The effect of natural sand composition on concrete strength

Abstract Natural sands show a variety of mineralogic compositions and chemical characteristics; when sand is used in concrete aggregate, these properties may result in different concrete strengths. However, there is little data about the effects of different sand aggregates on concrete strength. In this work we highlight some mechanical aspects regarding the use of sand from different origins such as concrete aggregate. The sand samples were first tested to determine their mineralogic and chemical characteristics and their aggregate properties. Then, concrete test samples were prepared using these aggregates, and the properties of the fresh and hardened concrete were determined. The results show that although all the samples were found to be suitable for use as fine aggregate in high-strength concrete production, natural sands that contained smectite-type clays have poor aggregate quality compared with other sands. Conversely, the chemical composition of the natural sand samples, especially the Na2O content, is important for predicting the strength properties of hardened concrete.

[1]  N. Sabatakakis,et al.  Resistance variation of low-quality aggregates , 2007 .

[2]  M.D.A. Thomas,et al.  Concrete aggregates and the durability of concrete , 2007 .

[3]  H. Marzouk,et al.  The effect of alkali-aggregate reactivity on the mechanical properties of high and normal strength concrete , 2003 .

[4]  A. Tugrul,et al.  Evaluation of alkali reactivity of natural sands , 2012 .

[5]  Leslie J. Struble,et al.  Swelling Properties of Synthetic Alkali Silica Gels , 1981 .

[6]  Prithvi S. Kandhal,et al.  TESTS FOR PLASTIC FINES IN AGGREGATES RELATED TO STRIPPING IN ASPHALT PAVING MIXTURES , 1998 .

[7]  G McNally,et al.  Soil and Rock Construction Materials , 1998 .

[8]  A. Harthi,et al.  Wadi natural aggregates in Western Saudi Arabia for use in Concrete , 1997 .

[9]  P. K. Mehta,et al.  Concrete: Microstructure, Properties, and Materials , 2005 .

[10]  A. Neville.  Properties of Concrete , 1968 .

[11]  D. Fowler,et al.  THE EFFECTS OF AGGREGATES CHARACTERISTICS ON THE PERFORMANCE OF PORTLAND CEMENT CONCRETE , 2003 .

[12]  A. Katz,et al.  Effect of High Levels of Fines Content on Concrete Properties , 2006 .

[13]  Mark Alexander,et al.  Aggregates and the Deformation Properties of Concrete , 1996 .

[14]  H. Bowen,et al.  Thermal Segregation of Cations in Iron Aluminate Spinels , 1981 .

[15]  Ramzi Taha,et al.  The effect of the mineralogy of coarse aggregate on the mechanical properties of high-strength concrete , 2006 .

[16]  L Collis,et al.  Aggregates: Sand, gravel and crushed rock aggregates for construction purposes , 1985 .

[17]  E. Stapel,et al.  THE USE OF THE METHYLENE BLUE ADSORPTION TEST IN ASSESSING THE QUALITY OF BASALTIC TUFF ROCK AGGREGATE , 1989 .

[18]  P. G. Fookes,et al.  An introduction to the influence of natural aggregates on the performance and durability of concrete , 1980, Quarterly Journal of Engineering Geology.

[19]  C. L. Page,et al.  Pore Solution Chemistry and Alkali Aggregate Reaction , 1987, SP-100: Concrete Durability: Proceedings of Katharine and Bryant Mather International Symposium.

[20]  M. Moranville-Regourd,et al.  MODELLING OF EXPANSION INDUCED BY ASR - NEW APPROACHES , 1997 .

[21]  A. Binal.  The determination of gel swelling pressure of reactive aggregates by ASGPM device and a new reactive-innocuous aggregate decision chart , 2008 .