Metal organic frameworks as a compatible reinforcement in a biopolymer bone scaffold

The insufficient mechanical strength and slow degradation rate of poly-L-lactic acid (PLLA) limit its applications in bone repair. In this study, zeolitic imidazolate framework-8 (ZIF-8), one typical metal organic framework, was introduced into a laser-sintered PLLA scaffold. The results showed that the ZIF-8 formed favorable interface bonding with PLLA due to its inherent hydrophobicity and abundant organic ligands. Meanwhile, it served as an efficient nucleating site and increased the crystallinity of PLLA. Thus, the tensile and compressive strength was improved by 36.9% and 85.6%, respectively. On the other hand, ZIF-8 was biodegradable and its degradation rate would speed up in an acid environment caused by the degradation of PLLA. In this condition, numerous cavities resulting from the degradation of ZIF-8 on the scaffold surface promoted the invasion of the immersion solution, which considerably enhanced the degradation rate. Besides, ZIF-8 released nutrient Zn element during degradation, which favored cell adhesion, proliferation and differentiation. It was suggested that the scaffold showed great potential as a candidate for bone implantation.

[1]  T. Tan,et al.  The in-situ synthesis of a high-flux ZIF-8/polydimethylsiloxane mixed matrix membrane for n-butanol pervaporation , 2020 .

[2]  C. Shuai,et al.  Surface modification enhances interfacial bonding in PLLA/MgO bone scaffold. , 2020, Materials science & engineering. C, Materials for biological applications.

[3]  You-wen Yang,et al.  Fabrication and properties of zirconia/hydroxyapatite composite scaffold based on digital light processing , 2020 .

[4]  C. Shuai,et al.  Selective laser melted Fe-Mn bone scaffold: microstructure, corrosion behavior and cell response , 2020, Materials Research Express.

[5]  C. Shuai,et al.  A magnetic micro-environment in scaffolds for stimulating bone regeneration , 2020 .

[6]  C. Shuai,et al.  Mg bone implant: Features, developments and perspectives , 2020 .

[7]  Benwei Zhu,et al.  Efficient recovery of the volatile aroma components from blackberry juice using a ZIF-8/PDMS hybrid membrane , 2020 .

[8]  C. Shuai,et al.  Phosphonic Acid Coupling Agent Modification of HAP Nanoparticles: Interfacial Effects in PLLA/HAP Bone Scaffold , 2020, Polymers.

[9]  A. Kaiser,et al.  Electrospinning of Metal–Organic Frameworks for Energy and Environmental Applications , 2019, Advanced science.

[10]  Xiaoling Li,et al.  LncRNA ODIR1 inhibits osteogenic differentiation of hUC-MSCs through the FBXO25/H2BK120ub/H3K4me3/OSX axis , 2019, Cell Death & Disease.

[11]  C. Shuai,et al.  Molybdenum disulfide nanosheets embedded with nanodiamond particles: co-dispersion nanostructures as reinforcements for polymer scaffolds , 2019 .

[12]  Xuying Liu,et al.  Superhydrophobic Porous PLLA Sponges with Hierarchical Micro‐/Nano‐Structures for High‐Efficiency Self‐Cleaning , 2019, Macromolecular Chemistry and Physics.

[13]  Yao Meng,et al.  Nano-SiC reinforced Zn biocomposites prepared via laser melting: Microstructure, mechanical properties and biodegradability , 2019, Journal of Materials Science & Technology.

[14]  R. Benavente,et al.  Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications. , 2019, Acta biomaterialia.

[15]  Q. Fu,et al.  Fabrication of PLA/CNC/CNT conductive composites for high electromagnetic interference shielding based on Pickering emulsions method , 2019, Composites Part A: Applied Science and Manufacturing.

[16]  K. Kerl,et al.  Zeolitic Imidazolate Framework‐8 as pH‐Sensitive Nanocarrier for “Arsenic Trioxide” Drug Delivery , 2019, Chemistry.

[17]  Xiwen He,et al.  pH-Responsive Polymer-Stabilized ZIF-8 Nanocomposite for Fluorescence and Magnetic Resonance Dual-Modal Imaging-Guided Chemo/Photodynamic Combinational Cancer Therapy. , 2019, ACS applied materials & interfaces.

[18]  C. Shuai,et al.  Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and properties , 2019, Journal of Alloys and Compounds.

[19]  C. Shuai,et al.  nMgO-incorporated PLLA bone scaffolds: Enhanced crystallinity and neutralized acidic products , 2019, Materials & Design.

[20]  Lan Li,et al.  Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility , 2019, Journal of Materials Science & Technology.

[21]  C. Shuai,et al.  Highly biodegradable and bioactive Fe-Pd-bredigite biocomposites prepared by selective laser melting , 2019, Journal of advanced research.

[22]  C. López,et al.  Template-Free, Surfactant-Mediated Orientation of Self-Assembled Supercrystals of Metal-Organic Framework Particles. , 2019, Small.

[23]  H. Takehara,et al.  Mechanical strength evaluation of crystalline poly(L-lactic acid) fabricated by replica micromolding for bioabsorbable microneedle devices , 2019, Japanese Journal of Applied Physics.

[24]  Youngkwan Lee,et al.  Ferrocene-Encapsulated Zn Zeolitic Imidazole Framework (ZIF-8) for Optical and Electrochemical Sensing of Amyloid-β Oligomers and for the Early Diagnosis of Alzheimer's Disease. , 2019, ACS applied materials & interfaces.

[25]  I. Ghasemi,et al.  A study on the crystallization kinetics of PLLA in the presence of Graphene Oxide and PEG-grafted-Graphene Oxide: Effects on the nucleation and chain mobility , 2019, Composites Part B: Engineering.

[26]  Jun Xu,et al.  Astrocytic miR-324-5p is essential for synaptic formation by suppressing the secretion of CCL5 from astrocytes , 2019, Cell Death & Disease.

[27]  P. Ma,et al.  Design of Supertoughened and Heat-Resistant PLLA/Elastomer Blends by Controlling the Distribution of Stereocomplex Crystallites and the Morphology , 2019, Macromolecules.

[28]  Ming Wang,et al.  Percolation behavior of electromagnetic interference shielding in polymer/multi-walled carbon nanotube nanocomposites , 2019, Composites Science and Technology.

[29]  Shuping Peng,et al.  Additive manufacturing of bone scaffolds , 2018, International journal of bioprinting.

[30]  C. Shuai,et al.  Functionalized BaTiO3 enhances piezoelectric effect towards cell response of bone scaffold. , 2019, Colloids and surfaces. B, Biointerfaces.

[31]  Shicheng Guo,et al.  Epigenetic silencing of ZNF132 mediated by methylation-sensitive Sp1 binding promotes cancer progression in esophageal squamous cell carcinoma , 2018, Cell Death & Disease.

[32]  Shengqian Ma,et al.  Mussel-inspired polydopamine chemistry to modulate template synthesis of 1D metal–organic framework superstructures , 2018 .

[33]  Q. Hao,et al.  ZIF-8 nanocrystals derived N-doped carbon decorated graphene sheets for symmetric supercapacitors , 2018, Electrochimica Acta.

[34]  Yunbing Wang,et al.  High-performance porous polylactide stereocomplex crystallite scaffolds prepared by solution blending and salt leaching. , 2018, Materials science & engineering. C, Materials for biological applications.

[35]  Chi Wu,et al.  Biodegradable Poly(l-lactic acid) (PLLA) Coatings Fabricated from Nonsolvent Induced Phase Separation for Improving Corrosion Resistance of Magnesium Rods in Biological Fluids. , 2018, Langmuir : the ACS journal of surfaces and colloids.

[36]  Xuequan Zhang,et al.  Tumor-pH-Sensitive PLLA-Based Microsphere with Acid Cleavable Acetal Bonds on the Backbone for Efficient Localized Chemotherapy. , 2018, Biomacromolecules.

[37]  Christian J. Doonan,et al.  Biocompatibility characteristics of the metal organic framework ZIF-8 for therapeutical applications , 2018, Applied Materials Today.

[38]  Jingjing Tang,et al.  Polymorphism, thermal stability and enzymatic degradation of poly(1,4-butylene adipate) tailored by a benzene-1,3,5-tricarboxamide-based nucleating agent , 2018, Journal of Materials Science.

[39]  D. Goldberg,et al.  Physiochemical Characteristics of Poly-L-Lactic Acid (PLLA) , 2018, Aesthetic surgery journal.

[40]  C. Schick,et al.  Optical Microscopy to Study Crystal Nucleation in Polymers Using a Fast Scanning Chip Calorimeter for Precise Control of the Nucleation Pathway , 2018 .

[41]  S. Afrin,et al.  Determination of Serum Copper and Zinc Level of Bangladeshi Breast Cancer Patients , 2018 .

[42]  Haimu Ye,et al.  Distinctive Tensile Properties of the Blends of Poly(l-lactic acid) (PLLA) and Poly(butylene succinate) (PBS) , 2018, Journal of Polymers and the Environment.

[43]  R. Farahzadi,et al.  Zinc Sulphate Mediates the Stimulation of Cell Proliferation of Rat Adipose Tissue-Derived Mesenchymal Stem Cells Under High Intensity of EMF Exposure , 2017, Biological Trace Element Research.

[44]  M. L. Young,et al.  Biological Responses and Mechanisms of Human Bone Marrow Mesenchymal Stem Cells to Zn and Mg Biomaterials. , 2017, ACS applied materials & interfaces.

[45]  E. Lizundia,et al.  Light and gas barrier properties of PLLA/metallic nanoparticles composite films , 2017 .

[46]  Xinlong Wang,et al.  Degradable Poly(lactic acid)/Metal–Organic Framework Nanocomposites Exhibiting Good Mechanical, Flame Retardant, and Dielectric Properties for the Fabrication of Disposable Electronics , 2017 .

[47]  G. G. Peters,et al.  Quiescent crystallization of poly(lactic acid) studied by optical microscopy and light‐scattering techniques , 2017 .

[48]  Donghui Wang,et al.  Multifunctions of dual Zn/Mg ion co-implanted titanium on osteogenesis, angiogenesis and bacteria inhibition for dental implants. , 2017, Acta biomaterialia.

[49]  P. J. A. Lohmeijer,et al.  光学顕微鏡と光散乱法で調べたポリ(乳酸)の静止結晶化【Powered by NICT】 , 2017 .

[50]  Binghong Luo,et al.  Synergistic reinforcing and toughening of poly(l-lactide) composites with surface-modified MgO and chitin whiskers , 2016 .

[51]  M. Salmerón-Sánchez,et al.  PLLA/ZnO nanocomposites: Dynamic surfaces to harness cell differentiation. , 2016, Colloids and surfaces. B, Biointerfaces.

[52]  Xinlong Wang,et al.  Non-isothermal crystallization kinetics, thermal degradation behavior and mechanical properties of poly(lactic acid)/MOF composites prepared by melt-blending methods , 2016 .

[53]  M. Misra,et al.  Crystallization behavior and morphology of polylactic acid (PLA) with aromatic sulfonate derivative , 2016 .

[54]  Hui Liang,et al.  The crystallization behaviors and mechanical properties of poly(L-lactic acid)/magnesium oxide nanoparticle composites , 2016 .

[55]  Kedong Song,et al.  Fabrication and Cell Responsive Behavior of Macroporous PLLA/Gelatin Composite Scaffold with Hierarchical Micro-Nano Pore Structure , 2015, Nanomaterials.

[56]  Wei Yang,et al.  Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites , 2014 .

[57]  H. Takikawa,et al.  Physical Properties, Crystallization, and Thermal/Hydrolytic Degradation of Poly(L‐lactide)/Nano/Micro‐Diamond Composites , 2013 .

[58]  Q. Cai,et al.  Electrospun magnetic poly(L-lactide) (PLLA) nanofibers by incorporating PLLA-stabilized Fe3O4 nanoparticles. , 2013, Materials science & engineering. C, Materials for biological applications.

[59]  Qi Zhou,et al.  Functionalized cellulose nanocrystals as biobased nucleation agents in poly(l-lactide) (PLLA) – Crystallization and mechanical property effects , 2010 .

[60]  M. Walton,et al.  Long-term in vivo Degradation of Poly-L-lactide (PLLA) in Bone , 2007, Journal of biomaterials applications.

[61]  J. Adcock,et al.  Polarized C-H Groups as Novel Hydrogen-Bond Donors in Hydryl-F-alkyl Esters: Unequivocal Examples of the Pinchas Effect , 1995 .