Quantification of uncertainty modelling in stochastic analysis of FRP composites

[1]  J. Hurtado,et al.  Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers , 2006 .

[2]  George N Frantziskonis,et al.  Stochastic modeling of heterogeneous materials – A process for the analysis and evaluation of alternative formulations , 1998 .

[3]  Salvatore Torquato,et al.  Microstructure of two-phase random media.III: The n-point matrix probability functions for fully penetrable spheres , 1983 .

[4]  John E. Renaud,et al.  Uncertainty quantification using evidence theory in multidisciplinary design optimization , 2004, Reliab. Eng. Syst. Saf..

[5]  Zhenzhou Lu,et al.  Probabilistic strength analysis of bolted joints in laminated composites using point estimate method , 2009 .

[6]  H. Fukuda,et al.  Approximate upper and lower bounds for the strength of unidirectional composites , 1999 .

[7]  P. Soden,et al.  Recommendations for designers and researchers resulting from the world-wide failure exercise , 2004 .

[8]  Lars Sentler,et al.  Reliability of high performance fibre composites , 1997 .

[9]  Martin Ostoja-Starzewski,et al.  Random field models of heterogeneous materials , 1998 .

[10]  Chandra Shekhar Upadhyay,et al.  Probabilistic failure of laminated composite plates using the stochastic finite element method , 2007 .

[11]  Rodney S. Thomson,et al.  Review of methodologies for composite material modelling incorporating failure , 2008 .

[12]  Arun M. Gokhale,et al.  Digital image analysis and microstructure modeling tools for microstructure sensitive design of materials , 2004 .

[13]  Y. Benveniste,et al.  On transformation strains and uniform fields in multiphase elastic media , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[14]  S. C. Lin,et al.  Buckling failure analysis of random composite laminates subjected to random loads , 2000 .

[15]  Bibiana Luccioni,et al.  Constitutive Model for Fiber-Reinforced Composite Laminates , 2006 .

[16]  Richard M. Bennett,et al.  Three-parameter vs. two-parameter Weibull distribution for pultruded composite material properties , 2002 .

[17]  Bruce R. Ellingwood,et al.  Toward Load and Resistance Factor Design for Fiber-Reinforced Polymer Composite Structures , 2003 .

[18]  Michael R Wisnom,et al.  Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures , 2008 .

[19]  Kevin D Potter,et al.  Sources of variability in uncured aerospace grade unidirectional carbon fibre epoxy preimpregnate , 2007 .

[20]  D. Lomario,et al.  A comparison between Monte Carlo and FORMs in calculating the reliability of a composite structure , 2003 .

[21]  C. Guedes Soares,et al.  Reliability of components in composite materials , 1997 .

[22]  Christian Soize,et al.  Tensor-valued random fields for meso-scale stochastic model of anisotropic elastic microstructure and probabilistic analysis of representative volume element size , 2008 .

[23]  Christian Soize,et al.  Theoretical framework and experimental procedure for modelling mesoscopic volume fraction stochastic fluctuations in fiber reinforced composites , 2008 .

[24]  Marcin Kamiński,et al.  Generalized perturbation-based stochastic finite element method in elastostatics , 2007 .

[25]  S. Baxter,et al.  A framework for stochastic mechanics , 2006 .

[26]  Ahmed K. Noor,et al.  Uncertainty analysis of stiffened composite panels , 2001 .

[27]  R. Ganesan,et al.  Buckling of Composite Beam-columns with Stochastic Properties , 2005 .

[28]  M. Ostoja-Starzewski Material spatial randomness: From statistical to representative volume element☆ , 2006 .

[29]  Noboru Kikuchi,et al.  Digital image-based modeling applied to the homogenization analysis of composite materials , 1997 .

[30]  W. P. De Wilde,et al.  The use of Monte Carlo techniques in statistical finite element methods for the determination of the structural behaviour of composite materials structural components , 1995 .

[31]  Sankaran Mahadevan,et al.  Ultimate Strength Failure Probability Estimation of Composite Structures , 2000 .

[32]  M. Gurvich Strength/size effect for anisotropic brittle materials under a random stress state , 1999 .

[33]  Somnath Ghosh,et al.  Elastic-plastic analysis of arbitrary heterogeneous materials with the Voronoi Cell finite element method , 1995 .

[34]  Tai-Yan Kam,et al.  Probabilistic failure analysis of transversely loaded laminated composite plates using first-order second moment method , 2000 .

[35]  M. W. Long,et al.  Probabilistic Design Methodology for Composite Aircraft Structures. , 1999 .

[36]  M. Pindera,et al.  Micro-macromechanical analysis of heterogeneous materials: Macroscopically homogeneous vs periodic microstructures , 2007 .

[37]  Sergio Oller,et al.  Numerical simulation of fiber reinforced composite materials––two procedures , 2002 .

[38]  Michał Kleiber,et al.  Perturbation based stochastic finite element method for homogenization of two-phase elastic composites , 2000 .

[39]  Xinwei Wang,et al.  On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites , 2006 .

[40]  Mircea Grigoriu,et al.  Probability and Materials: from Nano- to Macro-Scale: A summary , 2006 .

[41]  Jean-Louis Chaboche,et al.  Towards a micromechanics based inelastic and damage modeling of composites , 2001 .

[42]  Dominique Jeulin,et al.  Mechanics of Random and Multiscale Microstructures , 2001, International Centre for Mechanical Sciences.

[43]  C. Navarro,et al.  Statistical analysis of the mechanical properties of composite materials , 2000 .

[44]  L. S. Sutherland,et al.  Review of probabilistic models of the strength of composite materials , 1997 .

[45]  Marc P. Mignolet,et al.  Random inelastic behavior of composite materials with local load sharing , 1995 .

[46]  S. Torquato,et al.  Generating microstructures with specified correlation functions , 2001 .

[47]  Damijan Markovic,et al.  On micro–macro interface conditions for micro scale based FEM for inelastic behavior of heterogeneous materials , 2004 .

[48]  Ahmed K. Noor,et al.  Uncertainty Analysis of Composite Structures , 2000 .

[49]  A. Gokhale,et al.  Representative volume element for non-uniform micro-structure , 2002 .

[50]  Martin Ostoja-Starzewski,et al.  Stochastic finite elements as a bridge between random material microstructure and global response , 1999 .

[51]  F. Richard,et al.  Reliability indicator for layered composites with strongly non-linear behaviour , 2009 .

[52]  W. Curtin,et al.  Strength and reliability of notched fiber-reinforced composites , 1997 .

[53]  Jorge E. Hurtado,et al.  A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element , 2006 .

[54]  Dinh Chi Pham,et al.  Progressive Failure Analysis of Composites , 2008 .

[55]  Habib J. Dagher,et al.  Probabilistic Finite Element Analysis of Modified ASTM D3039 Tension Test for Marine Grade Polymer Matrix Composites , 2008 .

[56]  Anoush Poursartip,et al.  Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts , 2002 .

[57]  D. G. Harlow,et al.  Statistical properties of hybrid composites: asymptotic distributions for strain , 1997 .

[58]  R. A. Shenoi,et al.  STRENGTH AND STIFFNESS OF FIBRE-REINFORCED PLASTIC PLATES. , 1996 .

[59]  C. Boyer,et al.  Design of a composite structure to achieve a specified reliability level , 1997 .

[60]  A. A. Gusev Representative volume element size for elastic composites: A numerical study , 1997 .

[61]  Somnath Ghosh,et al.  Tessellation-based computational methods for the characterization and analysis of heterogeneous microstructures , 1997 .

[62]  Marios K. Chryssanthopoulos,et al.  Probabilistic Models for Spatially Varying Mechanical Properties of In-Service GFRP Cladding Panels , 2009 .

[63]  Somnath Ghosh,et al.  Multiple scale analysis of heterogeneous elastic structures using homogenization theory and voronoi cell finite element method , 1995 .

[64]  J. Clarke Structural design of polymer composites : EUROCOMP design code and handbook , 1996 .

[65]  Rafael García,et al.  Quality control of CFRP by means of digital image processing and statistical point pattern analysis , 2007 .

[66]  Marcin Kami ski,et al.  Numerical homogenization ofN-component composites including stochastic interface defects , 2000 .

[67]  Michal Šejnoha,et al.  Qualitative analysis of fiber composite microstructure: Influence of boundary conditions , 2006 .

[68]  D. J. Lekou,et al.  On the stochastic nature of thermomechanical properties in glass reinforced polyester laminates , 2000 .

[69]  Michal Šejnoha,et al.  Numerical evaluation of effective elastic properties of graphite fiber tow impregnated by polymer matrix , 2001 .

[70]  A. Young,et al.  Application of the spectral stochastic finite element method for performance prediction of composite structures , 2007 .

[71]  Paolo Venini,et al.  Free vibrations of uncertain composite plates via stochastic Rayleigh-Ritz approach , 1997 .

[72]  R. Pyrz Quantitative description of the microstructure of composites. Part I: Morphology of unidirectional composite systems , 1994 .

[73]  Salvatore Torquato,et al.  Random Heterogeneous Media: Microstructure and Improved Bounds on Effective Properties , 1991 .

[74]  Rajamohan Ganesan,et al.  Free-vibration of Composite Beam-columns with Stochastic Material and Geometric Properties Subjected to Random Axial Loads , 2005 .

[75]  R. Bennett,et al.  Statistical Characterization of Fiber-Reinforced Polymer Composite Material Properties for Structural Design , 2006 .

[76]  W. Drugan,et al.  A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites , 1996 .

[77]  Chang-Sun Hong,et al.  Probabilistic deformation and strength prediction for a filament wound pressure vessel , 2003 .

[78]  N. J. Pagano,et al.  Statistically Equivalent Representative Volume Elements for Unidirectional Composite Microstructures: Part I - Without Damage , 2006 .

[79]  Yoshisada Murotsu,et al.  Reliability-based optimization of fibrous laminated composites , 1997 .

[80]  J. N. Reddy,et al.  Probabilistic nonlinear finite element analysis of composite structures , 1993 .

[81]  Torquato,et al.  Effective properties of two-phase disordered composite media: II. Evaluation of bounds on the conductivity and bulk modulus of dispersions of impenetrable spheres. , 1986, Physical review. B, Condensed matter.

[82]  J.-F. Maire,et al.  Improving the reliability of material databases using multiscale approaches , 2007, 0711.3901.

[83]  Sarah C. Baxter,et al.  Characterization of Random Composites Using Moving-Window Technique , 2000 .

[84]  R. Pyrz Correlation of Microstructure Variability and Local Stress Field in Two-Phase Materials , 1994 .

[85]  Zheng-Ming Huang,et al.  Micromechanical prediction of ultimate strength of transversely isotropic fibrous composites , 2001 .

[86]  Dimitrios G. Aggelis,et al.  Mechanical property distribution of CFRP filament wound composites , 1999 .

[87]  Somnath Ghosh,et al.  Quantitative characterization and modeling of composite microstructures by voronoi cells , 1997 .

[88]  C. Guedes Soares,et al.  Reliability assessment for ultimate longitudinal strength of ship hulls in composite materials , 2007 .

[89]  David W. Scott,et al.  SHORT-TERM BEHAVIOR AND DESIGN OF FIBER-REINFORCED POLYMERIC SLENDER MEMBERS UNDER AXIAL COMPRESSION , 1997 .

[90]  S. Nemat-Nasser,et al.  Micromechanics: Overall Properties of Heterogeneous Materials , 1993 .

[91]  Christos C. Chamis,et al.  A method for the probabilistic design assessment of composite structures , 1994 .

[92]  R. A. Shenoi,et al.  Reliability analysis of mid-plane symmetric laminated plates using direct simulation method , 1998 .

[93]  N. Kikuchi,et al.  Simulation of the multi-scale convergence in computational homogenization approaches , 2000 .

[94]  V. Karbhari,et al.  CALIBRATION OF RESISTANCE FACTORS FOR RELIABILITY BASED DESIGN OF EXTERNALLY-BONDED FRP COMPOSITES , 2008 .

[95]  H. Daniels The statistical theory of the strength of bundles of threads. I , 1945, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[96]  Forrest J. Masters,et al.  Non-Gaussian simulation of local material properties based on a moving-window technique , 2003 .

[97]  D. Jeulin,et al.  Determination of the size of the representative volume element for random composites: statistical and numerical approach , 2003 .

[98]  K. Goda A strength reliability model by Markov process of unidirectional composites with fibers placed in hexagonal arrays , 2003 .

[99]  G. Dvorak Transformation field analysis of inelastic composite materials , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[100]  S. Lin,et al.  Reliability predictions of laminated composite plates with random system parameters , 2000 .

[101]  P. M. Squet Local and Global Aspects in the Mathematical Theory of Plasticity , 1985 .

[102]  E. Sanchez-Palencia Non-Homogeneous Media and Vibration Theory , 1980 .

[103]  Alexander E. Bogdanovich,et al.  Stochastic theory of composite materials with random waviness of the reinforcements , 1998 .

[104]  W. Weibull A statistical theory of the strength of materials , 1939 .

[105]  F. Ellyin,et al.  Determining a representative volume element capturing the morphology of fibre reinforced polymer composites , 2007 .

[106]  B. Ripley The second-order analysis of stationary point processes , 1976, Journal of Applied Probability.

[107]  Dan M. Frangopol,et al.  Reliability of fiber-reinforced composite laminate plates , 2003 .

[108]  Sarah C. Baxter,et al.  Analysis of Heterogeneous Composites Based on Moving-Window Techniques , 2003 .

[109]  R. Hill Elastic properties of reinforced solids: some theoretical principles , 1963 .

[110]  S. Torquato,et al.  Random Heterogeneous Materials: Microstructure and Macroscopic Properties , 2005 .

[111]  Jon C. Helton,et al.  Mathematical representation of uncertainty , 2001 .

[112]  P. D. Soden,et al.  Predicting failure in composite laminates: the background to the exercise , 1998 .

[113]  Sia Nemat-Nasser,et al.  On two micromechanics theories for determining micro–macro relations in heterogeneous solids , 1999 .

[114]  J. Andersons,et al.  A family of weakest link models for fiber strength distribution , 2007 .

[115]  Galib H. Abumeri,et al.  Probabilistic dynamic buckling of composite shell structures , 2005 .

[116]  Michał Kleiber,et al.  Stochastic structural interface defects in fiber composites , 1996 .

[117]  Michael R Wisnom,et al.  The generation of geometrical deformations due to tool/part interaction in the manufacture of composite components , 2005 .

[118]  Jorge E. Hurtado,et al.  Random models versus periodic models for fibre reinforced composites , 2006 .

[119]  Mark R. Gurvich,et al.  Probabilistic analysis of multi-step failure process of a laminated composite in bending , 1995 .

[120]  Sarah C. Baxter,et al.  Simulation of local material properties based on moving-window GMC , 2001 .

[121]  Pol D. Spanos,et al.  A multiscale Monte Carlo finite element method for determining mechanical properties of polymer nanocomposites , 2008 .

[122]  Hidetoshi Nakayasu,et al.  A comparative study of failure criteria in probabilistic fields and stochastic failure envelopes of composite materials , 1997 .

[123]  Yongchang Pu,et al.  Reliability analysis of structures using neural network method , 2006 .

[124]  C. H. Rao,et al.  Reliability of Composite Laminates in Ship Hulls , 2005 .

[125]  S. Phoenix Modeling the statistical lifetime of glass fiber/polymer matrix composites in tension , 2000 .

[126]  Wen-Fang Wu,et al.  Random field formulation of composite laminates , 2000 .

[127]  R. A. Shenoi,et al.  Probabilistic strength analysis of rectangular FRP plates using Monte Carlo simulation , 2000 .

[128]  J. Maire,et al.  Composites structural modelling with uncertain data , 2009 .

[129]  Probabilistic Finite Element Analysis of ASTM D6641 Compression Test for Marine Grade Polymer Matrix Composites , 2009 .

[130]  Michael Shiao,et al.  Probabilistic Evaluation of Fuselage-Type Composite Structures , 1999 .

[131]  M. Elseifi,et al.  PROBABILISTIC ANALYSIS OF THICK COMPOSITE PLATES WITH MANUFACTURING AND MATERIAL UNCERTAINTIES , 2001 .

[132]  Andrei A. Gusev,et al.  Fiber packing and elastic properties of a transversely random unidirectional glass/epoxy composite , 2000 .

[133]  N. Kikuchi,et al.  A comparison of homogenization and standard mechanics analyses for periodic porous composites , 1992 .

[134]  Michael R Wisnom,et al.  Size effects in the testing of fibre-composite materials , 1999 .

[135]  D. J. Lekou,et al.  Mechanical property variability in FRP laminates and its effect on failure prediction , 2008 .

[136]  Marcin Kamiński,et al.  Wavelet-based homogenization of unidirectional multiscale composites , 2003 .

[137]  V. Pensée,et al.  Generalized self-consistent estimation of the apparent isotropic elastic moduli and minimum representative volume element size of heterogeneous media , 2007 .

[138]  Ala Tabiei,et al.  Statistical aspects of strength size effect of laminated composite materials , 1999 .