Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete

Abstract Plastic concrete is susceptible to develop cracks due to shrinkage in dry and windy conditions. Addition of fibers could reduce propagation of this crack. On the other hand, permeability determines the durability properties of concrete. This study evaluated strength, plastic shrinkage and permeability (gas and water) of concrete incorporating ‘polypropylene’ fiber (aspect ratio 300) in various proportions (viz. 0.10%, 0.15%, 0.2%, 0.25% and 0.3%) by volume of concrete. Plane concrete samples were also prepared and tested for reference purpose. Inclusion of 0.1% fiber gave minor reduction (2%) in compressive strength while the tensile strength increased by 39% with same fiber content compared to the plain concrete. A significant reduction in crack generation, appearance period of first crack and crack area between plane concrete and fiber reinforced concretes was found. The experimental result with inclusion of 0.1–0.3% fiber in concrete indicated that plastic shrinkage cracks were reduced by 50–99% compared to the plain concrete. For reference concrete (without fiber), test within the high temperature and controlled humidity chamber gave higher crack width than the acceptable limit (3 mm) specified by the ACI 224. With the inclusion of 0.1% fiber reduced the crack width down to 1 mm and the trend was continued with the addition of more fibers. However, results showed that with the addition of polypropylene fiber both water and gas permeability coefficient was increased. Therefore, it is concluded that the fiber reinforced concrete would work better for plastic shrinkage susceptible structural elements (flat elements such as slab); however, it requires careful judgement while applying to a water retaining structures.