Effects of surface treatments and temperature on the oxidation behavior of 308L stainless steel cladding in hydrogenated high-temperature water

[1]  Wenyao Li,et al.  Promotion of pitting corrosion at hydrogen-enriched α/γ phase boundaries in austenitic stainless steel weld joints , 2022, Acta Materialia.

[2]  Tongmin Cui,et al.  Correlating oxidation resistance to stress corrosion cracking of 309L and 308L stainless steel claddings in simulated PWR primary water , 2022, Journal of Nuclear Materials.

[3]  Tianyu Zhu,et al.  Environment assisted cracking of 308L weld metal in high temperature water , 2021 .

[4]  Tongmin Cui,et al.  Hydrogen-enhanced oxidation of ferrite phase in stainless steel cladding and the contribution to stress corrosion cracking in deaerated high temperature water , 2021 .

[5]  Tongmin Cui,et al.  Effects of composition and microstructure on oxidation and stress corrosion cracking susceptibility of stainless steel claddings in hydrogenated PWR primary water , 2021 .

[6]  M. G. Burke,et al.  The effect of martensite on stress corrosion crack initiation of austenitic stainless steels in high-temperature hydrogenated water , 2021 .

[7]  Sung Hwan Kim,et al.  Effect of surface conditions and alloying elements on the early oxidation behaviour of two austenitic alloys in the pure steam environment , 2021 .

[8]  M. G. Burke,et al.  Effects of surface treatments on environmentally-assisted cracking susceptibility of Alloy 182 in BWR environment , 2021 .

[9]  Tongmin Cui,et al.  Oxidation Resistance and Stress Corrosion Cracking Susceptibility of 308L and 309L Stainless Steel Cladding Layers in Simulated Pressurized Water Reactor Primary Water , 2021 .

[10]  Litao Chang,et al.  Effect of machining on oxide development in type 316L stainless steel in high-temperature hydrogenated water , 2021, Corrosion Science.

[11]  E. Han,et al.  Environmentally assisted fatigue behavior of 308L weld metal in borated and lithiated high-temperature water , 2020 .

[12]  Kai Chen,et al.  Effect of intergranular carbides on the cracking behavior of cold worked alloy 690 in subcritical and supercritical water , 2020 .

[13]  H. Jing,et al.  Effect of δ-ferrite on stress corrosion cracking of CF8A austenitic stainless steels in a simulated pressurised water reactor environment , 2019, Journal of Materials Research and Technology.

[14]  Kai Chen,et al.  Effect of δ-ferrite on the stress corrosion cracking behavior of 321 stainless steel , 2019, Corrosion Science.

[15]  S. Lozano-Perez,et al.  The effects of intergranular carbides on the grain boundary oxidation and cracking in a cold-worked Alloy 600 , 2019, Corrosion Science.

[16]  T. Shoji,et al.  Magnetoelectropolishing treatment for improving the oxidation resistance of 316L stainless steel in pressurized water reactor primary water , 2019, Journal of Nuclear Materials.

[17]  M. G. Burke,et al.  Understanding the effect of surface finish on stress corrosion crack initiation in warm-forged stainless steel 304L in high-temperature water , 2019, Scripta Materialia.

[18]  Xuelian Xu,et al.  The corrosion behaviour of alloy 690 tube in simulated PWR secondary water with the effect of solid diffusing hydrogen , 2019, Journal of Nuclear Materials.

[19]  M. G. Burke,et al.  Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water , 2019, Acta Materialia.

[20]  K. Arioka,et al.  Mechanistic understanding of the temperature dependence of crack growth rate in alloy 600 and 316 stainless steel through high-resolution characterization , 2019, Acta Materialia.

[21]  M. G. Burke,et al.  Stress corrosion crack initiation in machined type 316L austenitic stainless steel in simulated pressurized water reactor primary water , 2018, Corrosion Science.

[22]  D. Retraint,et al.  Influence of Surface Mechanical Attrition Treatment on the oxidation behaviour of 316L stainless steel , 2018 .

[23]  M. G. Burke,et al.  The Effect of Temperature on the Preferential Intergranular Oxidation Susceptibility of Alloy 600 , 2018, Metallurgical and Materials Transactions A.

[24]  E. Han,et al.  Effect of temperature on corrosion behavior of alloy 690 in high temperature hydrogenated water , 2017, Journal of Materials Science & Technology.

[25]  Zhanpeng Lu,et al.  Characterization of microstructure of A508III/309L/308L weld and oxide films formed in deaerated high-temperature water , 2018 .

[26]  Yujin Hu,et al.  Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water , 2017 .

[27]  L. Qiao,et al.  Effect of hydrogen on semiconductive properties of passive film on ferrite and austenite phases in a duplex stainless steel , 2017, Scientific Reports.

[28]  Naiqiang Zhang,et al.  Influence of temperature on the oxidation behaviour of a ferritic-martensitic steel in supercritical water , 2016 .

[29]  Ahsan Ejaz,et al.  The effects of temperature and aeration on the corrosion of A508III low alloy steel in boric acid solutions at 25–95 °C , 2016 .

[30]  R. Bosch,et al.  Effect of temperature and dissolved hydrogen on oxide films formed on Ni and Alloy 182 in simulated PWR water , 2016 .

[31]  Yujin Hu,et al.  Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel , 2016 .

[32]  T. Shoji,et al.  The effects of cold rolling orientation and water chemistry on stress corrosion cracking behavior of 316L stainless steel in simulated PWR water environments , 2016 .

[33]  Zhanpeng Lu,et al.  Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment , 2015 .

[34]  E. Han,et al.  Effects of surface states on the oxidation behavior of 316LN stainless steel in high temperature pressurized water , 2015 .

[35]  E. Han,et al.  Effect of surface state on the oxidation behavior of welded 308L in simulated nominal primary water of PWR , 2015 .

[36]  E. Han,et al.  Analysis of Surface Oxide Films Formed in Hydrogenated Primary Water on Alloy 690TT Samples With Different Surface States , 2014 .

[37]  G. Botton,et al.  Internal oxidation of Alloy 600 exposed to hydrogenated steam and the beneficial effects of thermal treatment , 2014 .

[38]  M. Tabarant,et al.  Hydrogen absorption associated with the corrosion mechanism of 316L stainless steels in primary medium of Pressurized Water Reactor (PWR) , 2014 .

[39]  S. Lozano-Perez,et al.  SCC in PWRs: Learning from a Bottom-Up Approach , 2014 .

[40]  V. Kain,et al.  High temperature oxidation behavior of AISI 304L stainless steel—Effect of surface working operations , 2013 .

[41]  H. Abe,et al.  Role of δ-ferrite in stress corrosion cracking retardation near fusion boundary of 316NG welds , 2012 .

[42]  Wei Ke,et al.  Characterization of Different Surface States and Its Effects on the Oxidation Behaviours of Alloy 690TT , 2012 .

[43]  Takuyo Yamada,et al.  The role of cold work and applied stress on surface oxidation of 304 stainless steel , 2012 .

[44]  E. Andrieu,et al.  Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water , 2012 .

[45]  Wei Ke,et al.  Influence of dissolved oxygen on oxide films of Alloy 690TT with different surface status in simulated primary water , 2011 .

[46]  Y. Qiu,et al.  Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water , 2011 .

[47]  E. Han,et al.  Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution , 2009 .

[48]  U. K. Mudali,et al.  Hydrogen effects on pitting corrosion and semiconducting properties of nitrogen-containing type 316L stainless steel , 2009 .

[49]  K. Ogawa,et al.  Early stage SCC initiation analysis of fcc Fe―Cr―Ni ternary alloy at 288 °C: A quantum chemical molecular dynamics approach , 2009 .

[50]  R. Newman,et al.  Effect of Surface Preparation on Intergranular Stress Corrosion Cracking of Alloy 600 in Hydrogenated Steam , 2008 .

[51]  K. Ogawa,et al.  Quantum chemical molecular dynamics study of stress corrosion cracking behavior for fcc Fe and Fe–Cr surfaces , 2008 .

[52]  Y. Takeda,et al.  Effects of loading mode and water chemistry on stress corrosion crack growth behavior of 316L HAZ and weld metal materials in high temperature pure water , 2008 .

[53]  T. Terachi,et al.  Cold Work and Temperature Dependence of Stress Corrosion Crack Growth of Austenitic Stainless Steels in Hydrogenated and Oxygenated High-Temperature Water , 2007 .

[54]  Y. Takeda,et al.  Effects of Loading Mode and Temperature on Stress Corrosion Crack Growth Rates of a Cold-Worked Type 316L Stainless Steel in Oxygenated Pure Water , 2007 .

[55]  Jiann-Kuo Wu,et al.  Effect of surface finish on the corrosion behavior of commercial 7075 Al alloy , 1992 .

[56]  J. Robertson.  The mechanism of high temperature aqueous corrosion of stainless steels , 1991 .

[57]  R. Staehle,et al.  Effects of Temperature on the Kinetics of Passive Film Growth on Iron , 1975 .

[58]  J. C. Fisher.  Calculation of Diffusion Penetration Curves for Surface and Grain Boundary Diffusion , 1951 .