 2010 .

[22]  H. Hertz,et al.  Ueber die Verdunstung der Flüssigkeiten, insbesondere des Quecksilbers, im luftleeren Raume , 1882 .

[23]  Jean-Marie Seynhaeve,et al.  CFD analysis of a supersonic air ejector. Part I: Experimental validation of single-phase and two-phase operation , 2009 .

[24]  Reinhard Radermacher,et al.  Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations , 2011 .

[25]  Genzi Li,et al.  Online and Offline Approximations for Population based Multi-objective Optimization , 2007 .