Cladding WC-Co based materials to protect them from decarburization caused by the heat of the thermal spray gun

[1]  Shanglei Yang,et al.  Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces , 2016 .

[2]  Shiying Zhang,et al.  Wear and corrosion performance of WC-10Co4Cr coatings deposited by different HVOF and HVAF spraying processes , 2013 .

[3]  G. Sundararajan,et al.  A Comparison of Mechanical and Tribological Behavior of Nanostructured and Conventional WC-12Co Detonation-Sprayed Coatings , 2013, Journal of Thermal Spray Technology.

[4]  W. Ke,et al.  Corrosion of high‐velocity oxy‐fuel (HVOF) sprayed iron‐based amorphous metallic coatings for marine pump in sodium chloride solutions , 2012 .

[5]  S. Shugurov,et al.  Thermodynamic properties of the system MgO-B2O3 melts , 2010 .

[6]  Kanchan Kumari,et al.  Effect of microstructure on abrasive wear behavior of thermally sprayed WC–10Co–4Cr coatings , 2010 .

[7]  Fu-chi Wang,et al.  Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying , 2009 .

[8]  K. S. Kim,et al.  A study on HVOF coatings of micron and nano WC-Co powders , 2008 .

[9]  M. Gee,et al.  Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals , 2007 .

[10]  J. Guilemany,et al.  The enhancement of the properties of WC-Co HVOF coatings through the use of nanostructured and microstructured feedstock powders , 2006 .

[11]  J. Schoenung,et al.  Characterization of oxide scales formed on HVOF NiCrAlY coatings with various oxygen contents introduced during thermal spraying , 2004 .

[12]  J. Bisson,et al.  Thermal spraying of nanostructured cermet coatings , 2001 .

[13]  T. Fischer,et al.  Sliding and abrasive wear resistance of thermal-sprayed WC-CO coatings , 2001 .

[14]  B. Kear,et al.  Thermal sprayed nanostructured WC/Co hardcoatings , 2000 .

[15]  P. H. Shipway,et al.  Microstructural evolution in thermally sprayed WC-Co coatings: Comparison between nanocomposite and conventional starting powders , 2000 .

[16]  J. Nutting,et al.  Characterization of the W2C phase formed during the high velocity oxygen fuel spraying of a WC + 12 pct Co powder , 1999 .

[17]  H. Lovelock.  Powder/processing/structure relationships in WC-Co thermal spray coatings: A review of the published literature , 1998 .

[18]  A. J. Slifka,et al.  Thermal Conductivity of Magnesium Oxide From Absolute, Steady-State Measurements , 1998, Journal of research of the National Institute of Standards and Technology.

[19]  J. Martín,et al.  A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures , 1998 .

[20]  Lech Pawlowski,et al.  The Science and Engineering of Thermal Spray Coatings , 1995 .

[21]  A. Karimi,et al.  Microstructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WCCo(Cr) coatings , 1993 .

[22]  C. Moreau,et al.  Plasma spraying of carbon-coated TiC powders in air and inert atmosphere , 1991 .

[23]  R. F. Porter,et al.  A Thermodynamic and Spectroscopic Study of Gaseous Magnesium Oxide , 1954 .

[24]  P. Shipway,et al.  Microscale abrasion–corrosion behaviour of WC–Co hardmetals and HVOF sprayed coatings , 2005 .