Micromechanical modeling of fatigue strength of unidirectional fibrous composites

Abstract This paper deals with modeling of fatigue strength of a unidirectional fibrous composite in terms of the fatigue properties of its constituent fiber and matrix materials and the fiber volume fraction only. When the composite is subjected to any kind of fatigue load, the resulting internal stresses in the constituents are determined through a new and simple micromechanics model, the bridging model [1] . A fatigue failure criterion similar to the maximum normal stress criterion has been established to detect failure of a constituent material. The composite fatigue strength is assumed when any constituent fails. The fatigue strengths of the constituents can be obtained through individual failure tests on the constituent materials, or can be retrieved using composite fatigue data in two different directions. In the paper, various off-axis S–N relationships of unidirectional graphite/epoxy and glass/epoxy composites have been estimated. The predicted results are in good agreement with available experimental data.

[1]  R. J. Arsenault,et al.  Metal matrix composites : mechanisms and properties , 1991 .

[2]  Z. Huang.  Tensile strength of fibrous composites at elevated temperature , 2000 .

[3]  Ramesh Talreja,et al.  Fatigue of composite materials , 1987 .

[4]  A. Tay,et al.  A Micromechanical Approach to the Tensile Strength of a Knitted Fabric Composite , 1999 .

[5]  Z. Gao,et al.  Numerical modeling of damage, property degradation and life prediction in fatigue of composite laminates , 1996 .

[6]  Larry Lessard,et al.  Statistical model for multiaxial fatigue behavior of unidirectional plies , 1999 .

[7]  Zheng-Ming Huang,et al.  The mechanical properties of composites reinforced with woven and braided fabrics , 2000 .

[8]  G. Sendeckyj,et al.  Life Prediction for Resin-Matrix Composite Materials , 1991 .

[9]  Zheng-ming Huang.  Modeling Strength of Multidirectional Laminates under Thermo-Mechanical Loads , 2001 .

[10]  John W. Gillespie,et al.  Delaware composites design encyclopedia , 1989 .

[11]  C. Chamis.  Mechanics of Composite Materials: Past, Present and Future , 1989 .

[12]  M. J. Salkind,et al.  Fatigue of Composites , 1972 .

[13]  Anastasios P. Vassilopoulos,et al.  Fatigue of composite laminates under off-axis loading , 1999 .

[14]  Jonathan Awerbuch,et al.  Off-Axis Fatigue of Graphite/Epoxy Composite , 1981 .

[15]  Zheng-ming Huang.  Micromechanical strength formulae of unidirectional composites , 1999 .

[16]  Z. Hashin,et al.  A Fatigue Failure Criterion for Fiber Reinforced Materials , 1973 .

[17]  S. White,et al.  Stress analysis of fiber-reinforced composite materials , 1997 .

[18]  Jun Chen,et al.  Micromechanical characterization of nonlinear behavior of advanced polymer matrix composites , 1996 .