LNA automatic synthesis and characterization for accurate RF system-level simulation

In this paper, we propose an automatic design procedure for the synthesis of a cascode LNA with inductive source degeneration. The proposed method is based on the precise characterization of noise figure, input impedance and gain. The design procedure is implemented in a C++ environment using a BSIM3v3-based tool for transistor sizing and a symbolic computation tool for circuit characterization. SystemC AMS can then be used to perform a system level simulation of a complete RF receiver using precise model of the LNA. Considering the complete equivalent model for the transistors and the inductors, two LNAs operating at 2.4 GHz and 935 MHz are synthesized and characterized for a 130 nm CMOS process. The generated accurate model is then used in a high-level simulation of a complete QPSK-based RF receiver to study the effect of the LNA noise figure on the Bit Error Rate of the receiver.

[1]  Arthur Nieuwoudt,et al.  Narrow-band low-noise amplifier synthesis for high-performance system-on-chip design , 2007, Microelectron. J..

[2]  Jenn-Tzer Yang,et al.  A CMOS radio frequency receiver for Bluetooth applications , 2009, 2009 1st Asia Symposium on Quality Electronic Design.

[3]  Y. Tsividis.  Operation and modeling of the MOS transistor , 1987 .

[4]  Jarek Lucek,et al.  Designing an LNA for a CDMA front end , 1999 .

[5]  Dariusz Zbigniew Pienkowski,et al.  CMOS Low-Noise Amplifier Design for Reconfigurable Mobile Terminals , 2005 .

[6]  K. Mayaram,et al.  A packaged 2.4 GHz LNA in a 0.15µm CMOS process with 2kV HBM ESD protection , 2002, Proceedings of the 28th European Solid-State Circuits Conference.

[7]  Behzad Razavi,et al.  RF Microelectronics , 1997 .

[8]  Sina Balkir,et al.  Synthesis of RF CMOS Low Noise Amplifiers , 2008, 2008 IEEE International Symposium on Circuits and Systems.

[9]  Domine M. W. Leenaerts,et al.  Circuit Design for RF Transceivers , 2001 .

[10]  Yannis Tsividis,et al.  Active LC filters on silicon , 2000 .

[11]  Hassan Aboushady,et al.  Automatic model refinement of GmC integrators for high-level simulation of continuous-time Sigma-Delta modulators , 2009, 2009 IEEE International Symposium on Circuits and Systems.

[12]  François Pêcheux,et al.  Modeling and Refining Heterogeneous Systems With SystemC-AMS: Application to WSN , 2008, 2008 Design, Automation and Test in Europe.

[13]  Jerzy J. Dabrowski,et al.  LNA design for on-chip RF test , 2006, 2006 IEEE International Symposium on Circuits and Systems.

[14]  Wei Cheng,et al.  A multi-step P-cell for LNA design automation , 2008, 2008 IEEE International Symposium on Circuits and Systems.

[15]  Ramy Iskander,et al.  Automatic DC operating point computation and design plan generation for analog IPs , 2008 .

[16]  Arthur Nieuwoudt,et al.  Numerical Design Optimization Methodology for Wideband and Multi-Band Inductively Degenerated Cascode CMOS Low Noise Amplifiers , 2009, IEEE Transactions on Circuits and Systems I: Regular Papers.