Simple model for predicting the vibration transmission of a squat masonry tower by base forced vibrations
暂无分享,去创建一个
[1] S. Ivorra,et al. OMA dynamic identification of a masonry chimney with severe cracking condition , 2015 .
[2] Gianni Bartoli,et al. In situ static and dynamic investigations on the “Torre Grossa” masonry tower , 2013 .
[3] Dora Foti,et al. Non-Destructive Techniques and Monitoring for the Evolutive Damage Detection of an Ancient Masonry Structure , 2014 .
[4] M. De Angelis,et al. Vibration analysis of the civic tower in Rieti , 2017 .
[5] Antonio Borri,et al. Retrofit and monitoring of an historical building using “Smart” CFRP with embedded fibre optic Brillouin sensors , 2005 .
[6] M. Dolšek,et al. The importance of ambient and forced vibration measurements for the results of seismic performance assessment of buildings obtained by using a simplified non-linear procedure: case study of an old masonry building , 2013, Bulletin of Earthquake Engineering.
[7] Piotr Omenzetter,et al. Operational modal analysis of an eleven-span concrete bridge subjected to weak ambient excitations , 2017 .
[8] Francesco Fabbrocino,et al. Loading noise effects on the system identification of composite structures by dynamic tests with vibrodyne , 2017 .
[9] Carmelo Gentile,et al. Ambient vibration testing of historic masonry towers for structural identification and damage assessment , 2007 .
[10] Alessandro Cabboi,et al. Structural Identification of a Masonry Tower Based on Operational Modal Analysis , 2015 .
[11] Nicola Ivan Giannoccaro,et al. Optimal model through identified frequencies of a masonry building structure with wooden floors , 2014 .
[12] Kristof Maes,et al. Uncertainty quantification of modal characteristics identified from frequency-domain stochastic subspace identification , 2017 .
[13] S. Ivorra,et al. Creep behavior of a building stone from the South of Italy , 2016 .
[14] Salvador Ivorra,et al. IDENTIFICATION OF THE MODAL PROPERTIES OF AN HISTORIC MASONRY CLOCK TOWER , 2014 .
[15] Jonathan P. Stewart,et al. Forced vibration testing of buildings using the linear shaker seismic simulation (LSSS) testing method , 2004 .
[16] Salvador Ivorra,et al. Structural identification and numerical models for slender historical structures , 2015 .
[17] Nicola Ivan Giannoccaro,et al. Ambient vibration testing, dynamic identification and model updating of a historic tower , 2012 .
[18] Salvador Ivorra,et al. Dynamic investigations on a masonry bell tower , 2006 .
[19] Alessandro De Stefano,et al. Comparative study of vibration‐based parametric identification techniques for a three‐dimensional frame structure , 2012 .
[20] B. Moor,et al. Subspace identification for linear systems , 1996 .
[21] C. Chesi,et al. Norme tecniche per le costruzioni - In mezzo al guado , 2008 .
[22] L. Spedicato,et al. A digital analysis of the experimental accelerometers data used for buildings dynamical identification , 2016, 2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS).
[23] Fabrizio Vestroni,et al. Dynamic identification of a masonry building using forced vibration tests , 2005 .
[24] Carmelo Gentile,et al. Operational modal testing and FE model tuning of a cable-stayed bridge , 2011 .
[25] Guido De Roeck,et al. Uncertainty quantification in operational modal analysis with stochastic subspace identification: Validation and applications , 2016 .
[26] Salvador Ivorra,et al. Masonry bell towers. Dynamic considerations , 2011 .
[27] Antonio Borri,et al. Experimental Analysis of Dynamic Effects of FRP Reinforced Masonry Vaults , 2015, Materials.
[28] Xilin Lu,et al. Modal identification of Shanghai World Financial Center both from free and ambient vibration response , 2012 .
[29] Nicola Ivan Giannoccaro,et al. A Dynamic Identification of a Historical Building Using Accelerometers with Interface Modules and a Digital Synchronization Method , 2014 .
[30] Carmelo Gentile,et al. Dynamic testing of a historical slender building using accelerometers and radar , 2015 .