Essential work of fracture of low-filled poly(methyl methacrylate)/starch composites

In this study, poly(methyl methacrylate) (PMMA)/starch composites were prepared by a simple solvent casting method. The morphologies of the PMMA/starch composites were studied by scanning electron microscopy. The intermolecular interaction between PMMA and starch was investigated with Fourier transform infrared spectroscopy. The thermal properties of the PMMA/starch composites were compared with those of the pure PMMA sample. Thermogravimetric analysis showed that the thermal stability increased as the starch content increased in the composites. The biodegradability of the PMMA/starch composites was studied with a soil burial test. The degradability was measured in terms of mechanical strength, which increased as the starch content increased. The essential work of fracture (EWF) of the PMMA/starch composite films was investigated by the application of EWF theory under in-plane (mode I) conditions, and we found that the toughness, in terms of the EWF of composites, increased compared to that of pure PMMA. The fracture of the composites was also evaluated by ANSYS software, and the results were compared to the experimental output. The increased toughness of these PMMA/starch composites may enable their application in the automobile and packaging industries. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

[1]  David C. Miller,et al.  Durability of Fresnel lenses: A review specific to the concentrating photovoltaic application , 2011 .

[2]  M. Nopharatana,et al.  Agglomeration mechanisms of cassava starch during pneumatic conveying drying , 2011 .

[3]  A. Pegoretti,et al.  On the essential work of fracture of linear low-density-polyethylene. I. Precision of the testing method , 2009 .

[4]  A. B. Martínez,et al.  The Essential Work of Fracture (EWF) method – Analyzing the Post-Yielding Fracture Mechanics of polymers , 2009 .

[5]  Depeng Su,et al.  The high-temperature resistant mechanism of α-starch composite binder for foundry , 2009 .

[6]  Masahito Ban,et al.  Chemical resistance of DLC thin film deposited PMMA substrates , 2009 .

[7]  M. Maspoch,et al.  Influence of femtolaser notch sharpening technique in the determination of essential work of fracture (EWF) parameters , 2009 .

[8]  J. Martínez‐Pastor,et al.  Development of self-assembled bacterial cellulose–starch nanocomposites , 2009 .

[9]  H. Kaczmarek,et al.  Biodegradation of plasticized poly(vinyl chloride) containing cellulose , 2007 .

[10]  R. Li,et al.  On the tearing fracture of polycarbonate films , 2007 .

[11]  M. Ton-That,et al.  Essential work of fracture and failure mechanisms of polypropylene–clay nanocomposites , 2006 .

[12]  P. Sahoo,et al.  Synthesis and biodegradability of starch-g-ethyl methacrylate/sodium acrylate/sodium silicate superabsorbing composite , 2006 .

[13]  J. Karger‐Kocsis,et al.  In-plane and Out-of-plane Fracture Toughness of Physically Aged Polyesters as Assessed by the Essential Work of Fracture (EWF) Method , 2005 .

[14]  J. Karger‐Kocsis,et al.  Tearing resistance of some co-polyester sheets , 2004 .

[15]  Y. Mai,et al.  On tearing of ductile polymer films using the essential work of fracture (EWF) method , 2003 .

[16]  C. Aksel,et al.  Work of fracture and fracture surface energy of magnesia-spinel composites , 2003 .

[17]  I. M. Thakore,et al.  Compatibility and biodegradability of blendsof starch cinnamate with various polymers , 2003 .

[18]  Rui L Reis,et al.  New partially degradable and bioactive acrylic bone cements based on starch blends and ceramic fillers. , 2002, Biomaterials.

[19]  Y. Mai,et al.  The essential fracture work concept for toughness measurement of ductile polymers , 1996 .

[20]  J. Karger‐Kocsis.  For what kind of polymer is the toughness assessment by the essential work concept straightforward? , 1996 .

[21]  Congming Xiao,et al.  Starch-based completely biodegradable polymer materials , 2009 .

[22]  B. Lauke,et al.  Essential work of interfacial fracture: a method to characterise adhesion at polymer–polymer interfaces , 2001 .

[23]  M. Ike,et al.  Biodegradation of a polyvinyl alcohol-starch blend plastic film , 1999 .

[24]  P. Kostyniak,et al.  Degradation of starch modified polyethylene bags in a compost field study , 1993 .