Electromagnetic Energy Conversion Efficiency Enhancement of Switched Reluctance Motors With Zero-Voltage Loop Current Commutation

Zero-voltage loop (ZVL) commutation in switched reluctance (SR) motor operation can result in a significant improvement of their performance by lowering the flux-linkage peaks and harmonic magnitudes of the magnetic flux densities within the core of the SR motor. The efficiency enhancement provided by ZVL commutation, especially in high-speed SR motoring has not been thoroughly investigated to-date. This paper investigates the energy conversion efficiency of SR motors with ZVL current commutation. The lowering of core losses is investigated with finite element modeling of a 250 kW 12/8 SR motor. An enhancement of efficiency in the ranges of 0--3% and 0--5% is computed considering operation below base-speed and above base-speed respectively. The effect of core material on the ZVL commutation performance is also investigated for the 250 kW 12/8 SR motor. The increase of efficiency with ZVL is further validated with experimental results on a 300 W 6/4 SR motor which achieves an enhancement in the range of 2-6%.

[1]  Chi-Yao Wu,et al.  Acoustic noise cancellation techniques for switched reluctance drives , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[2]  A. V. Radun,et al.  Two channel switched reluctance starter/generator results , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[3]  Mehdi Moallem,et al.  An improved magnetic equivalent circuit method for predicting the characteristics of highly saturated electromagnetic devices , 1998 .

[4]  Mike Barnes,et al.  Power electronic converters for switched reluctance drives , 1998 .

[5]  J. M. Stephenson,et al.  Single-phase switched reluctance motor design , 2000 .

[6]  J. Reinert,et al.  Optimizing performance in switched-reluctance drives , 2000 .

[7]  T. Fukao,et al.  The operation analysis and efficiency improvement of switched reluctance motors with high silicon steel , 2002, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579).

[8]  R.B. Inderka,et al.  Eddy currents in medium power switched reluctance machines , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[9]  Barrie Mecrow,et al.  Preliminary performance evaluation of switched reluctance motors with segmental rotors , 2004 .

[10]  Z.Q. Zhu,et al.  Effectiveness of active noise and vibration cancellation for switched reluctance machines operating under alternative control strategies , 2005, IEEE Transactions on Energy Conversion.

[11]  Babak Fahimi,et al.  Bipolar Switched Reluctance Machines: A Novel Solution for Automotive Applications , 2005, IEEE Transactions on Vehicular Technology.

[12]  G. Jewell,et al.  Prediction and measurement of core losses in a high-speed switched-reluctance Machine , 2005, IEEE Transactions on Magnetics.

[13]  P. Pillay,et al.  Lamination core losses in motors with nonsinusoidal excitation with particular reference to PWM and SRM excitation waveforms , 2005, IEEE Transactions on Energy Conversion.

[14]  C. Mademlis,et al.  Maximum efficiency in single-pulse controlled switched reluctance motor drives , 2005, IEEE Transactions on Energy Conversion.

[15]  H. Goto,et al.  A novel switched reluctance motor with wound-cores put on stator and rotor poles , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[16]  Yilmaz Sozer,et al.  Optimal turn-off angle control in the face of automatic turn-on angle control for switched-reluctance motors , 2007 .

[17]  A. Chiba,et al.  Basic characteristics of 150,000r/min switched reluctance motor drive , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[18]  K. Tungpimolrut,et al.  Efficiency Improvements of Switched Reluctance Motors With High-Quality Iron Steel and Enhanced Conductor Slot Fill , 2009, IEEE Transactions on Energy Conversion.

[19]  Osamu Ichinokura,et al.  Optimization of a Switched Reluctance Motor Made of Permendur , 2010, IEEE Transactions on Magnetics.

[20]  M Moallem,et al.  Double-Stator Switched Reluctance Machines (DSSRM): Fundamentals and Magnetic Force Analysis , 2010, IEEE Transactions on Energy Conversion.

[21]  O. Ichinokura,et al.  Experimental verification of performance of a switched reluctance motor made of permendur , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[22]  Mike Barnes,et al.  Modelling and control of variable frequency multiphase multi-machine AC-DC power conversion systems , 2010 .

[23]  Mike Barnes,et al.  Model based optimization and fault tolerant control of permanent magnet machines with harmonic injection pulse width modulation , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[24]  Mike Barnes,et al.  Excitation control and voltage regulation of switched reluctance generators above base speed operation , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[25]  Mike Barnes,et al.  Direct drive permanent magnet generator fed AC-DC active rectification and control for more-electric aircraft engines , 2011 .