Degradation of Rhodamine B, a waste water dye effluent was studied under the influence of ultrasound. In the present study, optimization of this degradation was carried out with power parameters, namely, power density (W/ml) and power intensity (W/cm2) using different ultrasonic equipments. From the studies, it has been observed that the degradation does not increase indefinitely with an increase in the power parameters, but instead, it reaches an optimum value and then decreases with a further increase in the power parameters. Also, these optima were not the same in all the ultrasonic equipments in which these studies were carried out. Difference in the type of acoustic field generated may be responsible for the different power optima observed with different ultrasonic equipments. The comparative study of the degradation of Rhodamine B using various ultrasonic equipments establishes a relationship between the area-specific parameter (intensity) and the volume-specific parameter (density) of reactivity.
[1]
A. Henglein,et al.
Chemical action of pulsed ultrasound: observation of an unprecedented intensity effect.
,
1990
.
[2]
J. Levec,et al.
Oxidation of an Azo Dye in Subcritical Aqueous Solutions
,
1997
.
[3]
G. Klinzing,et al.
Effect of cavitation on reacting systems
,
1974
.
[4]
P. Gogate,et al.
Engineering design method for cavitational reactors: I. Sonochemical reactors
,
2000
.
[5]
I. Hua,et al.
Sonochemical degradation of p-nitrophenol in a parallel-plate near-field acoustical processor.
,
1995,
Environmental science & technology.
[6]
M. Entezari,et al.
Effect of frequency on sonochemical reactions II. Temperature and intensity effects
,
1996
.
[7]
H. W. Cooper,et al.
Chemical Effect of Ultrasonic Waves: Oxidation of Potassium Iodide Solution by Carbon Tetrachloride
,
1950
.