Impact of One Side Hydrophobic Gas Diffusion Layer on Water Removal Rate and Proton Exchange Membrane Fuel Cell Performance

[1]  Gholamreza Karimi,et al.  Experimental study on the effect of reactant flow arrangements on the current distribution in proton exchange membrane fuel cells , 2011 .

[2]  David Sinton,et al.  Liquid water transport between graphite paper and a solid surface , 2008 .

[3]  J. Caton,et al.  Monitoring an Electrode Flooding Through the Back Pressure in a Proton Exchange Membrane (PEM) Fuel Cell , 2008 .

[4]  C. Du,et al.  Treatment and characterization of gas diffusion layers by sucrose carbonization for PEMFC applications , 2008 .

[5]  Chao-Yang Wang,et al.  Liquid water transport in a mixed-wet gas diffusion layer of a polymer electrolyte fuel cell , 2008 .

[6]  Kendra V. Sharp,et al.  A design tool for predicting the capillary transport characteristics of fuel cell diffusion media using an artificial neural network , 2008 .

[7]  Werner Lehnert,et al.  Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography , 2007 .

[8]  N. Djilali,et al.  Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers , 2006 .

[9]  J. Pharoah.  Fluid Mechanics of Serpentine Flow Fields on a Porous Media , 2005 .

[10]  J. Newman,et al.  Modeling Two-Phase Behavior in PEFCs , 2004 .

[11]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[12]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[13]  Ned Djilali,et al.  A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell , 2003 .

[14]  J. Moreira.  Influence of the hydrophobic material content in the gas diffusion electrodes on the performance of a PEM fuel cell , 2003 .

[15]  F. Preli.  Technical Challenges for Fuel Cells in Mobile Applications , 2002 .

[16]  J. Meyers,et al.  Miniature fuel cells for portable power: Design considerations and challenges , 2002 .

[17]  K. Neoh,et al.  Plasma polymerization of allylpentafluorobenzene on copper surfaces , 2002 .

[18]  V. S. Bagotzky,et al.  The standard contact porosimetry , 2001 .

[19]  G. Squadrito,et al.  Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes , 2001 .

[20]  Tsutomu Ioroi,et al.  Iridium Oxide/Platinum Electrocatalysts for Unitized Regenerative Polymer Electrolyte Fuel Cells , 2000 .

[21]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[22]  Christopher E. Borroni-Bird,et al.  Fuel cell commercialization issues for light-duty vehicle applications , 1996 .

[23]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[24]  R. Borup,et al.  Design and Testing Criteria for Bipolar Plate Materials for Pem Fuel Cell Applications , 1995 .

[25]  H. Yasuda,et al.  Contact Angle of Water on Polymer Surfaces , 1994 .

[26]  R. Lemons.  Fuel cells for transportation , 1989 .

[27]  N. Morrow.  Capillary Pressure Correlations For Uniformly Wetted Porous Media , 1976 .

[28]  M. Schrader.  Ultrahigh vacuum techniques in the measurement of contact angles. IV. Water on graphite (0001) , 1975 .

[29]  N. Djilali,et al.  Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers , 2007 .

[30]  D. Bevers,et al.  Innovative production procedure for low cost PEFC electrodes and electrode/membrane structures , 1998 .