Wheelchair Models With Integrated Transfer Support Mechanisms and Passive Actuation

The concept presented in this paper describes two new approaches to integrate transfer support functions into wheelchairs. The goal is to relieve caregivers and nurses in their daily task of lifting patients from and to the wheelchair without the need of an additional external lift device, such as commonly used lifting cranes or lifting belts. The contributions of this paper are (i) the design of two different mechanical linkages, which realize two types of transfer motions, (ii) the selection of a passive actuator for weight compensation and simulation of the force induced by it (static design), as well as (iii) the experimental evaluation of the simulation using rapid prototyping functional models of the concepts. The results are two different design concepts, each of which can realize a particular, smooth transfer motion.

[1]  Gordon R. Pennock,et al.  Theory of Machines and Mechanisms , 1965 .

[2]  Charles E. Wilson,et al.  Kinematics and dynamics of machinery , 1983 .

[3]  A. Busch,et al.  Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers , 2011, Journal of occupational and environmental hygiene.

[4]  R. Jensen,et al.  Disabling back injuries among nursing personnel: research needs and justification. , 1987, Research in nursing & health.

[5]  Yoshiyuki Sankai,et al.  Bathing care assistance with robot suit HAL , 2009, 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[6]  L. Wolf,et al.  Reduction in injury rates in nursing personnel through introduction of mechanical lifts in the workplace. , 2003, American journal of industrial medicine.

[7]  B Owen,et al.  Reducing back stress to nursing personnel: an ergonomic intervention in a nursing home. , 1992, Ergonomics.

[8]  H. Harry Asada,et al.  A reconfigurable holonomic omnidirectional mobile bed with unified seating (RHOMBUS) for bedridden patients , 1997, Proceedings of International Conference on Robotics and Automation.

[9]  D. Cheap,et al.  Low back injuries in nursing staff. , 1987 .

[10]  McCarthy,et al.  Geometric Design of Linkages , 2000 .

[11]  A. Garg,et al.  An ergonomic evaluation of nursing assistants' job in a nursing home. , 1992, Ergonomics.

[12]  T. Läubli,et al.  Course of low back pain among nurses: a longitudinal study across eight years , 2003, Occupational and environmental medicine.

[13]  F Bell,et al.  Ergonomic aspects of equipment. , 1987, International journal of nursing studies.

[14]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[15]  Zhiwei Luo,et al.  Generation of Human Care Behaviors by Human-Interactive Robot RI-MAN , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[16]  W. Marras,et al.  A comprehensive analysis of low-back disorder risk and spinal loading during the transferring and repositioning of patients using different techniques. , 1999, Ergonomics.

[17]  Lorenzo T. D'Angelo,et al.  Individualized arm shells towards an ergonomic design of exoskeleton robots , 2014, 2014 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[18]  Feng-Li Lian,et al.  Design of multi-functional bed for bedridden patient , 2007, 2007 IEEE Workshop on Advanced Robotics and Its Social Impacts.

[19]  T. Yoshimitsu,et al.  Development of a power assist suit for nursing work , 2004, SICE 2004 Annual Conference.

[20]  Y. Iwano.  Development of reclining wheelchair with transfer assistance functions , 2012, The 2012 International Conference on Advanced Mechatronic Systems.