Fundamentals of Slurry Design for CMP of Metal and Dielectric Materials

The formulation of slurries for chemical-mechanical planarization (CMP) is currently considered more of an art than a science, due to the lack of understanding of the wafer, slurry, and pad interactions involved. Several factors, including the large number of input variables for slurries and the synergistic interplay among input variables and output parameters, further complicate our ability to understand CMP phenomena. This article provides a fundamental basis for the choice of chemical additives and particles needed for present-day and next-generation slurry design. The effect of these components on nanoscale and microscale interaction phenomena is investigated. Methodologies are suggested for the development of next-generation slurries required to overcome CMP challenges related to defectivity and the surface topography of soft materials such as low-κ dielectrics and copper.

[1]  D. Hetherington,et al.  Atomic force microscopy, lateral force microscopy, and transmission electron microscopy investigations and adhesion force measurements for elucidation of tungsten removal mechanisms , 1999 .

[2]  D. J. Pearson,et al.  Chemical‐Mechanical Polishing for Fabricating Patterned W Metal Features as Chip Interconnects , 1991 .

[3]  S. Raghavan,et al.  Electrochemical Measurements during the Chemical Mechanical Polishing of Tungsten Thin Films , 1997 .

[4]  David J. Stein,et al.  Investigation of the Kinetics of Tungsten Chemical Mechanical Polishing in Potassium Iodate‐Based Slurries: I. Role of Alumina and Potassium lodate , 1999 .

[5]  Ronald J. Gutmann,et al.  Chemical Mechanical Planarization of Microelectronic Materials , 1997 .

[6]  R. Singh,et al.  Enhanced Tungsten Chemical Mechanical Polishing Using Stable Alumina Slurries , 1999 .

[7]  A. Rabinovich,et al.  Investigation of Self-Assembled Surfactant Structures at the Solid−Liquid Interface Using FT-IR/ATR , 2001 .

[8]  L. Cook.  Chemical processes in glass polishing , 1990 .

[9]  Goodarz Ahmadi,et al.  A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process , 2001 .

[10]  Uday Mahajan,et al.  Effect of Particle Size during Tungsten Chemical Mechanical Polishing , 1999 .

[11]  R. Singh,et al.  General solution for Poisson-Boltzmann equation in semiinfinite planar symmetry. , 2002, Journal of colloid and interface science.

[12]  R. J. Hunter,et al.  Introduction To Modern Colloid Science , 1993 .

[13]  B. Moudgil,et al.  Effect of Particle Size of Chemical Mechanical Polishing Slurries for Enhanced Polishing with Minimal Defects , 2000 .

[14]  Flatt,et al.  Synthesis of Microporous Silica Spheres. , 2000, Journal of colloid and interface science.

[15]  S. Kondo,et al.  Abrasive-Free Polishing for Copper Damascene Interconnection , 2000 .

[16]  David J. Stein,et al.  Investigation of the Kinetics of Tungsten Chemical Mechanical Polishing in Potassium Iodate‐Based Slurries: II. Roles of Colloid Species and Slurry Chemistry , 1999 .

[17]  M. J. Rosen.  Surfactants and Interfacial Phenomena , 1978 .

[18]  Frank G. Shi,et al.  CHEMICAL MECHANICAL POLISHING : THRESHOLD PRESSURE AND MECHANISM , 1999 .

[19]  D. Landolt,et al.  Wear‐Accelerated Corrosion of Passive Metals in Tribocorrosion Systems , 1998 .

[20]  W. Tseng,et al.  A Comparative Study on the Roles of Velocity in the Material Removal Rate during Chemical Mechanical Polishing , 1999 .

[21]  Bau-Tong Dai,et al.  Modeling of the Wear Mechanism during Chemical‐Mechanical Polishing , 1996 .

[22]  Lita Shon-Roy.  CMP: Market trends and technology , 2000 .

[23]  B. Moudgil,et al.  Correlation of Particulate Dispersion Stability with the Strength of Self-Assembled Surfactant Films , 2000 .