Application of lithium niobate etch stop technology to SAW pressure sensors

This paper presents a process technology to form thin diaphragms with sealed cavities in a lithium niobate (LiNbO3) wafer, which will be used for small and sensitive SAW-based pressure sensors. The process technology uses thermal inversion, wet etching with an electroplated Au mask, etch stop at the thermal inversion layer and Au-Au bonding. By the combination of an etch stop and pinhole-free masking, LiNbO3 thin diaphragms with thicknesses of several tens of mum to 10 mum were fabricated in 128deg Y cut LiNbO3 wafers. The Au-Au bonding of the LiNbO3 wafer gave hermetic sealing. In addition the etch profiles of the LiNbO3 wafer predicted by Wulff-Jaccodine plots and observed in experiments were compared, and good agreement was confirmed.

[1]  G. Rosenman,et al.  Domain inversion in heat‐treated LiNbO3 crystals , 1993 .

[2]  Wen Wang,et al.  A novel 440 MHz wireless SAW microsensor integrated with pressure–temperature sensors and ID tag , 2007 .

[3]  M. Esashi,et al.  P0-13 Phase Velocity Control of Surface Acoustic Waves Based on Surface Shorting and Electrical Field Application Using MEMS Switches , 2007, 2007 IEEE Ultrasonics Symposium Proceedings.

[4]  M. Esashi,et al.  P4L-4 Etch Rate Dependence on Crystal Orientation for Lithium Niobate , 2007, 2007 IEEE Ultrasonics Symposium Proceedings.

[5]  A. S. Kozlov,et al.  SAW pressure sensors , 1994, Conference Proceedings. 10th Anniversary. IMTC/94. Advanced Technologies in I & M. 1994 IEEE Instrumentation and Measurement Technolgy Conference (Cat. No.94CH3424-9).

[6]  K. N. Dollman,et al.  - 1 , 1743 .

[7]  Richard M. White,et al.  Acoustic sensors for physical, chemical and biochemical applications , 1998, Proceedings of the 1998 IEEE International Frequency Control Symposium (Cat. No.98CH36165).

[8]  Masayoshi Esashi,et al.  Design and Fabrication of Passive Wireless SAW Sensor for Pressure Measurement , 2008 .

[9]  Lisheng Huang,et al.  Discussion of domain inversion in LiNbO3 , 1994 .

[10]  Gary Cook,et al.  Microstructuring of lithium niobate using differential etch-rate between inverted and non-inverted ferroelectric domains , 1998 .

[11]  Hiroshi Shimizu,et al.  Ferroelectric domain inversion caused in LiNbO3 plates by heat treatment , 1987 .

[12]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[13]  G. Scholl,et al.  Theory and application of passive SAW radio transponders as sensors , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[14]  M. Esashi,et al.  Maximum accuracy evaluation scheme for wireless saw delay-line sensors , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  R. J. Jaccodine,et al.  Use of Modified Free Energy Theorems to Predict Equilibrium Growing and Etching Shapes , 1962 .

[16]  F. Seifert,et al.  Quartz pressure sensor based on SAW reflective delay line , 1996, 1996 IEEE Ultrasonics Symposium. Proceedings.

[17]  Leonhard Reindl,et al.  Monitoring the tire pressure at cars using passive SAW sensors , 1997, 1997 IEEE Ultrasonics Symposium Proceedings. An International Symposium (Cat. No.97CH36118).