Three-dimensional finite element analysis of human temporomandibular joint with and without disc displacement during jaw opening.

The aim of this study was to evaluate the differences of stress distribution in the temporomandibular joint (TMJ) disc during jaw opening between the subjects with and without internal derangement of TMJ (TMJ-ID). Three symptom-free volunteers and three symptomatic patients with anterior disc displacement were selected as normal and TMJ-ID subjects, respectively. For each subject, magnetic resonance images (MRI) were taken in the axial, sagittal and coronal directions. Using MRI taken, six three-dimensional finite element models of TMJ were developed. For each subject, the condylar movements during jaw opening were recorded and used as the loading condition for stress analysis. By comparing the calculated disc displacement to the measured one from MRI, the frictional coefficients were mu = 0.001 for the normal subjects, but mu = 0.01-0.001 for the TMJ-ID subjects. For the normal subjects, relatively high stresses were found at the anterior and lateral portions of the disc throughout jaw opening. In the connective tissues, the stress level was higher in the TMJ-ID than in the normal subjects. It is suggested that the disc displacement induces the change of stress distribution in the disc and the increase of frictional coefficients between articular surfaces, resulting in the secondary tissue damage.

[1]  G A Ateshian,et al.  A theoretical formulation for boundary friction in articular cartilage. , 1997, Journal of biomechanical engineering.

[2]  D W Nitzan,et al.  Intraarticular pressure in the functioning human temporomandibular joint and its alteration by uniform elevation of the occlusal plane. , 1994, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[3]  Hajime Tokiwa,et al.  Clinical examination for stomatognathic functions- by using the gnatho-hexagraph - , 1998 .

[4]  J Fisher,et al.  The influence of continuous sliding and subsequent surface wear on the friction of articular cartilage , 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[5]  M J Bronskill,et al.  Magnetic resonance imaging of the prostate. , 1985, Radiology.

[6]  J Chen,et al.  A finite element analysis of the human temporomandibular joint. , 1994, Journal of biomechanical engineering.

[7]  C H Gibbs,et al.  Temporomandibular joint forces measured at the condyle of Macaca arctoides. , 1990, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[8]  Kazuo Tanne,et al.  Influence of friction at articular surfaces of the temporomandibular joint on stresses in the articular disk: a theoretical approach with the finite element method. , 2003, The Angle orthodontist.

[9]  T. Yamaguchi,et al.  The effect of additive hyaluronic acid on animal joints with experimentally reduced lubricating ability. , 1994, Journal of biomedical materials research.

[10]  C. Helms,et al.  Arthrotomography of the temporomandibular joint. , 1980, AJR. American journal of roentgenology.

[11]  E. Tanaka,et al.  Stress analysis in the TMJ during jaw opening by use of a three-dimensional finite element model based on magnetic resonance images. , 2001, International journal of oral and maxillofacial surgery.

[12]  J Fisher,et al.  The Influence of Loading Time and Lubricant on the Friction of Articular Cartilage , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[13]  L. D. de Bont,et al.  The structure, biochemistry, and metabolism of osteoarthritic cartilage: a review of the literature. , 1995, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[14]  E. Tanaka,et al.  Biomechanical response of retrodiscal tissue in the temporomandibular joint under compression. , 2002, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[15]  T. Yamaguchi,et al.  Molecular weight independence of the effect of additive hyaluronic acid on the lubricating characteristics in synovial joints with experimental deterioration. , 1999, Clinical biomechanics.

[16]  J. W. Osborn.  The disc of the human temporomandibular joint: design, function and failure. , 1985 .

[17]  P. Westesson,et al.  Temporomandibular joint: correlation between single-contrast videoarthrography and postmortem morphology. , 1986, Radiology.

[18]  E. Tanaka,et al.  Stress distribution in the temporomandibular joint affected by anterior disc displacement: a three-dimensional analytic approach with the finite-element method. , 2000, Journal of oral rehabilitation.

[19]  P. Canham,et al.  The behaviour of collagen fibres in stress relaxation and stress distribution in the jaw-joint disc of rabbits. , 1996, Archives of oral biology.

[20]  J. H. Koolstra,et al.  Three-dimensional finite element analysis of the human temporomandibular joint disc. , 2000, Journal of biomechanics.

[21]  J. Schurz,et al.  Rheology of synovial fluid. , 1987, Biorheology.

[22]  D. Nitzan.  The process of lubrication impairment and its involvement in temporomandibular joint disc displacement: a theoretical concept. , 2001, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[23]  Charles McNeill,et al.  Science and practice of occlusion , 1997 .

[24]  L. Sundblad.  Chapter 29 – GLYCOSAMINOGLYCANS AND GLYCOPROTEINS IN SYNOVIAL FLUID , 1965 .

[25]  H. Gray.  Gray's Anatomy , 1858 .