Industry case studies in the use of immersive virtual assembly

In this paper, we report on two engineering case studies that have been conducted as part of a Virtual Assembly Technology Consortium. The objectives of the case studies were to determine if immersive virtual assembly capabilities allow industry assembly situations to be modelled and studied realistically, and to demonstrate the downstream value of the virtual assembly capabilities in areas such as ergonomics, assembly installation, process planning, installation, and serviceability. What is of special significance is that instead of modelling simplified problems or perceived representative situations, the case studies were constructed from actual assembly floor projects and situations encountered at industry member sites and with considerable participation from industry engineers and manufacturing shop floor personnel. Based on the success of the case studies, the consortium members inferred that virtual assembly methods are poised to move out of the realm of special projects and test scenarios to deployment in the actual design and manufacturing cycle. However, in order to be truly accepted in industry, there are still issues to be addressed in terms of ease of use, portability of the applications, and preparation of the models for the evaluations. Thus, the case studies added a new dimension to the exploration and understanding of how this new technology could be of practical value in industry.

[1]  Judy M. Vance,et al.  Interactive virtual tools for manipulating NURBS surfaces in a virtual environment , 2002 .

[2]  Judy M. Vance,et al.  A DESKTOP NETWORKED HAPTIC VR INTERFACE FOR MECHANICAL ASSEMBLY , 2005 .

[3]  Uma Jayaram,et al.  Validation of Virtual Crane Behavior Through Comparison With a Real Crane , 2002 .

[4]  Yong Wang,et al.  VADE: A Virtual Assembly Design Environment , 1999, IEEE Computer Graphics and Applications.

[5]  Uma Jayaram,et al.  Introducing quantitative analysis methods into virtual environments for real-time and continuous ergonomic evaluations , 2006, Comput. Ind..

[6]  Uma Jayaram,et al.  Participatory ergonomics using VR integrated with analysis tools , 2004, Proceedings of the 2004 Winter Simulation Conference, 2004..

[7]  Judy M. Vance,et al.  Combining MSC/NASTRAN, sensitivity methods, and virtual reality to facilitate interactive design , 1997 .

[8]  Uma Jayaram,et al.  Embedding Haptics-Enabled Virtual Tools in CAD for Training Applications , 2006 .

[9]  Judy M. Vance,et al.  Assessment of VR Technology and its Applications to Engineering Problems , 2001, J. Comput. Inf. Sci. Eng..

[10]  H. Sun,et al.  Two-handed assembly with immersive task planning in virtual reality , 2005, Virtual Reality.

[11]  Judy M. Vance,et al.  SHARP: A System for Haptic Assembly and Realistic Prototyping , 2006 .

[12]  Uma Jayaram,et al.  Reorganizing CAD Assembly Models (as-Designed) for Manufacturing Simulations and Planning (as-Built) , 2004, J. Comput. Inf. Sci. Eng..

[13]  Yong Wang,et al.  A Virtual Assembly Design Environment , 1999, Proceedings IEEE Virtual Reality (Cat. No. 99CB36316).

[14]  Bert Bras,et al.  A Haptic Assembly and Disassembly Simulation Environment and Associated Computational Load Optimization Techniques , 2001, J. Comput. Inf. Sci. Eng..

[15]  Edward J. Haug,et al.  Virtual Prototyping for Mechanical System Concurrent Engineering , 1993 .

[16]  H. J. Bullinger,et al.  Virtual assembly planning , 2000 .

[17]  Albert C.K. Choi,et al.  Application of Virtual Assembly Tools for Improving Product Design , 2002 .

[18]  Uma Jayaram,et al.  Integration of Immersive Environment and RULA for Real-Time Study of Workplace Related Musculoskeletal Disorders in the Upper Limb , 2003 .

[19]  Yong Wang,et al.  Methods and Algorithms for Constraint-based Virtual Assembly , 2003, Virtual Reality.

[20]  Patrick Hartling,et al.  Open source virtual reality , 2002, Proceedings IEEE Virtual Reality 2002.

[21]  Judy M. Vance,et al.  Applying Virtual Reality Techniques to Sensitivity-Based Structural Shape Design , 1998 .

[22]  Wan Huagen,et al.  Virtual grasping for virtual assembly tasks , 2004, Third International Conference on Image and Graphics (ICIG'04).

[23]  John Simmons,et al.  Assembly planning in a virtual environment , 1997, Innovation in Technology Management. The Key to Global Leadership. PICMET '97.

[24]  Uma Jayaram,et al.  Case Studies Using Immersive Virtual Assembly in Industry , 2004 .

[25]  Abhishek Seth,et al.  , PA DETC 06 / CIE-99476 SHARP : A SYSTEM FOR HAPTIC ASSEMBLY & REALISTIC PROTOTYPING , 2006 .

[26]  Qiang Wu.  Colliding contact modeling in a virtual assembly design environment , 2003 .