Cross‐level fragility analysis of modularized suspended buildings based on experimentally validated numerical models
暂无分享,去创建一个
[1] Seyed Mehdi Zahrai,et al. Seismic reliability-based design of inelastic base-isolated structures with lead-rubber bearing systems , 2018, Soil Dynamics and Earthquake Engineering.
[2] Donatello Cardone,et al. Developing collapse fragility curves for base‐isolated buildings , 2018, Earthquake Engineering & Structural Dynamics.
[3] Behrouz Asgarian,et al. Seismic performance evaluation of steel moment resisting frames through incremental dynamic analysis , 2010 .
[4] Jong Wha Bai,et al. Seismic fragility estimates of a moment-resisting frame building controlled by MR dampers using performance-based design , 2016 .
[5] Wensu Chen,et al. Review of bolted inter-module connections in modular steel buildings , 2019, Journal of Building Engineering.
[6] Siavash Soroushian,et al. Fragility Analysis of Suspended Ceiling Systems in a Full-Scale Experiment , 2019, Journal of Structural Engineering.
[7] Gang Wu,et al. Optimal lateral aseismic performance analysis of mega-substructure system with modularized secondary structures , 2017 .
[8] Georgios S. Papavasileiou,et al. Fragility curves for mixed concrete/steel frames subjected to seismic excitation , 2019, Soil Dynamics and Earthquake Engineering.
[9] John L. Harris,et al. Seismic damage and fragility analysis of structures with tuned mass dampers based on plastic energy , 2012 .
[10] Brendon A. Bradley,et al. Improved seismic hazard model with application to probabilistic seismic demand analysis , 2007 .
[11] Reginald DesRoches,et al. Methodology for the development of analytical fragility curves for retrofitted bridges , 2008 .
[12] Jian Zhang,et al. Fragility Function of Base Isolated Highway Bridges , 2008 .
[13] T. Soong,et al. Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components , 2003 .
[14] Yaohua Zhang,et al. Asynchronous driving principle and its application to vibration control , 2000 .
[15] Agathoklis Giaralis,et al. Optimal tuned mass‐damper‐inerter (TMDI) design for seismically excited MDOF structures with model uncertainties based on reliability criteria , 2018 .
[16] Chunlin Wang,et al. Dynamic Responses of Core-Tubes with Semi-Flexible Suspension Systems Linked by Viscoelastic Dampers under Earthquake Excitation , 2011 .
[17] Hussam Mahmoud,et al. A combinatorial optimization approach for multi-hazard design of building systems with suspended floor slabs under wind and seismic hazards , 2017 .
[18] Andrew S. Whittaker,et al. Seismic Fragility of Suspended Ceiling Systems , 2007 .
[19] Paolo Castaldo,et al. Seismic fragility and reliability of structures isolated by friction pendulum devices: seismic reliability‐based design (SRBD) , 2017 .
[20] Gang Wu,et al. Seismic control of modularized suspended structures with optimal vertical distributions of the secondary structure parameters , 2019, Engineering Structures.
[21] Andrea Dall'Asta,et al. Performance-based seismic risk assessment for buildings equipped with linear and nonlinear viscous dampers , 2014 .
[22] John L. Harris,et al. Seismic fragility and cost analyses of actively controlled structures , 2013 .
[23] Jorge Daniel Riera,et al. Reliability based assessment of the effectiveness of metallic dampers in buildings under seismic excitations , 2004 .
[24] Dimitrios Vamvatsikos,et al. Seismic Fragility Functions via Nonlinear Response History Analysis , 2018, Journal of Structural Engineering.
[25] J. Matos,et al. Uncertainty analysis of structural systems by perturbation techniques , 2008 .
[26] Wahid Ferdous,et al. New advancements, challenges and opportunities of multi-storey modular buildings – A state-of-the-art review , 2019, Engineering Structures.
[27] Halil Sezen,et al. Evaluation, modeling, and analysis of shipping container building structures , 2012 .
[28] Jack P. Moehle,et al. Seismic Performance Evaluation of Facilities: Methodology and Implementation , 2009 .
[29] Zhao-Dong Xu,et al. Effect of frequency dependence of large mass ratio viscoelastic tuned mass damper on seismic performance of structures , 2020 .
[30] M. Altug Erberik,et al. Fragility-based assessment of typical mid-rise and low-rise RC buildings in Turkey , 2008 .
[31] Dimitri V. Val,et al. Reliability evaluation in nonlinear analysis of reinforced concrete structures , 1997 .
[32] Jian Zhang,et al. Evaluating effectiveness and optimum design of isolation devices for highway bridges using the fragility function method , 2009 .
[33] Liborio Cavaleri,et al. Incremental dynamic based fragility assessment of reinforced concrete structures: Stationary vs. non-stationary artificial ground motions , 2017 .
[34] Yuxin Liu,et al. Seismic Performance and Storey-Based Stability of Suspended Buildings , 2014 .
[35] Akira Wada,et al. Development of the core‐suspended isolation system , 2011 .
[36] Matjaž Dolšek,et al. The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings , 2013 .
[37] E. A. Clark,et al. CEB-FIP Model Code 1990 , 1995 .
[38] Reginald DesRoches,et al. Seismic fragility methodology for highway bridges using a component level approach , 2006 .
[39] Amr S. Elnashai,et al. Seismic fragility relationships of reinforced concrete high-rise buildings , 2009 .
[40] Hao Wu,et al. Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs , 2019, Bulletin of Earthquake Engineering.
[41] Maged A. Youssef,et al. Seismic fragility assessment of superelastic shape memory alloy reinforced concrete shear walls , 2018, Journal of Building Engineering.
[42] Xu Chen,et al. System Fragility Assessment of Tall-Pier Bridges Subjected to Near-Fault Ground Motions , 2020 .
[43] Raffaele Landolfo,et al. Out-of-plane seismic design by testing of non-structural lightweight steel drywall partition walls , 2018, Thin-Walled Structures.
[44] Qing Jiang,et al. Experimental Study on the Seismic Performance of Superimposed RC Shear Walls with Enhanced Horizontal Joints , 2019 .
[45] Salvatore Perno,et al. Dynamic response and optimal design of structures with large mass ratio TMD , 2012 .
[46] Mehdi Shokouhian,et al. Optimum Parameters for Large Mass Ratio TMDs Using Frequency Response Function , 2019, Journal of Earthquake Engineering.
[47] Andre Filiatrault,et al. Experimental Seismic Fragility of Cold-Formed Steel Framed Gypsum Partition Walls , 2013 .
[48] Oren Lavan,et al. Seismic behavior of viscously damped yielding frames under structural and damping uncertainties , 2013, Bulletin of Earthquake Engineering.