Microgravity Ignition Delay of Solid Fuels in Low-Velocity Flows

Experiments have been performed in microgravity and normal gravity to determine the effects of low-velocity airflows on the piloted ignition delay of solid fuels. Natural convection prevents material testing at the low oxidizer velocities encountered in space facilities (∼0.1 m/s); thus, it is necessary to conduct these tests in reduced gravity. Tests have been conducted with two types of fuels, polymethylmethacrylate (PMMA) and a polypropylene/glass fiber composite, aboard the NASA KC-135 aircraft, under air velocities below those induced by natural convection. The short reduced gravity period (∼25 s) provided by the aircraft limits the testing to high external fluxes (∼30 kW/m 2 ) so that the ignition delay times are shorter than the microgravity time. In normal gravity, the ignition delay and critical heat flux for ignition decrease as the forced-flow velocity decreases, until they reach minimum values that are limited by natural convection. The microgravity data indicate that ignition delay is further reduced as the air velocity is lowered. A theoretical model is used to predict the ignition delay for PMMA at low flow velocities in microgravity. The model predicts that the critical heat flux for ignition at the flow conditions expected in space facilities could be as much as half the value measured in normal gravity. The results are important because they imply that, in space facilities, ignition may occur more easily than in normal gravity. If the results are confirmed by long-term microgravity testing, they may have important implications for the fire safety design of space facilities.

[1]  T. J. Tanaka,et al.  Preliminary studies on the impact of smoke on digital equipment , 1995 .

[2]  S. L. Olson,et al.  Mechanisms of microgravity flame spread over a thin solid fuel - Oxygen and opposed flow effects , 1991 .

[3]  James G. Quintiere,et al.  Measurement of Material Flame Spread Properties , 1982 .

[4]  G. Lengelle,et al.  Thermal degradation kinetics and surface pyrolysis of vinyl polymers , 1970 .

[5]  Robert Friedman,et al.  Fire Safety in Extraterrestrial Environments , 1998 .

[6]  Y. Zhou,et al.  Test Method for Ranking the Fire Properties of Materials in Space Based Facilities , 1999 .

[7]  A. Fernandez-Pello,et al.  Oxidizer Flow Effects on the Flammability of Solid Combustibles , 2001 .

[8]  J. Quintiere A simplified theory for generalizing results from a radiant panel rate of flame spread apparatus , 1981 .

[9]  Y. Zhou,et al.  An enthalpy-temperature hybrid method for solving phase-change problems and its application to polymer pyrolysis and ignition , 2000 .

[10]  Gregorio López Juste,et al.  A Study of the Combustion Problems of Solid Materials at Conditions Existing in Space Stations , 1999 .

[11]  Arvind Atreya,et al.  Ignition of fires , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  T J Ohlemiller,et al.  Material flammability test assessment for Space Station Freedom , 1991 .

[13]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[14]  K. Sacksteder,et al.  Buoyant downward diffusion flame spread and extinction in partial-gravity accelerations , 1994 .

[15]  Dougal Drysdale,et al.  Flammability of plastics II: Critical mass flux at the firepoint , 1989 .

[16]  A. V. Ivanov,et al.  Experimental Verification of Material Flammability in Space , 1999 .

[17]  Jean-Louis Delfau,et al.  Experimental and Numerical Study of the Thermal Degradation of PMMA , 1987 .

[18]  A. C. Fernandez-Pello,et al.  Numerical modeling of endothermic pyrolysis and ignition delay of composite materials exposed to an external radiant heat flux , 2000 .

[19]  James G. Quintiere,et al.  New Concepts for Measuring Flame Spread Properties , 1984 .

[20]  A. Fernandez-Pello,et al.  Model of the Ignition and Flame Development on a Vaporizing Combustible Surface in a Stagnation Point Flow: Ignition by Vapor Fuel Radiation Absorption , 1988 .

[21]  J. G. Quintiere,et al.  Scale And Transport Considerations On Piloted Ignition Of Pmma , 2000 .