论文信息 - Analysis of absorptive and transmissive radome

Analysis of absorptive and transmissive radome

This paper analyzes the influence of geometric dimensions of absorptive/transmissive radome to its performance based on equivalent circuit theory. When the impedance of free space matches the impedance of absorber, no wave would be reflected and most energy would be absorbed. The absorptive/transmissiveradome is consisted by aperture frequency selective surface(FSS), substrate and absorptive FSS. Aperture FSS decides the pass band of radome and resistive FSS and thickness of substrate has great influence on the absorptive band. Conclusions obtained by equivalent circuit theory were verified in HFSS.

[1] Qiang Chen,et al. A planar stealthy antenna radome using absorptive frequency selective surface , 2014 .

[2] Liu Li-guo,et al. Design of an Invisible Radome by Frequency Selective Surfaces Loaded with Lumped Resistors , 2013 .

[3] Shi Hongyu,et al. A broadband transmission absorption polarization-independent metamaterial absorber , 2013 .

[4] R. Mittra,et al. Techniques for analyzing frequency selective surfaces-a review , 1988, Proc. IEEE.

[5] Hua Ma,et al. Experimental Demonstration of An Absorptive/Transmissive FSS With Magnetic Material , 2014, IEEE Antennas and Wireless Propagation Letters.

[6] F. Costa,et al. Efficient Analysis of Frequency-Selective Surfaces by a Simple Equivalent-Circuit Model , 2012, IEEE Antennas and Propagation Magazine.

[7] Yunqi Fu,et al. A Miniaturized Absorptive Frequency Selective Surface , 2015, IEEE Antennas and Wireless Propagation Letters.

[8] F. Costa,et al. A Frequency Selective Radome With Wideband Absorbing Properties , 2012, IEEE Transactions on Antennas and Propagation.