CO2 separation using thin film composite membranes of acid-hydrolyzed PIM-1
暂无分享,去创建一个
P. Budd | S. Kentish | J. M. Luque-Alled | Patricia Gorgojo | C. Scholes | Minghua Yu | A. Foster | Mustafa Alshurafa
[1] P. Budd,et al. Crosslinking of Branched PIM-1 and PIM-Py Membranes for Recovery of Toluene from Dimethyl Sulfoxide by Pervaporation , 2023, ACS applied polymer materials.
[2] P. Budd,et al. Methanol Vapor Retards Aging of PIM-1 Thin Film Composite Membranes in Storage , 2023, ACS macro letters.
[3] G. He,et al. Coordination-driven structure reconstruction in polymer of intrinsic microporosity membranes for efficient propylene/propane separation , 2022, Innovation (Cambridge (Mass.)).
[4] S. Kentish,et al. The impact of water, BTEX compounds and ethylene glycol on the performance of perfluoro(butenyl vinyl ether) based membranes for CO2 capture from natural gas , 2022, Journal of Membrane Science.
[5] Can Wang,et al. Ladder polymers of intrinsic microporosity from superacid-catalyzed Friedel-Crafts polymerization for membrane gas separation , 2022, Journal of Membrane Science.
[6] Chang Soo Lee,et al. In-situ formation of asymmetric thin-film, mixed-matrix membranes with ZIF-8 in dual-functional imidazole-based comb copolymer for high-performance CO2 capture , 2022, Journal of Membrane Science.
[7] Dan Zhao,et al. Induced Polymer Crystallinity in Mixed Matrix Membranes by Metal-Organic Framework Nanosheets for Gas Separation , 2022, Journal of Membrane Science Letters.
[8] Yifu Ding,et al. Effect of Branch Length on the Structural and Separation Properties of Hyperbranched Poly(1,3-dioxolane) , 2021, Macromolecules.
[9] Tai‐Shung Chung,et al. Supramolecular Polymer Network Membranes with Molecular-Sieving Nanocavities for Efficient Pre-Combustion CO2 Capture. , 2021, Small methods.
[10] Jong Gyu Oh,et al. Facile suppression of intensified plasticization in glassy polymer thin films towards scalable composite membranes for propylene/propane separation , 2021, Journal of Membrane Science.
[11] S. Kentish,et al. Gas sorption and diffusion in perfluoro(butenyl vinyl ether) based perfluoropolymeric membranes , 2021, Journal of Membrane Science.
[12] Fan Yang,et al. Post-modification of PIM-1 and simultaneously in situ synthesis of porous polymer networks into PIM-1 matrix to enhance CO2 separation performance , 2021 .
[13] Tae-Hyun Kim,et al. PIM-PI-1 and Poly(ethylene glycol)/Poly(propylene glycol)-Based Mechanically Robust Copolyimide Membranes with High CO2-Selectivity and an Anti-aging Property: A Joint Experimental-Computational Exploration. , 2021, ACS applied materials & interfaces.
[14] Masakoto Kanezashi,et al. Boosting the CO2 capture efficiency through aromatic bridged organosilica membranes , 2021, Journal of Membrane Science.
[15] S. Kentish,et al. Gas separation performance of copolymers of perfluoro(butenyl vinyl ether) and perfluoro(2,2-dimethyl-1,3-dioxole) , 2021 .
[16] Yatao Zhang,et al. Amidoxime modified polymers of intrinsic microporosity/alginate composite hydrogel beads for efficient adsorption of cationic dyes from aqueous solution. , 2021, Journal of colloid and interface science.
[17] Xiaohua Ma,et al. Facile synthesis of Bi-functionalized intrinsic microporous polymer with fully carbon backbone for gas separation application , 2021, Separation and Purification Technology.
[18] Joshua S. McNally,et al. Molecular design and fabrication of PIM-1/polyphosphazene blend membranes with high performance for CO2/N2 separation , 2021 .
[19] P. Budd,et al. Influence of Polymer Topology on Gas Separation Membrane Performance of the Polymer of Intrinsic Microporosity PIM-Py , 2021 .
[20] W. Ho,et al. Polymeric membranes for CO2 separation and capture , 2021 .
[21] O. Farha,et al. Postsynthetically Modified Polymers of Intrinsic Microporosity (PIMs) for Capturing Toxic Gases. , 2021, ACS applied materials & interfaces.
[22] C. Doherty,et al. Leveraging free volume manipulation to improve membrane separation performance of amine-functionalized PIM-1. , 2020, Angewandte Chemie.
[23] Rong Wu,et al. Synthesis of high-performance Co-based ZIF-67 membrane for H2 separation by using cobalt ions chelated PIM-1 as interface layer , 2020 .
[24] P. Webley,et al. High-throughput CO2 capture using PIM-1@MOF based thin film composite membranes , 2020 .
[25] P. Budd,et al. Mitigation of physical aging with mixed matrix membranes based on crosslinked PIM-1 fillers and PIM-1. , 2020, ACS applied materials & interfaces.
[26] P. Budd,et al. Recovery of free volume in PIM-1 membranes through alcohol vapor treatment , 2020, Frontiers of Chemical Science and Engineering.
[27] C. Doherty,et al. Facile and Time-Efficient Carboxylic Acid Functionalization of PIM-1: Effect on Molecular Packing and Gas Separation Performance , 2020 .
[28] Omid T. Qazvini,et al. Effective enhancement of selectivities and capacities for CO 2 over CH 4 and N 2 of polymers of intrinsic microporosity via postsynthesis metalation , 2020 .
[29] Bekir Satilmis. Amidoxime Modified Polymers of Intrinsic Microporosity (PIM-1); A Versatile Adsorbent for Efficient Removal of Charged Dyes; Equilibrium, Kinetic and Thermodynamic Studies , 2020, Journal of Polymers and the Environment.
[30] P. Budd,et al. Understanding the Topology of the Polymer of Intrinsic Microporosity PIM-1: Cyclics, Tadpoles, and Network Structures and Their Impact on Membrane Performance , 2020 .
[31] J. Lai,et al. A review of polymeric composite membranes for gas separation and energy production , 2019, Progress in Polymer Science.
[32] M. Ferrari,et al. Redefining the Robeson upper bounds for CO2/CH4 and CO2/N2 separations using a series of ultrapermeable benzotriptycene-based polymers of intrinsic microporosity , 2019, Energy & Environmental Science.
[33] P. Webley,et al. Postcombustion Carbon Capture Using Thin-Film Composite Membranes. , 2019, Accounts of chemical research.
[34] Yufeng Zhang,et al. Hierarchical Porous and Zinc-Ion-Crosslinked PIM-1 Nanocomposite as a CO2 Cycloaddition Catalyst with High Efficiency. , 2019, ChemSusChem.
[35] Gongpin Liu,et al. High‐Performance CO2 Capture through Polymer‐Based Ultrathin Membranes , 2019, Advanced Functional Materials.
[36] P. Budd,et al. Synergistic enhancement of gas selectivity in thin film composite membranes of PIM-1 , 2019, Journal of Materials Chemistry A.
[37] P. Webley,et al. Recent progress on fabrication methods of polymeric thin film gas separation membranes for CO2 capture , 2019, Journal of Membrane Science.
[38] M. Guiver,et al. Metal-induced ordered microporous polymers for fabricating large-area gas separation membranes , 2018, Nature Materials.
[39] P. Webley,et al. Ultrathin Metal-Organic Framework Nanosheets as a Gutter Layer for Flexible Composite Gas Separation Membranes. , 2018, ACS nano.
[40] P. Budd,et al. Ultrahigh-permeance PIM-1 based thin film nanocomposite membranes on PAN supports for CO2 separation , 2018, Journal of Membrane Science.
[41] A. Livingston,et al. Roll-to-roll dip coating of three different PIMs for Organic Solvent Nanofiltration , 2018, Journal of Membrane Science.
[42] P. Thomas,et al. Effective Conversion of Amide to Carboxylic Acid on Polymers of Intrinsic Microporosity (PIM-1) with Nitrous Acid , 2018, Membranes.
[43] I. Pinnau,et al. High-Pressure CO2 Sorption in Polymers of Intrinsic Microporosity under Ultrathin Film Confinement. , 2018, ACS applied materials & interfaces.
[44] Youngjae Yoo,et al. Highly Carboxylate-Functionalized Polymers of Intrinsic Microporosity for CO2-Selective Polymer Membranes , 2017 .
[45] B. Freeman,et al. Physical aging, CO2 sorption and plasticization in thin films of polymer with intrinsic microporosity (PIM-1) , 2017 .
[46] Christopher R. Mason,et al. Effect of physical aging on the gas transport and sorption in PIM-1 membranes , 2017 .
[47] I. Leung,et al. A Critical Update on the Synthesis of Carboxylated Polymers of Intrinsic Microporosity (C-PIMs) , 2017 .
[48] Liling Zhang,et al. Effects of hydrolyzed PIM-1 in polyimide-based membranes on C2–C4 alcohols dehydration via pervaporation , 2017 .
[49] G. Qiao,et al. CO2 separation using surface-functionalized SiO2 nanoparticles incorporated ultra-thin film composite mixed matrix membranes for post-combustion carbon capture , 2016 .
[50] J. Lai,et al. Metal ion modified PIM-1 and its application for propylene/propane separation , 2016 .
[51] X. Tan,et al. High performance post-modified polymers of intrinsic microporosity (PIM-1) membranes based on multivalent metal ions for gas separation , 2016 .
[52] P. Budd,et al. Enhanced gas separation factors of microporous polymer constrained in the channels of anodic alumina membranes , 2016, Scientific Reports.
[53] G. Qiao,et al. A novel cross-linked nano-coating for carbon dioxide capture , 2016 .
[54] Q. Zhang,et al. Towards enhanced CO2 selectivity of the PIM-1 membrane by blending with polyethylene glycol , 2015 .
[55] Z. Bao,et al. Chiral polymers of intrinsic microporosity: selective membrane permeation of enantiomers. , 2015, Angewandte Chemie.
[56] I. Pinnau,et al. Physical Aging, Plasticization and Their Effects on Gas Permeation in "Rigid" Polymers of Intrinsic Microporosity , 2015 .
[57] B. Freeman,et al. Gas permeation in thin films of “high free-volume” glassy perfluoropolymers: Part II. CO2 plasticization and sorption , 2015 .
[58] P. Budd,et al. Base-catalysed hydrolysis of PIM-1: amide versus carboxylate formation , 2014 .
[59] A. Cheetham,et al. Controlled thermal oxidative crosslinking of polymers of intrinsic microporosity towards tunable molecular sieve membranes , 2014, Nature Communications.
[60] Y. Tong,et al. Molecular interaction, gas transport properties and plasticization behavior of cPIM-1/Torlon blend membranes , 2014 .
[61] Pei Li,et al. Temperature dependence of gas sorption and permeation in PIM-1 , 2014 .
[62] P. Budd,et al. Aging and Free Volume in a Polymer of Intrinsic Microporosity (PIM-1) , 2012 .
[63] E. Hertwich,et al. CO2 emissions from biomass combustion for bioenergy: atmospheric decay and contribution to global warming , 2011 .
[64] Haiqing Lin,et al. Power plant post-combustion carbon dioxide capture: An opportunity for membranes , 2010 .
[65] Neil B. McKeown,et al. Exploitation of Intrinsic Microporosity in Polymer-Based Materials , 2010 .
[66] Jingshe Song,et al. High-Performance Carboxylated Polymers of Intrinsic Microporosity (PIMs) with Tunable Gas Transport Properties† , 2009 .
[67] H. Damon Matthews,et al. The proportionality of global warming to cumulative carbon emissions , 2009, Nature.
[68] L. Robeson,et al. The upper bound revisited , 2008 .
[69] N. Du,et al. Linear High Molecular Weight Ladder Polymer via Fast Polycondensation of 5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane with 1,4‐Dicyanotetrafluorobenzene , 2008 .
[70] K. Nagai,et al. Influence of methanol conditioning and physical aging on carbon spin-lattice relaxation times of poly(1-trimethylsilyl-1-propyne) , 2004 .
[71] Saad Makhseed,et al. Polymers of intrinsic microporosity (PIMs): robust, solution-processable, organic nanoporous materials. , 2004, Chemical communications.
[72] Matthias Wessling,et al. Accelerated plasticization of thin-film composite membranes used in gas separation , 2001 .
[73] P. Budd,et al. Thin film nanocomposite membranes of superglassy PIM-1 and amine-functionalised 2D fillers for gas separation , 2022, Journal of Materials Chemistry A.
[74] P. Budd,et al. Importance of small loops within PIM-1 topology on gas separation selectivity in thin film composite membranes , 2021, Journal of Materials Chemistry A.
[75] Kelvin O. Yoro,et al. CO2 emission sources, greenhouse gases, and the global warming effect , 2020 .