The Best-of-2-Worlds philosophy: developing local dismantling and global infrastructure network for sustainable e-waste treatment in emerging economies.

E-waste is a complex waste category containing both hazardous and valuable substances. It demands for a cost-efficient treatment system which simultaneously liberates and refines target fractions in an environmentally sound way. In most developing countries there is a lack of systems covering all steps from disposal until final processing due to limited infrastructure and access to technologies and investment. This paper introduces the 'Best-of-2-Worlds' philosophy (Bo2W), which provides a network and pragmatic solution for e-waste treatment in emerging economies. It seeks technical and logistic integration of 'best' pre-processing in developing countries to manually dismantle e-waste and 'best' end-processing to treat hazardous and complex fractions in international state-of-the-art end-processing facilities. A series of dismantling trials was conducted on waste desktop computers, IT equipment, large and small household appliances, in order to compare the environmental and economic performances of the Bo2W philosophy with other conventional recycling scenarios. The assessment showed that the performance of the Bo2W scenario is more eco-efficient than mechanical separation scenarios and other local treatment solutions. For equipment containing substantial hazardous substances, it demands the assistance from domestic legislation for mandatory removal and safe handling of such fractions together with proper financing to cover the costs. Experience from Bo2W pilot projects in China and India highlighted key societal factors influencing successful implementation. These include market size, informal competitors, availability of national e-waste legislation, formal take-back systems, financing and trust between industrial players. The Bo2W philosophy can serve as a pragmatic and environmentally responsible transition before establishment of end-processing facilities in developing countries is made feasible. The executive models of Bo2W should be flexibly differentiated for various countries by adjusting to local conditions related to operational scale, level of centralized operations, dismantling depth, combination with mechanical processing and optimized logistics to international end-processors.

[1]  Martin Streicher-Porte,et al.  Informal electronic waste recycling: a sector review with special focus on China. , 2011, Waste management.

[2]  Markus Berger,et al.  Design for Resource Efficiency , 2012 .

[3]  I. Pulford Waste Electrical and Electronic Equipment (WEEE) , 2013 .

[4]  M. Bengtsson,et al.  Chemical hazards associated with treatment of waste electrical and electronic equipment. , 2011, Waste management.

[5]  D Rochat,et al.  INDIA: INCLUDING THE EXISTING INFORMAL SECTOR IN A CLEAN E-WASTE CHANNEL , 2008 .

[6]  Stefan Salhofer,et al.  Assessment of removal of components containing hazardous substances from small WEEE in Austria. , 2011, Journal of hazardous materials.

[7]  F.O. Ongondo,et al.  How are WEEE doing? A global review of the management of electrical and electronic wastes. , 2011, Waste management.

[8]  Oladele Osibanjo,et al.  Sound management of brominated flame retarded (BFR) plastics from electronic wastes : State of the art and options in Nigeria , 2008 .

[9]  Min Qiao,et al.  Identification of ah receptor agonists in soil of E-waste recycling sites from Taizhou area in China. , 2008, Environmental science & technology.

[10]  Gregory Giuliani,et al.  E-waste, the hidden side of IT equipment's manufacturing and use , 2005 .

[11]  F. Renaud,et al.  A review of the environmental fate and effects of hazardous substances released from electrical and electronic equipments during recycling: Examples from China and India , 2010 .

[12]  Caisa Samuelsson,et al.  Metallurgical use of glass fractions from waste electric and electronic equipment (WEEE). , 2010, Waste management.

[13]  J. Gregory,et al.  A Process-Based Model of End-of-Life Electronics Recycling Driving Eco-Efficiency-Informed Decisions , 2006, Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, 2006..

[14]  K Moustakas,et al.  Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus. , 2008, Waste management.

[15]  Jeroen B. Guinee,et al.  Handbook on life cycle assessment operational guide to the ISO standards , 2002 .

[16]  Lifeng Zhang,et al.  Metallurgical recovery of metals from electronic waste: a review. , 2008, Journal of hazardous materials.

[17]  Markus A. Reuter,et al.  Dynamic modelling of E-waste recycling system performance based on product design , 2010 .

[18]  P. P. Sheng,et al.  Recovery of gold from computer circuit board scrap using aqua regia , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[19]  Jaco Huisman,et al.  The QWERTY/EE concept, Quantifying Recyclability and Eco-Efficiency for End-of-Life Treatment of Consumer Electronic Products , 2003 .

[20]  Helmut Rechberger,et al.  Practical handbook of material flow analysis , 2003 .

[21]  Denise Crocce Romano Espinosa,et al.  Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. , 2011, Waste management.

[22]  Oladele Osibanjo,et al.  Global disposal strategies for waste cathode ray tubes , 2011 .

[23]  M. Schluep,et al.  RoHS - regulated substances in mixed plastics from waste electrical and electronic equipment , 2012, 2012 Electronics Goes Green 2012+.

[24]  Gijsbert Korevaar,et al.  Economic conditions for developing large scale WEEE recycling infrastructure based on manual dismantling in China , 2008 .

[25]  P. H. Abelson Waste management. , 1985, Science.

[26]  N. Duzgoren-Aydin,et al.  Sources and trends of environmental mercury emissions in Asia. , 2006, The Science of the total environment.

[27]  Ambuj D. Sagar,et al.  A perspective on industrial ecology and its application to a metals-industry ecosystem , 1997 .

[28]  V. S. Rotter,et al.  Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment , 2009 .

[29]  F. Field,et al.  Process-Based Cost Modeling: Understanding the Economics of Technical Decisions , 2001 .

[30]  C. Hicksa,et al.  The recycling and disposal of electrical and electronic waste in China—legislative and market responses , 2005 .

[31]  Fabrice Mathieux,et al.  ReSICLED: a new Recovery Conscious Design method for complex products based on a multicriteria assessment of the recoverability. , 2008 .

[32]  M. Goedkoop,et al.  The Eco-indicator 99, A damage oriented method for Life Cycle Impact Assessment , 1999 .

[33]  Eiji Hosoda,et al.  International aspects of recycling of electrical and electronic equipment: material circulation in the East Asian region , 2007 .

[34]  R. Kirchain,et al.  A framework for evaluating the economic performance of recycling systems: a case study of North American electronics recycling systems. , 2008, Environmental science & technology.

[35]  O Osibanjo,et al.  The challenge of electronic waste (e-waste) management in developing countries , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[36]  M. Deaves Taking the WEEE [EU waste electrical and electronic equipment directive] , 2003 .

[37]  Casper Boks,et al.  Quotes for environmentally weighted recyclability (QWERTY): Concept of describing product recyclability in terms of environmental value , 2003 .

[38]  Brett H Robinson,et al.  E-waste: an assessment of global production and environmental impacts. , 2009, The Science of the total environment.

[39]  Markus A. Reuter,et al.  Exergy losses during recycling and the resource efficiency of product systems , 2007 .

[40]  Julie M Schoenung,et al.  Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities. , 2010, Waste management.

[41]  A. Manhart International Cooperation for Metal Recycling From Waste Electrical and Electronic Equipment , 2011 .

[42]  Annamalai Subramanian,et al.  Contamination by trace elements at e-waste recycling sites in Bangalore, India. , 2009, Chemosphere.

[43]  Charles W. Schmidt,et al.  Unfair Trade e-Waste in Africa , 2006, Environmental health perspectives.