Acoustic emissions document stress changes over many seismic cycles in stick‐slip experiments

[1] The statistics of large earthquakes commonly involve large uncertainties due to the lack of long-term, robust earthquake recordings. Small-scale seismic events are abundant and can be used to examine variations in fault structure and stress. We report on the connection between stress and microseismic event statistics prior to the possibly smallest earthquakes: those generated in the laboratory. We investigate variations in seismic b value of acoustic emission events during the stress buildup and release on laboratory-created fault zones. We show that b values mirror periodic stress changes that occur during series of stick-slip events, and are correlated with stress over many seismic cycles. Moreover, the amount of b value increase associated with slip events indicates the extent of the corresponding stress drop. Consequently, b value variations can be used to approximate the stress state on a fault: a possible tool for the advancement of time-dependent seismic hazard assessment. Citation: Goebel, T. H. W., D. Schorlemmer, T. W. Becker, G. Dresen, and C. G. Sammis (2013), Acoustic emissions document stress changes over many seismic cycles in stick-slip experiments, Geophys. Res. Lett., 40, 2049–2054, doi:10.1002/grl.50507.

[1]  Naoshi Hirata,et al.  Decade‐scale decrease inb value prior to the M9‐class 2011 Tohoku and 2004 Sumatra quakes , 2012 .

[2]  M. Wyss,et al.  Mapping asperities by minima of local recurrence time: San Jacinto‐Elsinore fault zones , 2000 .

[3]  J. Schmittbuhl,et al.  Fracture roughness and gouge distribution of a granite shear band , 2002 .

[4]  Forecast experiment: Do temporal and spatial b value variations along the Calaveras fault portend M ≥ 4.0 earthquakes? , 2007 .

[5]  T. Wong,et al.  Effect of clay content and mineralogy on frictional sliding behavior of simulated gouges: Binary and ternary mixtures of quartz, illite, and montmorillonite , 2010 .

[6]  S. Wiemer,et al.  Influence of pore‐pressure on the event‐size distribution of induced earthquakes , 2012 .

[7]  Danijel Schorlemmer,et al.  ALM: An Asperity-based Likelihood Model for California , 2007 .

[8]  D. Amitrano.  Brittle‐ductile transition and associated seismicity: Experimental and numerical studies and relationship with the b value , 2003 .

[9]  Danijel Schorlemmer,et al.  Earth science: Microseismicity data forecast rupture area , 2005, Nature.

[10]  Danijel Schorlemmer,et al.  Earthquake statistics at Parkfield: 2. Probabilistic forecasting and testing , 2004 .

[11]  O. Nishizawa,et al.  Quasi‐static fault growth and cracking in homogeneous brittle rock under triaxial compression using acoustic emission monitoring , 2000 .

[12]  S. Wiemer,et al.  Earthquake recurrence models fail when earthquakes fail to reset the stress field , 2012 .

[13]  D. Schorlemmer,et al.  Identifying fault heterogeneity through mapping spatial anomalies in acoustic emission statistics , 2011 .

[14]  Philip G. Meredith,et al.  TEMPORAL VARIATIONS IN SEISMICITY DURING QUASI-STATIC AND DYNAMIC ROCK FAILURE , 1990 .

[15]  Danijel Schorlemmer,et al.  Common dependence on stress for the two fundamental laws of statistical seismology , 2009, Nature.

[16]  Andrew J. Michael,et al.  Use of focal mechanisms to determine stress: A control study , 1987 .

[17]  Jochen Zschau,et al.  Correlating variations of b values and crustal deformations during the 1990s may have pinpointed the rupture initiation of the Mw=7.4 Izmit earthquake of 1999 August 17 , 2002 .

[18]  John W. Gephart,et al.  An improved method for determining the regional stress tensor using earthquake focal mechanism data: Application to the San Fernando Earthquake Sequence , 1984 .

[19]  Philip G. Meredith,et al.  A reinterpretation of the precursory seismic b-value anomaly from fracture mechanics , 1989 .

[20]  M. Imoto.  Changes in the magnitude—frequency b-value prior to large (M 6.0) earthquakes in Japan , 1991 .

[21]  M. Wyss,et al.  Mapping the frequency-magnitude distribution in asperities: An improved technique to calculate recurrence times? , 1997 .

[22]  R. P. Young,et al.  Fracture in Westerly Granite under AE Feedback and Constant Strain Rate Loading: Nucleation, Quasi-static Propagation, and the Transition to Unstable Fracture Propagation , 2006 .

[23]  P. Sammonds,et al.  TEMPORAL VARIATIONS IN SEISMIC EVENT RATE AND B-VALUES FROM STRESS-CORROSION CONSTITUTIVE LAWS , 1992 .

[24]  B. Smart,et al.  Microseismic properties of a homogeneous sandstone during fault nucleation and frictional sliding , 1994 .

[25]  C. Sammis,et al.  Triaxial testing of Lopez Fault gouge at 150 MPa mean effective stress , 1994 .

[26]  Yasuo Yabe,et al.  Frequency-Magnitude Characteristics Down to Magnitude -4.4 for Induced Seismicity Recorded at Mponeng Gold Mine, South Africa , 2010 .

[27]  M. Wyss.  Locked and creeping patches along the Hayward Fault, California , 2001 .

[28]  C. Scholz.  The frequency-magnitude relation of microfracturing in rock and its relation to earthquakes , 1968 .

[29]  M. Wyss,et al.  Earthquake statistics at Parkfield: 1. Stationarity of b values , 2004 .

[30]  D. Lockner,et al.  Quasi-static fault growth and shear fracture energy in granite , 1991, Nature.

[31]  M. Wyss,et al.  Variations in earthquake-size distribution across different stress regimes , 2005, Nature.

[32]  M. Wyss.  Changes of mean magnitude of Parkfield seismicity: A part of the precursory process? , 1990 .

[33]  P. Sammonds,et al.  Role of pore fluids in the generation of seismic precursors to shear fracture , 1992, Nature.

[34]  S. Wiemer,et al.  Asperity-based earthquake likelihood models f or Italy , 2010 .