Experimental investigation of pore clogging by microparticles: Evidence for a critical flux density of particle yielding arches and deposits

Abstract Prediction of pore fouling by microparticles is still challenging and remains a difficult step to optimize membrane and filtration processes. The scientific issue consists in determining the relevant operation parameters controlling the capture of particles and the clogging of the filter. In this study, we have developed for a dead-end and cross-flow filtration a poly-dimethylsiloxane (PDMS) device which allows direct observation of the clogging dynamics of microchannels (20 μm wide) by micrometric particles (5 μm diameter). The experiments highlight the formation of different 3D clogging patterns according to the filtration conditions (particle concentration, flowrate, particle flux density and physical–chemical conditions of suspension). Besides, we have determined under which specific conditions of filtration, the latex microparticles are captured and form arches, clusters or dendrites. For each type of structure, the temporal dynamics of the particle deposition are analyzed by means of the average thickness of deposit. The critical conditions for the formation of arches leading to deposit formation have been identified in term of a combination of operating conditions: the particle concentration and the particle velocity. A critical particle flux density yielding pore clogging is then observed and characterized. Studying these experimental results helps to identify pore clogging mechanisms: deposition, interception and bridging.

[1]  F. Civan,et al.  Alteration of permeability by drilling fluid invasion and flow reversal , 2007 .

[2]  Alkiviades C. Payatakes,et al.  Dendritic deposition of aerosols by convective Brownian diffusion for small, intermediate and high particle Knudsen numbers , 1980 .

[3]  D. Fletcher,et al.  Numerical simulation of colloidal dispersion filtration: description of critical flux and comparison with experimental results , 2006 .

[4]  R. Adrian,et al.  On flow-blocking particle structures in microtubes , 2005 .

[5]  Arrow,et al.  The Physics of Fluids , 1958, Nature.

[6]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[7]  M. Meireles,et al.  Colloidal surface interactions and membrane fouling: investigations at pore scale. , 2011, Advances in colloid and interface science.

[8]  H. S. Fogler,et al.  Plugging by hydrodynamic bridging during flow of stable colloidal particles within cylindrical pores , 1999, Journal of Fluid Mechanics.

[9]  D. Bourrier,et al.  Particle deposition onto a microsieve , 2009 .

[10]  Michael Curt Elwenspoek,et al.  Development and applications of very high flux microfiltration membranes , 1998 .

[11]  Howard A Stone,et al.  Mechanism for clogging of microchannels. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[12]  Pierre Aimar,et al.  Model for colloidal fouling of membranes , 1995 .

[13]  R. Field,et al.  Critical flux concept for microfiltration fouling , 1995 .

[14]  Menachem Elimelech,et al.  In situ monitoring techniques for concentration polarization and fouling phenomena in membrane filtration. , 2003, Advances in colloid and interface science.

[15]  Robert H. Davis,et al.  The behavior of suspensions and macromolecular solutions in crossflow microfiltration , 1994 .

[16]  B. Stoeber,et al.  Deposition of particles from polydisperse suspensions in microfluidic systems , 2010 .