A rotary variable admittance device and its application in vehicle seat suspension vibration control

Abstract In this paper, a novel semi-active variable admittance (VA) concept is proposed, and a seat suspension prototype with a magnetorheological fluid damper based rotary VA device is designed, manufactured, and experimentally validated. The conventional inerter with a single flywheel has a constant inertance, which can effectively improve the suspension performance by being integrated into a mechanical network with springs and dampers. The proposed rotary VA device comprises a gear reducer, two flywheels and a variable damping (VD) device which is used to connect the two flywheels. With carefully designing, the rotary VA device is compacted and is similar with a VD device in size. The rotary VA device is installed in the centre of a seat suspension's scissors structure to form a VA seat suspension. According to the test results, the equivalent inertance of the seat suspension can vary from 11.3 Kg–76.6 Kg with a 3 Hz frequency and 5 mm amplitude sinusoidal movement by changing the current from 0 A–1 A. By analysing the system characteristics, a hybrid controller with two acceleration feedbacks is proposed. Thereafter, the seat suspension and controller are validated in experiments by comparing the performance with a conventional passive seat suspension. The random vibration test shows the excellent performance of the proposed seat suspension; the frequency weighted root mean square acceleration of the seat is reduced by 43.6%, which indicates a great improvement of the ride comfort. The VA device shows great prospect in the suspension application.

[1]  Fu-Cheng Wang,et al.  Impact of inerter nonlinearities on vehicle suspension control , 2008 .

[2]  Guanrong Chen,et al.  Performance Benefits of Using Inerter in Semiactive Suspensions , 2015, IEEE Transactions on Control Systems Technology.

[3]  Fu-Cheng Wang,et al.  The lateral stability of train suspension systems employing inerters , 2010 .

[4]  M.C. Smith,et al.  The missing mechanical circuit element , 2009, IEEE Circuits and Systems Magazine.

[5]  Shiwu Zhang,et al.  A seat suspension with a rotary magnetorheological damper for heavy duty vehicles , 2016 .

[6]  Kyoung Kwan Ahn,et al.  Active pneumatic vibration isolation system using negative stiffness structures for a vehicle seat , 2014 .

[7]  Yinlong Hu,et al.  Inerter-based semi-active suspensions with low-order mechanical admittance via network synthesis , 2018, Trans. Inst. Meas. Control.

[8]  Chen Long.  Researh on the Inerter Structure , 2012 .

[9]  David J. Wagg,et al.  Using an inerter‐based device for structural vibration suppression , 2014 .

[10]  Wang Ruochen.  Performance Analysis of Two-stage Series-connected Inerter-spring-damper Suspension Based on Half-car Model , 2012 .

[11]  Kyoung Kwan Ahn,et al.  A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat , 2011 .

[12]  Haiping Du,et al.  An Innovative Two-Layer Multiple-DOF Seat Suspension for Vehicle Whole Body Vibration Control , 2018, IEEE/ASME Transactions on Mechatronics.

[13]  Nong Zhang,et al.  Vibration control of an energy regenerative seat suspension with variable external resistance , 2018, Mechanical Systems and Signal Processing.

[14]  Shengyuan Xu,et al.  Semiactive Inerter and Its Application in Adaptive Tuned Vibration Absorbers , 2017, IEEE Transactions on Control Systems Technology.

[15]  Guanrong Chen,et al.  Semi-Active Suspension with Semi-Active Inerter and Semi-Active Damper , 2014 .

[16]  Weihua Li,et al.  An Energy Saving Variable Damping Seat Suspension System With Regeneration Capability , 2018, IEEE Transactions on Industrial Electronics.

[17]  Zengkang Gan,et al.  Adaptive control of an active seat for occupant vibration reduction , 2015 .

[18]  Seung-Bok Choi,et al.  Vibration control of electrorheological seat suspension with human-body model using sliding mode control , 2007 .

[19]  Zhan Shu,et al.  Passive vehicle suspensions employing inerters with multiple performance requirements , 2014 .

[20]  Fu-Cheng Wang,et al.  The performance improvements of train suspension systems with mechanical networks employing inerters , 2009 .

[21]  F-C Wang,et al.  Designing and testing a hydraulic inerter , 2011 .

[22]  Seung-bok Choi,et al.  Vibration Control of a MR Seat Damper for Commercial Vehicles , 2000 .

[23]  Guanrong Chen,et al.  Application of Semi-Active Inerter in Semi-Active Suspensions Via Force Tracking , 2016 .

[24]  Neil E. Houghton,et al.  Experimental testing and analysis of inerter devices , 2009 .

[25]  Fu-Cheng Wang,et al.  Performance Benefits in Passive Vehicle Suspensions Employing Inerters , 2004 .

[26]  Roger M. Goodall,et al.  Passive suspensions incorporating inerters for railway vehicles , 2012 .

[27]  Agathoklis Giaralis,et al.  Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems , 2014 .

[28]  Tianhong Yan,et al.  A Compact Variable Stiffness and Damping Shock Absorber for Vehicle Suspension , 2015, IEEE/ASME Transactions on Mechatronics.

[29]  James Lam,et al.  Control of vehicle suspension using an adaptive inerter , 2015 .

[30]  Igor Maciejewski,et al.  The vibration damping effectiveness of an active seat suspension system and its robustness to varying mass loading , 2010 .

[31]  David J. Wagg,et al.  Semi-active inerters using magnetorheological fluid: a feasibility study , 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[32]  Mi-Ching Tsai,et al.  Development of a Variable-Inertia Device With a Magnetic Planetary Gearbox , 2011, IEEE/ASME Transactions on Mechatronics.

[33]  Malcolm C. Smith.  Synthesis of mechanical networks: the inerter , 2002, IEEE Trans. Autom. Control..