Virtual prototyping of mechanical systems with tool mediated haptic feedback

Haptic feedback usually involves two types of stimulation forces: forces that address the touch sense and forces that address the kinesthetic perception. Touch forces have a low intensity and a complex structure since they reflect contact phenomena where friction plays an important role. Therefore, they are quite difficult to simulate. Virtual prototyping with haptic feedback should ideally involve both types of forces, but the integration of the touch feeling makes the simulator very complex. In this paper, we present a novel concept for virtual prototyping in which the touch interaction is separated from the kinesthetic force feedback. This is possible using a prototype that has a real part undertaking the touch interaction and a virtual part that simulate feedback for the kinesthetic forces. In this way, a full haptic interaction with the virtual prototype is established by means of a device that provides a realistic simulation of the product. In order to illustrate the concept, several experiments have been carried out for the case of specific subsystems of a car, which are particularly involved in the driver–car interaction: steering system, clutch pedal and the gearshift. A user test is described in the last part as well as the conclusions of the research.

[1]  Monica Bordegoni,et al.  Haptic technologies for the conceptual and validation phases of product design , 2006, Comput. Graph..

[2]  Antonella De Angeli,et al.  Pleasure versus efficiency in user interfaces: towards an involvement framework , 2002 .

[3]  Fred J.A.M. van Houten,et al.  Haptic Virtual Prototyping for Design and Assessment of Gear-shifts , 2006 .

[4]  John D. Lee,et al.  QUANTITATIVE ANALYSIS OF STEERING ADAPTATION ON A HIGH PERFORMANCE FIXED-BASE DRIVING SIMULATOR , 2004 .

[5]  Hong Qin,et al.  A novel haptics-based interface and sculpting system for physics-based geometric design , 2001, Comput. Aided Des..

[6]  Fumio Yamazaki,et al.  Driving simulator experiment on the moving stability of an automobile under strong crosswind , 2006 .

[7]  Doina Pisla,et al.  Kinematic modelling of a 5-DOF hybrid parallel robot for laparoscopic surgery , 2012, Robotica.

[8]  U. Cugini,et al.  Design Products with your Hands , 2005 .

[9]  Francesco Bella,et al.  Driving simulator for speed research on two-lane rural roads. , 2008, Accident; analysis and prevention.

[10]  Doru Talaba,et al.  Virtual prototyping of a car turn-signal switch using haptic feedback , 2009, Engineering with Computers.

[11]  Joan Savall,et al.  Optimal Cost Haptic Devices for Driving Simulators , 2009 .

[12]  Stefan Larsson,et al.  Development of a method for subjective expert evaluation of the human driving geometry , 2005 .

[13]  Philippe Fuchs,et al.  Applications of Virtual Reality in the manufacturing industry: from design review to ergonomic studies , 2004 .

[14]  Gary E. Burnett,et al.  Ubiquitous computing within cars: designing controls for non-visual use , 2001, Int. J. Hum. Comput. Stud..

[15]  Marcelo Gattass,et al.  Towards the use of cad models in VR applications , 2006, VRCIA '06.

[16]  Massimo Bergamasco,et al.  Fork-lift truck simulator for training in industrial environment , 2005, 2005 IEEE Conference on Emerging Technologies and Factory Automation.

[17]  Yonghua Chen,et al.  On the development of a haptic system for rapid product development , 2005, Comput. Aided Des..

[18]  Daniel Thalmann,et al.  Stepping into virtual reality , 2008 .

[19]  Antonio Frisoli,et al.  A new force-feedback arm exoskeleton for haptic interaction in virtual environments , 2005, First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. World Haptics Conference.

[20]  F. Merienne,et al.  CAD/CAE visualization in virtual environment for automotive industry , 2003 .

[21]  In Lee,et al.  Haptic simulation of refrigerator door , 2012, 2012 IEEE Haptics Symposium (HAPTICS).

[22]  Monica Bordegoni,et al.  Use of interactive Virtual Prototypes to define product design specifications: A pilot study on consumer products , 2011, 2011 IEEE International Symposium on VR Innovation.

[23]  P. Jordan,et al.  Pleasure With Products : Beyond Usability , 2002 .

[24]  H. H. Cheung,et al.  A CAVE-based Multi-Material Virtual Prototyping System , 2006 .

[25]  John M. Hollerbach,et al.  Reality-Based Haptic Force Models of Buttons and Switches , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[26]  Yuan-Shin Lee,et al.  Dexel-based force-torque rendering and volume updating for 5-DOF haptic product prototyping and virtual sculpting , 2004, Comput. Ind..

[27]  Mel Slater,et al.  A Framework for Immersive Virtual Environments (FIVE): Speculations on the Role of Presence in Virtual Environments , 1997, Presence: Teleoperators & Virtual Environments.

[28]  Daniel Thalmann,et al.  Immersive vehicle simulators for prototyping, training and ergonomics , 2003, Proceedings Computer Graphics International 2003.

[29]  Yuan-Shin Lee,et al.  Five-axis pencil-cut planning and virtual prototyping with 5-DOF haptic interface , 2004, Comput. Aided Des..

[30]  T. Butnaru,et al.  Haptic interaction with virtual mechanical systems , 2007 .

[31]  Frédéric Mérienne,et al.  CAD/CAE visualization in virtual environment for automotive industry , 2003, IPT/EGVE.

[32]  Karin Coninx,et al.  Designing a interface for virtual reality and haptic application prototyping: a case study , 2007 .

[33]  David Wallace,et al.  An evaluation of haptic feedback modelling during industrial design practice , 2005 .

[34]  Doina Pisla,et al.  Development of inverse dynamic model for a surgical hybrid parallel robot with equivalent lumped masses , 2012 .