Identifiability of Location and Magnitude of Flow Barriers in Slightly Compressible Flow

Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between wells can be identified. We extend the classic analysis by including compressibility effects. We use two approaches: a twin experiment with synthetic production data for use with a time-domain parameter-estimation technique, and a transfer-function formalism in the form of bilaterally coupled four-ports allowing for an analysis in the frequency domain. We investigate the identifiability, from noisy production data, of the location and the magnitude of a low-permeability barrier to slightly compressible flow in a 1D configuration. We use an unregularized adjoint-based optimization scheme for the numerical time-domain estimation, by use of various levels of sensor noise, and confirm the results by use of the semianalytical transfer-function approach. Both the numerical and semianalytical results show that it is possible to identify the location and the magnitude of the permeability in the barrier from noise-free data. By introducing increasingly higher noise levels, the identifiability gradually deteriorates, but the location of the barrier remains identifiable for much-higher noise levels than the permeability. The shape of the objective-function surface, in normalized variables, indeed indicates a much-higher sensitivity of the well data to the location of the barrier than to its magnitude. These theoretical results appear to support the empirical finding that unregularized gradient-based history matching in large reservoir models, which is well-known to be a severely ill-posed problem, occasionally leads to useful results in the form of model-parameter updates with unrealistic magnitudes but indicating the correct location of model deficiencies.

[1]  Dean S. Oliver,et al.  Multiple Realizations of the Permeability Field From Well Test Data , 1996 .

[2]  O. Bosgra,et al.  Controllability, observability and identifiability in single-phase porous media flow , 2008 .

[3]  Sippe G. Douma,et al.  Identification of Parameters in Large Scale Physical Model Structures, for the Purpose of Model-Based Operations , 2009 .

[4]  Albert C. Reynolds,et al.  Determination of Permeability Distribution From Well-Test Pressure Data , 1994 .

[5]  Ning Liu,et al.  Inverse Theory for Petroleum Reservoir Characterization and History Matching , 2008 .

[6]  M. Green.  Confidence limits. , 1972, Lancet.

[7]  R. W. Stallman,et al.  Nonequilibrium type curves modified for two-well systems , 1951 .

[8]  J. Willems,et al.  Parametrizations of linear dynamical systems: Canonical forms and identifiability , 1974 .

[9]  J.F.M. Van Doren,et al.  Model Structure Analysis of Model-based Operation of Petroleum Reservoirs , 2010 .

[10]  Gerard J.P. Joosten,et al.  Practical And Operational Use Of Assisted History Matching And Model-Based Optimisation In The Salym Field , 2011 .

[11]  Michael M. Levitan,et al.  General Heterogeneous Radial and Linear Models for Well Test Analysis , 1995 .

[12]  Roland N. Horne,et al.  Interference testing: detecting a circular impermeable or compressible subregion , 1988 .

[13]  Paul M. J. Van den Hof,et al.  Multivariable frequency domain identification using IV-based linear regression , 2010, 49th IEEE Conference on Decision and Control (CDC).

[14]  Shah Shah,et al.  Error Analysis in History Matching: The Optimum Level of Parameterization , 1978 .

[15]  Ali H. Dogru,et al.  Confidence Limits on the Parameters and Predictions of Slightly Compressible, Single-Phase Reservoirs , 1977 .

[16]  Roland N. Horne,et al.  Estimating Permeability Distributions From Pressure Pulse Testing , 2010 .

[17]  L. M. Yaxley,et al.  Effect of a Partially Communicating Fault on Transient Pressure Behavior , 1987 .

[18]  George R. Gavalas,et al.  Identifiability of Estimates of Two-Phase Reservoir Properties in History Matching , 1984 .

[19]  P.J.P. Egberts,et al.  Optimal waterflood design using the adjoint method , 2007 .

[20]  Paul M.J. Van den Hof,et al.  Determining Identifiable Parameterizations for Large-scale Physical Models in Reservoir Engineering , 2008 .

[21]  J. Jansen,et al.  Hidden Information in Ill-posed Inverse Problems , 2014 .

[22]  Albert C. Reynolds,et al.  An Improved Implementation of the LBFGS Algorithm for Automatic History Matching , 2004 .