HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming

[1]  Xin Lin,et al.  Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections , 2017 .

[2]  Hongchao Zhang,et al.  Influences of pulse laser parameters on properties of AISI316L stainless steel thin-walled part by laser material deposition , 2017 .

[3]  A. Basak,et al.  Microstructure of nickel-base superalloy MAR-M247 additively manufactured through scanning laser epitaxy (SLE) , 2017 .

[4]  Xin Lin,et al.  The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy , 2017 .

[5]  A. Firoozrai,et al.  Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades , 2017 .

[6]  Xin Lin,et al.  Effect of heat input on cracking in laser solid formed DZ4125 superalloy , 2016 .

[7]  Xu Cheng,et al.  A new microsegregation model for rapid solidification multicomponent alloys and its application to single-crystal nickel-base superalloys of laser rapid directional solidification , 2016 .

[8]  T. Simpson,et al.  Predicting Coherency Loss of $$ \gamma^{\prime\prime} $$γ″ Precipitates in IN718 Superalloy , 2016 .

[9]  Wang Yujiang,et al.  The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition , 2015 .

[10]  Zemin Wang,et al.  Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication , 2015 .

[11]  Mohammad Jahazi,et al.  Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades , 2015 .

[12]  I. Todd,et al.  Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach , 2015 .

[13]  O. Ojo,et al.  On the development of a new pre-weld thermal treatment procedure for preventing heat-affected zone (HAZ) liquation cracking in nickel-base IN 738 superalloy , 2014 .

[14]  O. Ojo,et al.  Role of filler alloy composition on laser arc hybrid weldability of nickel-base IN738 superalloy , 2014 .

[15]  G. Bi,et al.  Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing , 2014 .

[16]  K. Wegener,et al.  High temperature material properties of IN738LC processed by selective laser melting (SLM) technology , 2013 .

[17]  O. Ojo,et al.  Laser arc hybrid weld microstructure in nickel based IN738 superalloy , 2013 .

[18]  Weidong Huang,et al.  Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy , 2013 .

[19]  F. M. Ghaini,et al.  The liquation cracking behavior of IN738LC superalloy during low power Nd:YAG pulsed laser welding , 2012 .

[20]  John Francis,et al.  Residual stress distributions in a P91 steel-pipe girth weld before and after post weld heat treatment , 2012 .

[21]  Zhe-feng Zhang,et al.  General relationship between strength and hardness , 2011 .

[22]  D. Guo,et al.  Segregation Characteristics of Pulsed Laser Butt Welding of Hastelloy C-276 , 2011 .

[23]  J. Lee,et al.  A Comparative Study of the γ/γ′ Eutectic Evolution During the Solidification of Ni-Base Superalloys , 2011 .

[24]  O. Ojo,et al.  On preventing HAZ cracking in laser welded DS Rene 80 superalloy , 2011 .

[25]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[26]  Weidong Huang,et al.  Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy , 2011 .

[27]  L. Xue,et al.  Process-induced microstructural characteristics of laser consolidated IN-738 superalloy , 2010 .

[28]  O. Ojo,et al.  Analysis of laser beam weldability of Inconel 738 superalloy , 2010 .

[29]  E. Toyserkani,et al.  On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental-numerical investigation , 2009 .

[30]  J. Lippold,et al.  Welding Metallurgy and Weldability of Nickel-Base Alloys , 2009 .

[31]  Huairuo Zhang,et al.  Improvement in Laser Weldability of INCONEL 738 Superalloy through Microstructural Modification , 2009 .

[32]  Weidong Huang,et al.  The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming , 2009 .

[33]  C. Chen,et al.  Induction-assisted laser welding of IN-738 nickel–base superalloy☆ , 2009 .

[34]  M. Waly,et al.  Effect of various heat treatment conditions on microstructure of cast polycrystalline IN738LC alloy , 2008 .

[35]  A. Pineau,et al.  Gamma double prime precipitation kinetic in Alloy 718 , 2008 .

[36]  W. Dudziński,et al.  TEM observation of the heat-affected zone in electron beam welded superalloy Inconel 713C , 2008 .

[37]  O. Ojo,et al.  Heat affected zone liquation cracking in electron beam welded third generation nickel base superalloys , 2008 .

[38]  O. Ojo,et al.  Microstructural Analysis of Laser-Beam-Welded Directionally Solidified INCONEL 738 , 2007 .

[39]  K. Ōgi,et al.  Eta Phase and Boride Formation in Directionally Solidified Ni-Base Superalloy IN792 + Hf , 2007 .

[40]  Xin Lin.  Microstructure Evolution of 316L Stainless Steel During Laser Rapid Forming , 2006 .

[41]  O. Ojo,et al.  Study of the fusion zone and heat-affected zone microstructures in tungsten inert gas-welded INCONEL 738LC superalloy , 2006 .

[42]  K. Zhao,et al.  Directional Coarsening of γ′ Phase Induced by Phase Transformation Stress , 2005 .

[43]  O. Ojo,et al.  On the role of liquated γ′ precipitates in weld heat affected zone microfissuring of a nickel-based superalloy , 2005 .

[44]  O. A. Ojo,et al.  Microstructural study of weld fusion zone of TIG welded IN 738LC nickel-based superalloy , 2004 .

[45]  J. Zhang,et al.  Effect of Zr and B on castability of Ni-based superalloy IN792 , 2004 .

[46]  O. Ojo,et al.  Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy , 2004 .

[47]  Y. Miura,et al.  Loss in coherency and coarsening behavior of Al3Sc precipitates , 2004 .

[48]  Stefan Carlsson,et al.  On the determination of residual stress and strain fields by sharp indentation testing.: Part I: theoretical and numerical analysis , 2001 .

[49]  Subra Suresh,et al.  A new method for estimating residual stresses by instrumented sharp indentation , 1998 .

[50]  T. Clyne,et al.  An analytical model for predicting residual stresses in progressively deposited coatings Part 2: Cylindrical geometry , 1997 .

[51]  Xiao Huang,et al.  The effect of grain boundary segregation of boron in cast alloy 718 on HAZ microfissuring: A sims analysis , 1997 .

[52]  J. W. Park,et al.  Joining of nickel base superalloy single crystals , 1997 .

[53]  B. Radhakrishnan.  Interface controlled precipitate dissolution and constitutional liquation , 1993 .

[54]  W. Kurz,et al.  Fundamentals of Solidification , 1990 .

[55]  A. D. Romig,et al.  An analytical electron microscope investigation of the phase transformations in a simulated heat-affected zone in alloy 800 , 1988, Metallurgical and Materials Transactions A.

[56]  Wilfried Kurz,et al.  Theory of Microstructural Development during Rapid Solidification , 1986 .

[57]  A. Ardell,et al.  The coarsening behavior of the γ′ precipitate in nickel-silicon alloys , 1971 .

[58]  G. Weatherly,et al.  An electron microscope investigation of the interfacial structure of semi-coherent precipitates , 1968 .

[59]  R. Dendievel,et al.  Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting , 2018 .

[60]  C. Arvieu,et al.  An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy , 2010 .

[61]  Surrey Gu,et al.  THE APPLICATION OF CALPHAD CALCULATIONS TO NI-BASED SUPERALLOYS , 2000 .

[62]  B. J. Keene,et al.  Review of data for the surface tension of pure metals , 1993 .

[63]  W. Kurz,et al.  Modeling of microsegregation under rapid solidification conditions , 1990 .

[64]  H. B. Aaron,et al.  Second phase dissolution , 1971 .