Optimal design and operating strategy of a carbon-clean micro gas turbine for combined heat and power applications

Abstract As a distributed energy production technology, micro gas turbines (mGTs) offer a great potential for small-scale combined heat and power (CHP) production, adding flexibility to the electricity system. Nevertheless, due to the evident climate change, a very low greenhouse gas (GHG) emission is a fundamental requirement for our future energy systems. For this purpose, combining an mGT with a carbon capture (CC) plant might offer an effective carbon clean energy production. In the literature, several studies are available, addressing individual aspects of this attractive energy solution; however, an in-depth analysis focusing on the energy integration and strategy optimisation of an mGT working in CHP mode with CC has never been performed. This work is the continuation of the previous thermodynamic analysis in which an mGT and a micro Humid Air Turbine (mHAT) have been directly connected with a CC unit without heat recovery. In the current study, the aim is to find the best plant layout and the best operating strategy based on the electrical, thermal and global cycle performance. Results show that the full CHP operation of the mGT offers the highest global efficiency between all plant layouts. Contrary to what may be expected from previous analyses on cycle humidification, the mHAT does not entail a better performance when the turbine cycle and the CC unit are energetically integrated. Direct heat recovery, which reduces the CC thermal demand, is a preferable measure which involves a lower energy degradation. Sankey and Grassmann diagrams are presented to support the numerical results.

[1]  M. Mercedes Maroto-Valer,et al.  An overview of current status of carbon dioxide capture and storage technologies , 2014 .

[2]  Ying Zhang,et al.  Thermodynamic Modeling for CO2Absorption in Aqueous MDEA Solution with Electrolyte NRTL Model , 2011 .

[3]  Mark R. Wilkins,et al.  Carbon dioxide conversion to fuels and chemicals using a hybrid green process , 2013 .

[4]  Svend Bram,et al.  Humidified micro gas turbines for domestic users: An economic and primary energy savings analysis , 2016 .

[5]  Svend Bram,et al.  Waste heat recovery optimization in micro gas turbine applications using advanced humidified gas turbine cycle concepts , 2017 .

[6]  Svend Bram,et al.  Optimal waste heat recovery in micro gas turbine cycles through liquid water injection , 2014 .

[7]  Simone Giorgetti,et al.  Carbon capture on micro gas turbine cycles: Assessment of the performance on dry and wet operations , 2017 .

[8]  Mohsen Assadi,et al.  Benchmarking of a micro gas turbine model integrated with post-combustion CO2 capture , 2017 .

[9]  Derek B. Ingham,et al.  Impact of CO2-enriched combustion air on micro-gas turbine performance for carbon capture , 2016 .

[11]  Svend Bram,et al.  Effects of steam injection on microturbine efficiency and performance , 2008 .

[12]  Aie,et al.  Energy Technology Perspectives 2012 , 2006 .

[13]  Kathrin Volkart,et al.  Life Cycle Assessment of Power-to-Gas: Approaches, system variations and their environmental implications , 2017 .

[14]  Ayyaz Muhammad,et al.  Humidified exhaust recirculation for efficient combined cycle gas turbines , 2016 .

[15]  Mario Ditaranto,et al.  Investigation on the in-flame NO reburning in turbine exhaust gas , 2009 .

[16]  Ward De Paepe,et al.  Does humidification improve the micro Gas Turbine cycle? Thermodynamic assessment based on Sankey and Grassmann diagrams ☆ , 2017 .

[17]  J. Sheng.  Enhanced oil recovery in shale reservoirs by gas injection , 2015 .

[18]  N. Mac Dowell,et al.  Off-design point modelling of a 420MW CCGT power plant integrated with an amine-based post-combustion CO2 capture and compression process , 2016 .

[19]  Lin Ma,et al.  Effect of the CO2 enhancement on the performance of a micro gas turbine with a pilot-scale CO2 capture plant , 2017 .

[20]  Svend Bram,et al.  Water injection in a micro gas turbine – Assessment of the performance using a black box method , 2013 .

[21]  Mohamed Pourkashanian,et al.  Influence of Gas Turbine Exhaust CO2 Concentration on the Performance of Post Combustion Carbon Capture Plant , 2015 .

[22]  M. Thring.  World Energy Outlook , 1977 .

[23]  Mario Schmidt,et al.  The Sankey Diagram in Energy and Material Flow Management , 2008 .

[24]  Massimiliano Renzi,et al.  Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior , 2014 .

[25]  Roberto Canepa,et al.  Techno-economic analysis of a CO2 capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant , 2015 .

[26]  Alberto Traverso,et al.  Micro Humid Air Cycle: Part A — Thermodynamic and Technical Aspects , 2003 .

[27]  Carolina Font Palma,et al.  Experimental and Process Modelling Study of Integration of a Micro-turbine with an Amine Plant , 2014 .

[28]  Mohamed Pourkashanian,et al.  Performance evaluation of PACT Pilot-plant for CO2 capture from gas turbines with Exhaust Gas Recycle , 2016 .

[29]  D. E. R E K A B B O T T.  Addressing the Intermittency Challenge : Massive Energy Storage in a Sustainable Future , 2012 .

[30]  Ahmed Mostafa Elkady,et al.  Application of Exhaust Gas Recirculation in a DLN F-Class Combustion System for Postcombustion Carbon Capture , 2009 .

[31]  Ying Zhang,et al.  Thermodynamic modeling for CO2 absorption in aqueous MEA solution with electrolyte NRTL model , 2011 .

[32]  Svend Bram,et al.  Exhaust Gas Recirculation on Humidified Flexible Micro Gas Turbines for Carbon Capture Applications , 2016 .

[33]  Simone Giorgetti,et al.  Carbon capture on a micro gas turbine: assessment of the performance , 2017 .

[34]  T. J. Kotas,et al.  The Exergy Method of Thermal Plant Analysis , 2012 .

[35]  Ahmed Mostafa Elkady,et al.  On the Performance and Operability of GE’s Dry Low NOx Combustors utilizing Exhaust Gas Recirculation for PostCombustion Carbon Capture , 2009 .

[36]  Miguel Angel Gonzalez-Salazar,et al.  Recent developments in carbon dioxide capture technologies for gas turbine power generation , 2015 .

[37]  Ward De Paepe,et al.  Experimental characterisation of a micro Humid Air Turbine: assessment of the thermodynamic performance , 2017 .

[38]  Ashok Rao,et al.  Mitigation of greenhouse gases from gas turbine power plants , 1996 .

[39]  Mohsen Assadi,et al.  Micro gas turbine configurations with carbon capture – Performance assessment using a validated thermodynamic model , 2014 .

[40]  Hailong Li,et al.  Technologies for increasing CO2 concentration in exhaust gas from natural gas-fired power production with post-combustion, amine-based CO2 capture , 2011 .

[41]  Henrique A. Matos,et al.  Modeling of existing cooling towers in ASPEN PLUS using an equilibrium stage method , 2012 .

[42]  Abigail González-Díaz,et al.  Natural gas combined cycle with exhaust gas recirculation and CO2 capture at part-load operation , 2017, Journal of the Energy Institute.

[43]  Svend Bram,et al.  T100 Micro Gas Turbine Converted to Full Humid Air Operation: Test Rig Evaluation , 2014 .

[44]  E. Tzimas,et al.  Methanol synthesis using captured CO2 as raw material: Techno-economic and environmental assessment , 2016 .

[45]  Robert Schwartz,et al.  The John Zink Combustion Handbook , 2001 .