Feasibility study on 3-D shape analysis of high-aspect-ratio features using through-focus scanning optical microscopy.

In-line metrologies currently used in the semiconductor industry are being challenged by the aggressive pace of device scaling and the adoption of novel device architectures. Metrology and process control of three-dimensional (3-D) high-aspect-ratio (HAR) features are becoming increasingly important and also challenging. In this paper we present a feasibility study of through-focus scanning optical microscopy (TSOM) for 3-D shape analysis of HAR features. TSOM makes use of 3-D optical data collected using a conventional optical microscope for 3-D shape analysis. Simulation results of trenches and holes down to the 11 nm node are presented. The ability of TSOM to analyze an array of HAR features or a single isolated HAR feature is also presented. This allows for the use of targets with area over 100 times smaller than that of conventional gratings, saving valuable real estate on the wafers. Indications are that the sensitivity of TSOM may match or exceed the International Technology Roadmap for Semiconductors (ITRS) measurement requirements for the next several years. Both simulations and preliminary experimental results are presented. The simplicity, lowcost, high throughput, and nanometer scale 3-D shape sensitivity of TSOM make it an attractive inspection and process monitoring solution for nanomanufacturing.

[1]  Erik Novak,et al.  TSOM method for semiconductor metrology , 2011, Advanced Lithography.

[2]  Elina Färm,et al.  Dense high aspect ratio hydrogen silsesquioxane nanostructures by 100 keV electron beam lithography , 2010, Nanotechnology.

[3]  Aaron Cordes,et al.  Gaps analysis for CD metrology beyond the 22nm node , 2013, Advanced Lithography.

[4]  E A Patterson,et al.  Three‐dimensional automated nanoparticle tracking using Mie scattering in an optical microscope , 2011, Journal of microscopy.

[5]  Steffen Marschmeyer,et al.  Through silicon via profile metrology of Bosch etching process based on spectroscopic reflectometry , 2015 .

[6]  Alok Vaid,et al.  Material contrast based inline metrology: process verification and control using back scattered electron imaging on CD-SEM , 2013, Advanced Lithography.

[7]  Arvind Kumar,et al.  Three-dimensional integrated circuits , 2006, IBM J. Res. Dev..

[8]  Tianming Bao,et al.  Improved dimension and shape metrology with versatile atomic force microscopy , 2007, SPIE Advanced Lithography.

[9]  A. Sakdinawat,et al.  Ultra-high aspect ratio high-resolution nanofabrication for hard X-ray diffractive optics , 2014, Nature Communications.

[10]  Richard M. Silver,et al.  Nanometrology using a through-focus scanning optical microscopy method , 2011 .

[11]  Dean Dawson,et al.  Improving sidewall profile metrology with enhanced 3D-AFM , 2008, Lithography Asia.

[12]  Richard Kasica,et al.  Nanoparticle size determination using optical microscopes , 2014 .

[13]  Ravikiran Attota,et al.  Through-focus scanning-optical-microscope imaging method for nanoscale dimensional analysis. , 2008, Optics letters.

[14]  András E. Vladár,et al.  A method to determine the number of nanoparticles in a cluster using conventional optical microscopes , 2015 .

[15]  Makoto Nakamura,et al.  Direct Depth Measurement Tool of High Aspect Ratio Via-Hole for Three-Dimensional Stacked Devices (Proceedings of the 6th International Symposium on Practical Surface Analysis (PSA-13)) , 2014 .

[16]  Tianming Bao,et al.  Improving dry etch control for contact plugs in advanced DRAM manufacturing , 2008, SPIE Advanced Lithography.

[17]  Richard A. Allen,et al.  Metrology needs for through-silicon via fabrication , 2014 .

[18]  Yi-Sha Ku,et al.  In-line metrology of 3D interconnect processes , 2012, Advanced Lithography.

[19]  Hyeonggon Kang,et al.  Parameter optimization for through-focus scanning optical microscopy. , 2016, Optics express.

[20]  Sergey Koptyaev,et al.  Motion-free all optical inspection system for nanoscale topology control. , 2014, Optics express.

[21]  R. Leach,et al.  The European nanometrology landscape , 2011, Nanotechnology.

[22]  Benjamin Bunday,et al.  Scanning electron microscopy imaging of ultra-high aspect ratio hole features , 2012, Advanced Lithography.

[23]  Sergey Koptyaev,et al.  Through-focus scanning optical microscopy (TSOM) considering optical aberrations: practical implementation. , 2015, Optics express.

[24]  Yi-Sha Ku.  Spectral reflectometry for metrology of three-dimensional through-silicon vias , 2014 .

[25]  Ronald G. Dixson,et al.  Resolving three-dimensional shape of sub-50 nm wide lines with nanometer-scale sensitivity using conventional optical microscopes , 2014 .

[26]  Alok Vaid,et al.  Solving next generation (1x node) metrology challenges using advanced CDSEM capabilities: tilt, high energy and backscatter imaging , 2015, Advanced Lithography.

[27]  Benjamin Bunday,et al.  HVM metrology challenges towards the 5nm node , 2016, SPIE Advanced Lithography.

[28]  Richard A. Allen,et al.  Invited) Metrology for 3D Integration , 2014 .

[29]  Yuuki Iwaki,et al.  3D-profile measurement of advanced semiconductor features by reference metrology , 2016, SPIE Advanced Lithography.

[30]  Ravikiran Attota.  Noise analysis for through-focus scanning optical microscopy. , 2016, Optics letters.

[31]  Harald Bosse,et al.  Current limitations of SEM and AFM metrology for the characterization of 3D nanostructures , 2011 .