The effect of mechanically and chemically activated fly ashes on mortar properties

Abstract Fly ash is a waste material from coal-burning power plants that consume pulverized solid fuels. Two fly ashes from Asturias (Spain) were activated mechanically by wet milling and chemically by leaching with sulfuric acid. The activated fly ashes were characterized in terms of physico-chemical characterization, granulometry, density, blaine, BET, XRD and SEM. A comparative study was carried out of several mortars, in some cases using different additions of silica fume or activated fly ash. The influence that these additives have on the mechanical resistance of the mortars was studied. As well as the possible use of these activated fly ashes as a replacement for silica fume in producing high-strength mortar or concrete. It was found that mortars containing activated fly ash presented higher compressive strengths. A mercury intrusion porosimetry study was carried out on cement mortars made with mineral additives such as silica fume and activated fly ashes. In general, the porosities values of these mortars showed that mineral admixtures improved mechanical resistance due to the decrease in pore size.

[1]  David Darwin,et al.  Role of Silica Fume in Compressive Strength of Cement Paste, Mortar, and Concrete , 1992 .

[2]  Michael D.A. Thomas,et al.  Properties of Concrete Containing Ultra-Fine Fly Ash , 2003 .

[3]  J. Sancho,et al.  Asturian fly ash as a heavy metals removal material , 1998 .

[4]  J. Monzó,et al.  Early-strength development of portland cement mortars containing air classified fly ashes , 1995 .

[5]  Ramazan Demirboga,et al.  Influence of mineral admixtures on thermal conductivity and compressive strength of mortar , 2003 .

[6]  J. Ayala,et al.  Variation in fly ash properties with milling and acid leaching , 2005 .

[7]  H. Toutanji,et al.  The influence of silica fume on the compressive strength of cement paste and mortar , 1995 .

[8]  K. Kendall,et al.  Flexural strength and porosity of cements , 1981, Nature.

[9]  G. Rao,et al.  INVESTIGATIONS ON THE PERFORMANCE OF SILICA FUME-INCORPORATED CEMENT PASTES AND MORTARS , 2003 .

[10]  X. Carceller,et al.  Activación de cenizas volantes para retención de gases contaminantes , 2003 .

[11]  P. Türker,et al.  Effects of fly ash particle size on strength of Portland cement fly ash mortars , 1998 .

[12]  V. M. Malhotra,et al.  Advances in concrete technology , 1992 .

[13]  Kevin Kendall,et al.  The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials , 1983, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[14]  Nader Ghafoori.  Utilization of industrial by-products for construction materials : proceedings of the session sponsored by the Materials Engineering Division in conjunction with the ASCE National Convention in Dallas, Texas, October 24-28, 1993 , 1993 .

[15]  Karthik H. Obla,et al.  Ultra Fine Fly Ash for High Performance Concrete , 2001 .

[16]  David Dickson.  Genetic engineering: Planning bugs , 1981, Nature.

[17]  V. S. Ramachandran,et al.  Concrete Admixtures Handbook: Properties, Science and Technology , 1996 .

[18]  J. G. Cabrera,et al.  The effect of mineral admixtures on the properties of high-performance concrete , 2000 .

[19]  Chai Jaturapitakkul,et al.  USE OF GROUND COARSE FLY ASH AS A REPLACEMENT OF CONDENSED SILICA FUME IN PRODUCING HIGH-STRENGTH CONCRETE , 2004 .