Integrating nanodevice design, fabrication, and analysis into the mechanical engineering curriculum

Santosh Devasia received the B.Tech. (Hons) from the Indian Institute of Technology, Kharagpur, India, in 1988, and the M.S. and Ph.D. degrees in Mechanical Engineering from the University of California at Santa Barbara in 1990 and 1993 respectively. He is a Professor in the Mechanical Engineering Department at the University of Washington, Seattle where he joined in 2000. From 1994 to 2000, he taught in the Mechanical Engineering Department at the University of Utah, Salt Lake City. He has served as the Associate Editor for the ASME Journal of Dynamic Systems, Measurement and Control and the IEEE Transactions on Control Systems Technology. His current research interests include inversion-based control theory and applications such as high-precision positioning systems for Atomic Force Microscopes and Scanning Tunneling Microscopes used in nanotechnology, biomedical applications such as the imaging of human cells to investigate cell locomotion, and control of distributed systems such as Air Traffic Management.

[1]  C. Newcomb,et al.  Improving the linearity of piezoelectric ceramic actuators , 1982 .

[2]  Woon-Hong Yeo,et al.  Size-specific concentration of DNA to a nanostructured tip using dielectrophoresis and capillary action. , 2009, The journal of physical chemistry. B.

[3]  Jae Hyun Chung,et al.  Nanoscale gap fabrication and integration of carbon nanotubes by micromachining , 2002 .

[4]  Horacio Dante Espinosa,et al.  Experimental Techniques for the Mechanical Characterization of One-Dimensional Nanostructures , 2007 .

[5]  Christopher S. Chen,et al.  Microfabricated silicone elastomeric post arrays for measuring traction forces of adherent cells. , 2007, Methods in cell biology.

[6]  D. Croft,et al.  Creep, Hysteresis, and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application , 2001 .

[7]  Carolyn R. Fallahi,et al.  Creating Significant Learning Experiences Across Disciplines , 2008 .

[8]  N. Shimizu,et al.  An ultrahigh vacuum scanning tunneling microscope with a new inchworm mechanism , 1990 .

[9]  Andrew J. Fleming,et al.  Evaluation of charge drives for scanning probe microscope positioning stages , 2008, ACC.

[10]  D. Dikin,et al.  Realization of nanoscale resolution with a micromachined thermally actuated testing stage , 2004 .

[12]  A. Harris,et al.  Silicone rubber substrata: a new wrinkle in the study of cell locomotion. , 1980, Science.

[13]  Superimposed AC- and DC electric field guided deposition of a single DNA molecule along a microfabricated gap , 2003, 2003 Third IEEE Conference on Nanotechnology, 2003. IEEE-NANO 2003..

[14]  Weisong Wang,et al.  Precision in-package positioning with a thermal inchworm , 2008 .

[15]  R. Sureshkumar,et al.  Irreversible nanogel formation in surfactant solutions by microporous flow. , 2010, Nature materials.

[16]  Kyong-Hoon Lee,et al.  Toward large-scale integration of carbon nanotubes. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[17]  K.K. Leang,et al.  Published online in Wiley InterScience (www.interscience.wiley.com) DOI: 10.1002/asjc.090 HIGH-SPEED SERIAL-KINEMATIC SPM SCANNER: DESIGN AND DRIVE CONSIDERATIONS , 2022 .

[18]  Cheng Ling Chang,et al.  Manipulation of nanoparticles and biomolecules by electric field and surface tension , 2008 .

[19]  Woon-Hong Yeo,et al.  Hybrid nanofibril assembly using an alternating current electric field and capillary action. , 2009, Journal of nanoscience and nanotechnology.

[20]  Horacio D Espinosa,et al.  An electromechanical material testing system for in situ electron microscopy and applications. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[21]  Nathan J. Sniadecki,et al.  Geometric Considerations of Micro‐ to Nanoscale Elastomeric Post Arrays to Study Cellular Traction Forces , 2007 .

[22]  George C. Schatz,et al.  Multi-walled carbon nanotubes experiencing electrical breakdown as gas sensors , 2004 .

[24]  Aristides A. G. Requicha,et al.  Compensation of Scanner Creep and Hysteresis for AFM Nanomanipulation , 2008, IEEE Transactions on Automation Science and Engineering.

[25]  Santosh Devasia,et al.  A Survey of Control Issues in Nanopositioning , 2007, IEEE Transactions on Control Systems Technology.

[26]  Sami Alom Ruiz,et al.  Shear force at the cell-matrix interface: enhanced analysis for microfabricated post array detectors. , 2005, Mechanics & chemistry of biosystems : MCB.

[27]  K. Jacobson,et al.  Imaging the traction stresses exerted by locomoting cells with the elastic substratum method. , 1996, Biophysical journal.

[28]  R. F. Willis,et al.  Inchworm controller for fine approach in a scanning tunneling microscope , 1991 .

[29]  Dayong Gao,et al.  Platelet retraction force measurements using flexible post force sensors. , 2010, Lab on a chip.

[30]  Santosh Devasia,et al.  Hysteresis, Creep, and Vibration Compensation for Piezoactuators: Feedback and Feedforward Control 1 , 2002 .

[31]  B. A. Wallman,et al.  Nanolithography Requirements — An Equipment Manufacturers View , 1994 .

[32]  Yuichi Okazaki.  A Micro Positioning Tool Post using a Piezoelectric Actuator for Diamond Turning Machines , 1988 .

[33]  Ann L. Brown,et al.  How people learn: Brain, mind, experience, and school. , 1999 .

[34]  Karl Johan Åström,et al.  Design and Modeling of a High-Speed AFM-Scanner , 2007, IEEE Transactions on Control Systems Technology.

[35]  Microfabricated post-array-detectors (mPADs): an approach to isolate mechanical forces. , 2007, Journal of visualized experiments : JoVE.

[36]  Xiaobo Tan,et al.  Modeling and control of hysteresis , 2009 .

[37]  M. Saif,et al.  Deformation mechanisms in free-standing nanoscale thin films: a quantitative in situ transmission electron microscope study. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[38]  G. Cao,et al.  Nanoporous Scaffold with Immobilized Enzymes during Flow‐Induced Gelation for Sensitive H2O2 Biosensing , 2010, Advanced materials.

[39]  Christopher S. Chen,et al.  Cells lying on a bed of microneedles: An approach to isolate mechanical force , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[40]  Liu,et al.  Shear-Induced Gelation and Fracture in Micellar Solutions. , 1996, Physical review letters.

[41]  Christopher S. Chen,et al.  Magnetic microposts for mechanical stimulation of biological cells: fabrication, characterization, and analysis. , 2008, The Review of scientific instruments.

[42]  R. Ruoff,et al.  Fabrication of nanopores in a 100-nm thick Si3N4 membrane. , 2006, Journal of nanoscience and nanotechnology.

[43]  A. Fleming,et al.  A grounded-load charge amplifier for reducing hysteresis in piezoelectric tube scanners , 2005 .

[44]  D. Krathwohl.  A Taxonomy for Learning, Teaching and Assessing: , 2008 .

[45]  Qingze Zou,et al.  A review of feedforward control approaches in nanopositioning for high-speed spm , 2009 .

[46]  Rodney S. Ruoff,et al.  Controlled deposition of nanotubes on opposing electrodes , 2005 .

[47]  Christopher S. Chen,et al.  Magnetic microposts as an approach to apply forces to living cells , 2007, Proceedings of the National Academy of Sciences.

[48]  Joseph Wang,et al.  Metal nanoparticle-based electrochemical stripping potentiometric detection of DNA hybridization. , 2001, Analytical chemistry.