Secondary Recrystallization Behaviors of Grain-Oriented 6.5 wt% Silicon Steel Sheets Produced by Rolling and Nitriding Processes

[1]  W. Mao,et al.  Effect of texture and grain size on the magnetic flux density and core loss of cold-rolled high silicon steel sheets , 2015 .

[2]  F. Gao,et al.  Effects of rolling temperature on microstructure, texture, formability and magnetic properties in strip casting Fe-6.5 wt% Si non-oriented electrical steel , 2015 .

[3]  Zhen-Yu Liu,et al.  Microstructure, texture evolution and magnetic properties of strip-casting non-oriented 6.5 wt.% Si electrical steel doped with cerium , 2015 .

[4]  Bernardo Kucinski.  43 , 2014, Testament d'un patriote exécuté.

[5]  Jongryoul Kim,et al.  Influence of cooling rate on iron loss behavior in 6.5 wt% grain-oriented silicon steel , 2014 .

[6]  Fei Gao,et al.  Development of λ-fiber recrystallization texture and magnetic property in Fe–6.5 wt% Si thin sheet produced by strip casting and warm rolling method , 2013 .

[7]  Jongryoul Kim,et al.  Effect of ${\rm D}0_{3}$ Ordered Phase on Total Loss of 6.5 wt% Grain-Oriented Silicon Steel , 2012, IEEE Transactions on Magnetics.

[8]  J. Lin,et al.  Cold rolled Fe-6.5 wt. % Si alloy foils with high magnetic induction , 2012 .

[9]  Jongryoul Kim,et al.  Influence of Low Temperature Heat Treatment on Iron Loss Behaviors of 6.5 wt% Grain-oriented Silicon Steels , 2012 .

[10]  W. Mao,et al.  Analysis of Micro-texture during Secondary Recrystallization in a Hi-B Electrical Steel , 2011 .

[11]  K. Shin,et al.  Iron Loss Influenced by Magnetic Annealing in 0.1-mm-Thick Grain-Oriented High-Silicon Steels , 2011, IEEE Transactions on Magnetics.

[12]  G. Chen,et al.  Effect of annealing temperature on magnetic properties of cold rolled high silicon steel thin sheet , 2010 .

[13]  C. Hou,et al.  Effect of nitriding time on secondary recrystallization behaviors and magnetic properties of grain-oriented electrical steel , 2010 .

[14]  Y. Ushigami,et al.  Effect of nitriding on grain oriented silicon steel bearing aluminum (the second study) , 2006 .

[15]  Y. Ushigami,et al.  The improvement of primary texture for sharp Goss orientation on grain oriented silicon steel , 2003 .

[16]  M. Kurosawa,et al.  Orientation relationship between primary and secondary recrystallized texture in electrical steel , 2002 .

[17]  P. Lin,et al.  Coincidence Site Lattice (CSL) grain boundaries and Goss texture development in Fe-3% Si alloy , 1996 .

[18]  T. Hiratani,et al.  Magnetic properties and workability of 6.5% Si steel sheet , 1996 .

[19]  Y. Ushigami,et al.  Magnetic properties of (110)[001] grain oriented 6.5% silicon steel , 1991 .

[20]  Munetsugu Matsuo,et al.  Texture Control in the Production of Grain Oriented Silicon Steels , 1989 .

[21]  P. Swann,et al.  The B2 and DO3 Ordering Reactions in Iron–Silicon Alloys in the Vicinity of the Curie Temperature , 1975 .