A 87 dB, 2.3 GHz, SiGe BiCMOS operational transconductance amplifier
暂无分享,去创建一个
This paper describes a 3.3 V, fully differential SiGe BiCMOS operational transconductance amplifier (OTA) for switched capacitor applications. The simulated DC gain of the OTA is 87 dB and its unity gain frequency is 2.3 GHz at a phase margin of 63 degrees. The OTA is optimally compensated for fast settling using a 0.6 pF capacitor, dissipates 17 mW power, has a differential output swing of 2.4 V and the differential input-referred noise PSD is 2.7 nV//spl radic/Hz. This OTA settles to 0.01% accuracy within 4.3 ns when configured in a closed loop with feedback factor /spl beta/ = 1/2 . The above specifications will allow realization of a 12-bit, 115 MS/s gain-of-2 sample and hold amplifier for use at the front end of a pipeline ADC. This design uses a BiCMOS technology that provides a 47 GHz f/sub t/ SiGe HBTs and 250 nm CMOS. Results are based on circuit level SpectreS simulations in Cadence, with foundry provided transistor models.
[1] Behzad Razavi,et al. Design of Analog CMOS Integrated Circuits , 1999 .
[2] Robert G. Meyer,et al. Analysis and Design of Analog Integrated Circuits , 1993 .
[3] Andrew Masami Abo,et al. Design for Reliability of Low-voltage, Switched-capacitor Circuits , 1999 .
[4] Robert G. Meyer,et al. Relationship between frequency response and settling time of operational amplifiers , 1974 .
[5] Alvin J. Joseph,et al. Transistor noise in SiGe HBT RF technology , 2001 .