Experimental evaluation of energy optimization algorithm for mobile robots in three-dimension motion using predictive control

Torque saturation of DC motors of the wheels of mobile robots is one of the main difficulties during climbing hills. A two-DC motor-driven wheels mobile robot is used in the present work to attempt crossing a ditch-like hindrance using predictive control. The proposed predictive control algorithm is compared with the PID control and the open-loop control. Experimental examination of energy optimization algorithm for mobile robots is presented. The experimental results showed a good agreement with the simulation results confirming the capability of the predictive control to avoid torque saturation and indicating a noticeable reduction in the energy consumption. Additionally, a theoretical parametric study of the predictive control is presented. The effects of the road slope and the prediction horizon length on the consumed energy are evaluated. The analytical study showed that the energy consumption is reduced by increasing the prediction horizon until it reaches a limit at which no more energy reduction is obtained. This limit is proportional to the width of the ditch in front of the mobile robot.

[1]  S. Joe Qin,et al.  A survey of industrial model predictive control technology , 2003 .

[2]  James B. Rawlings,et al.  Tutorial overview of model predictive control , 2000 .

[3]  Wei Yu,et al.  Analysis and Experimental Verification for Dynamic Modeling of A Skid-Steered Wheeled Vehicle , 2010, IEEE Transactions on Robotics.

[4]  Jianghai Hu,et al.  Optimal solutions to a class of power management problems in mobile robots , 2009, Autom..

[5]  Bibhya N. Sharma,et al.  An asymptotically stable collision-avoidance system , 2008 .

[6]  O. Egeland,et al.  Trajectory planning and collision avoidance for underwater vehicles using optimal control , 1994 .

[7]  J.T. Economou,et al.  Gear locking mechanism to extend the consistent power operating region of the electric motor to enhance acceleration and regenerative braking efficiency in hybrid electric vehicles , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[8]  Wei Yu,et al.  Power modeling of a skid steered wheeled robotic ground vehicle , 2009, 2009 IEEE International Conference on Robotics and Automation.

[9]  Jerzy Z. Sasiadek,et al.  Energy consumption optimization for mobile robots in three-dimension motion using predictive control , 2013, 2013 9th Asian Control Conference (ASCC).

[10]  Jorge L. Martínez,et al.  Simplified power consumption modeling and identification for wheeled skid-steer robotic vehicles on hard horizontal ground , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Henrik Schiøler,et al.  Potentially Distributable Energy: Towards Energy Autonomy in Large Population of Mobile Robots , 2007, 2007 International Symposium on Computational Intelligence in Robotics and Automation.

[12]  C. Knospe,et al.  PID control , 2006, IEEE Control Systems.