Fracture toughness behavior in the ductile–brittle transition region of the tempered martensitic Eurofer97 steel: Experiments and modeling

The fracture toughness of the tempered martensitic stainless steel Eurofer97 has been experimentally characterized in the ductile-to-brittle transition (DBT) region with sub-sized compact tension specimens. The median fracture toughness–temperature curve in the lower transition region has been found to deviate somewhat from the master curve as described in the ASTM E1921-03 standard. Two-dimensional finite element simulations of the compact tension specimen have been performed. The analysis of the stress fields around the crack tip have been used to define a local criterion for cleavage based upon the attainment of a critical stress over a critical area. This local criterion has been used to reconstruct the lower bound in the transition region. The calibration procedure of the critical parameters has been discussed in detail as well as the uncertainty in the critical values. It is shown in particular that the critical stress is well defined while the model leads to a rather larger uncertainty in the determination of the critical area. © 2008 Elsevier Ltd. All rights reserved.

[1]  Robert H. Dodds,et al.  Specimen Size Requirements for Fracture Toughness Testing in the Transition Region , 1991 .

[2]  S. Ortner.  Factors affecting the shape of the ductile-to-brittle transition , 2002 .

[3]  A. Pineau,et al.  A local criterion for cleavage fracture of a nuclear pressure vessel steel , 1983 .

[4]  V. Doquet.  A FIRST STAGE IN THE DEVELOPMENT OF MICROMECHANICAL SIMULATIONS OF THE CRYSTALLOGRAPHIC PROPAGATION OF FATIGUE CRACKS UNDER MULTIAXIAL LOADING , 1998 .

[5]  Kim Wallin,et al.  Master curve analysis of the Euro fracture toughness dataset , 2002 .

[6]  Jacques Besson,et al.  Ductile to brittle transition of an A508 steel characterized by Charpy impact test: Part II: modeling of the Charpy transition curve , 2005 .

[7]  N. Baluc,et al.  Fracture toughness properties in the transition region of the Eurofer97 tempered martensitic steel , 2007 .

[8]  J. F. Knott,et al.  Effect of microstructure on cleavage fracture toughness of quenched and tempered steels , 1979 .

[9]  G. Odette,et al.  Plastic flow properties and fracture toughness characterization of unirradiated and irradiated tempered martensitic steels , 2007 .

[10]  Andrew H. Sherry,et al.  COMPENDIUM OF T‐STRESS SOLUTIONS FOR TWO AND THREE DIMENSIONAL CRACKED GEOMETRIES , 1995 .

[11]  Robert H. Dodds,et al.  A framework to correlate a/W ratio effects on elastic-plastic fracture toughness (Jc) , 1991 .

[12]  G. R. Odette,et al.  On the transition toughness of two RA martensitic steels in the irradiation hardening regime: a mechanism-based evaluation , 2002 .

[13]  M. He,et al.  Influence of statistical and constraint loss size effects on cleavage fracture toughness in the transition – A model based analysis , 2006 .

[14]  S. Roberts,et al.  Crack initiation in the brittle fracture of ferritic steels , 2006 .

[15]  G. R. Odette,et al.  Fracture toughness master-curve analysis of the tempered martensitic steel Eurofer97 , 2009 .

[16]  Pilar Fernández,et al.  Metallurgical characterization of the reduced activation ferritic/martensitic steel Eurofer'97 on as-received condition , 2001 .

[17]  C. Shih,et al.  Family of crack-tip fields characterized by a triaxiality parameter—II. Fracture applications , 1992 .

[18]  D Stienstra,et al.  A Theoretical Framework for Addressing Fracture in the Ductile-Brittle Transition Region , 1994 .

[19]  G. R. Odette,et al.  Cleavage fracture and irradiation embrittlement of fusion reactor alloys: mechanisms, multiscale models, toughness measurements and implications to structural integrity assessment , 2003 .

[20]  John R. Rice,et al.  ON THE RELATIONSHIP BETWEEN CRITICAL TENSILE STRESS AND FRACTURE TOUGHNESS IN MILD STEEL , 1973 .

[21]  J. Knott,et al.  Effects of microstructure on cleavage fracture in pressure vessel steel , 1986 .

[22]  Claudio Ruggieri,et al.  Calibration of Weibull stress parameters using fracture toughness data , 1998 .

[23]  G. R. Odette,et al.  A cleavage toughness master curve model , 2000 .

[24]  A. J. Carlsson,et al.  Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials , 1973 .

[25]  Robert H. Dodds,et al.  Continuum and micromechanics treatment of constraint in fracture , 1993, International Journal of Fracture.

[26]  Robert H. Dodds,et al.  Numerical investigation of 3-D constraint effects on brittle fracture in SE(B) and C(T) specimens , 1996 .

[27]  R. McMeeking.  Path dependence of the J-integral and the role of J as a parameter characterizing the near-tip field , 1977 .

[28]  C. Shih,et al.  Family of crack-tip fields characterized by a triaxiality parameter—I. Structure of fields , 1991 .