Impact-modified nylon 6/polypropylene blends: 1. Morphology-property relationships

[1]  J. Seppälä,et al.  Effects of compatibilization on fractionated crystallization of PA6/PP blends , 1993 .

[2]  Jaehwan Lee,et al.  Influence of the mechanical properties of the dispersed phase upon the behaviour of nylon/rubber blends : crosslinking effect , 1993 .

[3]  J. Seppälä,et al.  Effects of compatibilizers on the properties of polyamide/polypropylene blends , 1992 .

[4]  Jiann-Shing Wu,et al.  Fracture and impact properties of polycarbonates and MBS elastomer‐modified polycarbonates , 1992 .

[5]  D. Lawson,et al.  Preparation and characterization of heterophase blends of polycaprolactam and hydrogenated polydienes , 1990 .

[6]  G. Serpe,et al.  Morphology‐processing relationships in polyethylene‐polyamide blends , 1990 .

[7]  B. D. Favis,et al.  The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing , 1987 .

[8]  J. J. Elmendorp,et al.  A study on polymer blending microrheology: Part IV. The influence of coalescence on blend morphology origination , 1986 .

[9]  J. Manson,et al.  Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks , 1986 .

[10]  D. Uhlmann,et al.  Rubber‐toughening in polypropylene , 1985 .

[11]  Y. Mizutani,et al.  Annealing of polypropylene/poly(ethylene-co-propylene) blend. II. Influence of the structure and properties of poly(ethylene-co-propylene) and blended polyethylene on impact strength , 1985 .

[12]  A. Gupta,et al.  Tensile yield behavior of PP/SEBS blends , 1984 .

[13]  K. Dao.  Rubber phase dispersion in polypropylene , 1984 .

[14]  Zhiliu Feng,et al.  MORPHOLOGY AND PROPERTIES OF BLENDS OF POLYPROPYLENE WITH ETHYLENE-PROPYLENE RUBBER , 1984 .

[15]  W. Heckmann,et al.  Improved low temperature impact strength of polypropylene by modification with polyethylene , 1983 .

[16]  K. Dao.  Mechanical properties of polypropylene/crosslinked rubber blends , 1982 .

[17]  G. Wissler,et al.  Structure and properties of rubber-modified polypropylene impact blends , 1981 .

[18]  N. Tokita.  Analysis of Morphology Formation in Elastomer Blends , 1977 .

[19]  A. Hasegawa,et al.  Studies on polymer blend of nylon 6 and polypropylene or nylon 6 and polystyrene using the reaction of polymer , 1974 .

[20]  R. J. Gaymans,et al.  Nylon-6/rubber blends: 6. Notched tensile impact testing of nylon-6/(ethylene-propylene rubber) blends , 1994 .

[21]  R. J. Gaymans,et al.  Nylon-6/rubber blends: 7. Temperature-time effects in the impact behaviour of nylon/rubber blends , 1994 .

[22]  R. J. Gaymans,et al.  Nylon-6/rubber blends: 8. Influence of the molecular weight of the matrix on the impact behaviour , 1994 .

[23]  D. R. Paul,et al.  Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon-6 , 1992 .

[24]  D. R. Paul,et al.  Rubber toughening of polyamides with functionalized block copolymers: 2. Nylon-6,6 , 1992 .

[25]  M. J. Modic,et al.  MODIFYING POLYAMIDE BLENDS FOR HIGH IMPACT STRENGTH , 1991 .

[26]  Y. Tervoort-Engelen,et al.  Ruthenium tetraoxide staining for transmission electron microscopy of polypropylene/EPDM/high density polyethylene blends , 1991 .

[27]  Masayoshi Okubo,et al.  Makromol Chem-Macromol Symp , 1990 .

[28]  R. J. Gaymans,et al.  Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer , 1989 .

[29]  R. J. Gaymans,et al.  Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism , 1989 .

[30]  R. J. Gaymans,et al.  Impact behaviour of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydride , 1989 .