论文信息 - A New CCM (Carbon Composite Matrix) Material with Improved Shielding Effectiveness for X-Band Application

A New CCM (Carbon Composite Matrix) Material with Improved Shielding Effectiveness for X-Band Application

In this letter, a new CCM material, adding Ni powder to a conventional CCM, for X-band applications is designed and analyzed to improve the SE. To obtain the SE of the fabricated CCM accurately, material constants of the CCM of the permittivity and permeability were extracted using transmission/reflection measurements. Using the material constants derived from the measurement, the SE was calculated and the results were verified using a commercial full-wave three-dimensional electromagnetic wave simulator. The SE of the proposed the CCM was improved by approximately 4 dB in the X band compared to that of a conventional CCM. The CCM proposed in this paper can be applied as a shielding material as well as for housing of various communication systems and electrical instruments.

[1] D. Sun,et al. Measurement and simulation results of Ti coated microwave absorber , 1999, Proceedings of the 1999 Particle Accelerator Conference (Cat. No.99CH36366).

[2] Krishna Naishadham,et al. Measurement of the microwave conductivity of a polymeric material with potential applications in absorbers and shielding , 1991 .

[3] P. B. Jana,et al. Effects of sample thickness and fiber aspect ratio on EMI shielding effectiveness of carbon fiber filled polychloroprene composites in the X-band frequency range , 1992 .

[4] T. K. Chaki,et al. Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites , 2000 .

[5] E. J. Vanzura,et al. Improved technique for determining complex permittivity with the transmission/reflection method , 1990 .

[6] J. Baker-Jarvis. Transmission 1 Reflection and Short-circuit Line Permittivity Measurements , 2017 .

[7] D.D.L. Chung,et al. Materials for electromagnetic interference shielding , 2000, Materials Chemistry and Physics.

[8] D. Chung,et al. Increasing the electromagnetic interference shielding effectiveness of carbon fiber polymer–matrix composite by using activated carbon fibers , 2002 .