Strengthening behavior of B doped TiC particles on an Al–Zn–Mg alloy

[1]  R. Radha,et al.  Electroless tin coated hydroxyapatite reinforced Mg–Sn alloy composite for enhanced bio corrosion resistance and bioactivity , 2020 .

[2]  G. Reddy,et al.  Microstructure and damping capacity of AA6061/graphite surface composites produced through friction stir processing , 2020 .

[3]  Qianqian Sun,et al.  Influence of a new AlTiC–B master alloy on the casting and extruding behaviors of 7050 alloys , 2020 .

[4]  Q. Jiang,et al.  Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites , 2020 .

[5]  Xiangfa Liu,et al.  Microstructure evolution and high temperature tensile properties of AlNp/Al–Fe composites induced by microalloying , 2019, Journal of Alloys and Compounds.

[6]  J. Selvam,et al.  Microstructural characterization of vanadium particles reinforced AA6063 aluminum matrix composites via friction stir processing with improved tensile strength and appreciable ductility , 2019, Composites Communications.

[7]  T. Xia,et al.  Preparation and synthesis thermokinetics of novel Al-Ti-C-La composite master alloys , 2019, Journal of Alloys and Compounds.

[8]  Y. Wang,et al.  Mechanism for Zr poisoning of Al-Ti-B based grain refiners , 2019, Acta Materialia.

[9]  L. Duan,et al.  Enhanced micro-hardness and wear resistance of Al-15Si/TiC fabricated by selective laser melting , 2018, Composites Communications.

[10]  Xiangfa Liu,et al.  Microstructure and mechanical properties at both room and high temperature of in-situ TiC reinforced Al–4.5Cu matrix nanocomposite , 2018, Journal of Alloys and Compounds.

[11]  T. Jin,et al.  Microstructure and mechanical properties of an in-situ TiB2/Al-Zn-Mg-Cu-Zr composite fabricated by Melt-SHS process , 2018 .

[12]  P. Li,et al.  Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld , 2017 .

[13]  Z. Fan,et al.  Grain refining mechanism in the Al/Al–Ti–B system , 2015 .

[14]  Zhou Li,et al.  Precipitation behaviour of Al–Zn–Mg–Cu alloy and diffraction analysis from η′ precipitates in four variants , 2014 .

[15]  Y. Birol.  Grain refining efficiency of Al-Ti-C alloys , 2006 .

[16]  D. Seidman,et al.  Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al-Sc alloys , 2005 .

[17]  K. B. Lee,et al.  Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique , 2005 .

[18]  W. Williams.  Physics of transition metal carbides , 1988 .