Thermoelectric properties of BiSbTe-type alloys prepared by chill-casting and cryo-milling

[1]  K. Chattopadhyay,et al.  Mechanical and Thermoelectric Properties of Eutectic Composite (Bi, Sb)2Te3/Te Thermoelectric Material , 2020, Transactions of the Indian Institute of Metals.

[2]  S. K. Srivastava,et al.  Tuning of the Thermoelectric Properties of Bi2Te3 Nanorods Using Helium Ion Irradiation , 2018, ACS omega.

[3]  K. Martirosyan,et al.  Transition of p- to n-Type Conductivity in Mechanically Activated Bismuth Telluride , 2018, Journal of Electronic Materials.

[4]  V. Shelke,et al.  Effect of ball milling time on thermoelectric properties of bismuth telluride nanomaterials , 2018 .

[5]  Soon-Jik Hong,et al.  Effects of Ni and carbon-coated Ni addition on the thermoelectric properties of 25Bi2Te3+75Sb2Te3 base composites , 2017 .

[6]  Soon-Jik Hong,et al.  Enhanced Thermoelectric Properties of p-type Bi0.5Sb1.5Te3 Thermoelectric Materials by Mechanical Alloying and Spark Plasma Sintering , 2016, Journal of Electronic Materials.

[7]  N. Ravishankar,et al.  Effect of processing route on the bipolar contribution to the thermoelectric properties of n-type eutectic Bi22.5Sb7.5Te70 alloy , 2016 .

[8]  N. Ravishankar,et al.  Microstructure evolution and thermoelectric properties of Te-poor and Te-rich (Bi,Sb)2Te3 prepared via solidification , 2016, Journal of Materials Science.

[9]  Qian Cao,et al.  Mechanically enhanced p- and n-type Bi2Te3-based thermoelectric materials reprocessed from commercial ingots by ball milling and spark plasma sintering , 2015 .

[10]  S. Altın,et al.  Enhanced thermoelectric properties induced by chemical pressure in Ca3Co4O9 , 2014 .

[11]  S. Altın,et al.  Thermal conductivity and magnetic properties of the B substituted Ca3Co4O9 , 2014 .

[12]  G. Lu,et al.  Effects of mechanical alloying process and sintering methods on the microstructure and thermoelectric properties of bulk Bi0.5Sb1.5Te3 alloy , 2013 .

[13]  Bing Sun,et al.  Thermoelectric transport properties and crystal growth of BiSbTe3 bulk materials produced by a unique high-pressure synthesis , 2013 .

[14]  M. Oh,et al.  Effect of ball milling time on the thermoelectric properties of p-type (Bi,Sb)2Te3 , 2013 .

[15]  Shekhar D. Bhame,et al.  Enhanced thermoelectric performance in spark plasma textured bulk n-type BiTe2.7Se0.3 and p-type Bi0.5Sb1.5Te3 , 2013, 1305.2280.

[16]  K. Chattopadhyay,et al.  Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures , 2013, Metallurgical and Materials Transactions A.

[17]  Lei Yang,et al.  Nanostructured thermoelectric materials: current research and future challenge , 2012 .

[18]  L. Bulat,et al.  Influence of hole-and phonon-nanoparticle scattering on the transport coefficients in BixSb1-xTe3 bulk nanostructures , 2012 .

[19]  C. Chen,et al.  Effects of SiC Nanodispersion on the Thermoelectric Properties of p-Type and n-Type Bi2Te3-Based Alloys , 2011 .

[20]  C. Chen,et al.  Enhanced Thermoelectric Properties Obtained by Compositional Optimization in p-Type BixSb2−xTe3 Fabricated by Mechanical Alloying and Spark Plasma Sintering , 2011 .

[21]  A. Mondal,et al.  Combined Cryo and Room-Temperature Ball Milling to Produce Ultrafine Halide Crystallites , 2011 .

[22]  L. Bulat,et al.  Energy filtration of charge carriers in a nanostructured material based on bismuth telluride , 2011 .

[23]  C. Uher,et al.  Doping and Defect Structure of Tetradymite-Type Crystals , 2010 .

[24]  M. Jeng,et al.  Thermoelectric transport properties of bismuth telluride bulk materials fabricated by ball milling and spark plasma sintering , 2010 .

[25]  M. Kovalenko,et al.  Semiconductor nanocrystals functionalized with antimony telluride zintl ions for nanostructured thermoelectrics. , 2010, Journal of the American Chemical Society.

[26]  Vivek Goyal,et al.  Exfoliation and characterization of bismuth telluride atomic quintuples and quasi-two-dimensional crystals. , 2010, Nano letters.

[27]  G. J. Snyder,et al.  Interfaces in bulk thermoelectric materials: A review for Current Opinion in Colloid and Interface Science , 2009 .

[28]  J. Schoenung,et al.  Cryomilled nanostructured materials: Processing and properties , 2008 .

[29]  M. Dresselhaus,et al.  High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys , 2008, Science.

[30]  Jingfeng Li,et al.  Effects of process parameters on electrical properties of n-type Bi2Te3 prepared by mechanical alloying and spark plasma sintering , 2007 .

[31]  H. Goldsmid,et al.  Estimation of the thermal band gap of a semiconductor from seebeck measurements , 1999 .

[32]  J. Navrátil,et al.  Thermoelectric properties of p-type antimony bismuth telluride alloys prepared by cold pressing , 1996 .

[33]  Mildred S. Dresselhaus,et al.  Effect of quantum-well structures on the thermoelectric figure of merit. , 1993, Physical review. B, Condensed matter.

[34]  K. Grabowski,et al.  Influence of Growth Conditions and Tellurium Phase on the Thermoelectric Properties of Bismuth Telluride‐Type Materials , 1968 .

[35]  G. R. Miller,et al.  Evidence for the existence of antistructure defects in bismuth telluride by density measurements , 1964 .

[36]  W. Tiller,et al.  Effects of Heavy Deformation and Annealing on the Electrical Properties of Bi2Te3 , 1962 .

[37]  W. Tiller,et al.  Effect of Freezing Conditions on the Thermoelectric Properties of BiSbTe3 Crystals , 1961 .

[38]  E. Lavernia,et al.  Synthesis and mechanical behavior of nanostructured materials via cryomilling , 2006 .