De-Ironing of Aluminium Alloy Melts by High Shear Melt Conditioning Technology: An Overview

The main problem of recycling aluminium scrap is the gradual accumulation of impurities, especially iron, which tend to form undesired intermetallic compounds that affect the integrity and the mechanical performance of the castings. In this paper, we aim to provide an overview on the topic of iron removal from aluminium melts through primary intermetallic precipitation and the progress made during the LiME Hub project to understand the process and to develop a more efficient procedure. We cover both thermodynamic analysis and experimental validation. We found that high shear melt conditioning technology enhances the typically slow nucleation and growth of the dense primary intermetallics, speeding up their sedimentation and allowing a faster removal of Fe from the melt by simple gravity sedimentation. It also promotes the formation of smaller and more compact Fe-rich intermetallics, allowing an increased volume fraction recovery and mitigating their effect of being present in the final castings. The technology is not limited to batch processing, with a 90% efficiency, but can also be applied to continuous melt treatment of aluminium scrap, with currently 60% efficiency, and could be combined with other solid–liquid separation techniques to increase the purification efficiency even more.

[1]  G. Gyarmati,et al.  Interactions of primary intermetallic compound particles and double oxide films in liquid aluminum alloys , 2022, Intermetallics.

[2]  A. Luo,et al.  A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications , 2022, Metallurgical and Materials Transactions A.

[3]  Weiweng Zhang,et al.  Study of the evolution mechanisms of Fe-rich phases in Al-Si-Fe alloys with Mn modification using synchrotron X-ray imaging , 2022, Journal of Alloys and Compounds.

[4]  J. Patel,et al.  High-Shear De-Gassing and De-Ironing of an Aluminum Casting Alloy Made Directly from Aluminum End-of-Life Vehicle Scrap , 2021, Recycling.

[5]  Matthew D. Wilson,et al.  Nucleation bursts of primary intermetallic crystals in a liquid Al alloy studied using in situ synchrotron X-ray radiography , 2021, Acta Materialia.

[6]  M. Chmielewski,et al.  Phase Structure Evolution of the Fe-Al Arc-Sprayed Coating Stimulated by Annealing , 2021, Materials.

[7]  Weiweng Zhang,et al.  Effect of Mn/Fe ratio on Fe removal efficiency and tensile ductility of an Al–7.0Si–2.4Fe alloy , 2021, Journal of Materials Research.

[8]  Z. Fan,et al.  Improved degassing efficiency and mechanical properties of A356 aluminium alloy castings by high shear melt conditioning (HSMC) technology , 2021, Journal of Materials Processing Technology.

[9]  A. Weidner,et al.  Impact of melt conditioning and filtration on iron-rich β phase in AlSi9Cu3 and its fatigue life studied by μCT , 2021 .

[10]  Z. Fan,et al.  Fe-Rich Intermetallic Formation and Mechanical Properties of Recycled AA6111 Alloy Strips Produced by Melt Conditioning Twin Roll Casting , 2020, JOM.

[11]  Z. Fan,et al.  Numerical Assessment of In-Line Rotor–Stator Mixers in High-Shear Melt Conditioning (HSMC) Technology , 2020, JOM.

[12]  A. Luo,et al.  A Formation Map of Iron-Containing Intermetallic Phases in Recycled Cast Aluminum Alloys , 2019, Metallurgical and Materials Transactions A.

[13]  I. Chang,et al.  Solidification processing of scrap Al-alloys containing high levels of Fe , 2019, IOP Conference Series: Materials Science and Engineering.

[14]  B. Friedrich,et al.  Purification of Aluminium Cast Alloy Melts through Precipitation of Fe-Containing Intermetallic Compounds , 2018, Metals.

[15]  Zhancheng Guo,et al.  Removal of Tramp Elements within 7075 Alloy by Super-Gravity Aided Rheorefining Method , 2018, Metals.

[16]  D. Eskin,et al.  Validation of the Physical Simulations of a Stirred Molten Metal Using Particle Image Velocimetry Data , 2018 .

[17]  Z. Fan,et al.  Formation of the Fe-Containing Intermetallic Compounds during Solidification of Al-5Mg-2Si-0.7Mn-1.1Fe Alloy , 2018, Metallurgical and Materials Transactions A.

[18]  A. Håkansson.  Rotor-Stator Mixers: From Batch to Continuous Mode of Operation—A Review , 2018 .

[19]  R. Mathiesen,et al.  In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy , 2017 .

[20]  M. Tong,et al.  Identification of key liquid metal flow features in the physical conditioning of molten aluminium alloy with high shear processing , 2017 .

[21]  Agnieszka Dybalska,et al.  Evaluation of Shearing Time Sufficient for Effective Liquid Metal Processing , 2017 .

[22]  M. Tong,et al.  The Scale-Up of High Shear Processing for the Purification of Recycled Molten Scrap Aluminium Alloy: Key Features of Fluid Flow , 2017 .

[23]  F. Gao,et al.  Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys , 2016 .

[24]  C. B. Basak,et al.  Morphological changes and segregation of β-Al9Fe2Si2 phase: A perspective from better recyclability of cast Al-Si alloys , 2016 .

[25]  Yimeng Sun,et al.  Effect of Mn and Fe on the Formation of Fe- and Mn-Rich Intermetallics in Al–5Mg–Mn Alloys Solidified Under Near-Rapid Cooling , 2016, Materials.

[26]  M. Tong,et al.  Computational prediction of the refinement of oxide agglomerates in a physical conditioning process for molten aluminium alloy , 2015 .

[27]  S. Ji,et al.  Formation and sedimentation of Fe-rich intermetallics in Al–Si–Cu–Fe alloy , 2015 .

[28]  A. Fabrizi,et al.  Evolution of sludge particles in secondary die-cast aluminum alloys as function of Fe, Mn and Cr contents , 2015 .

[29]  F. Gao,et al.  Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys , 2013 .

[30]  Jun Wang,et al.  Effects of Electroslag Refining on Removal of Iron Impurity and Alumina Inclusions from Aluminum , 2012 .

[31]  Lifeng Zhang,et al.  Removal of Iron From Aluminum: A Review , 2012 .

[32]  Y. Wang,et al.  Effect of intensive melt shearing on the formation of Fe-containing intermetallics in LM24 Al-alloy , 2012 .

[33]  Z. Fan,et al.  A New Technology for Treating Liquid Metals with Intensive Melt Shearing , 2011 .

[34]  Lifeng Zhang,et al.  CURRENT TECHNOLOGIES FOR THE REMOVAL OF IRON FROM ALUMINUM ALLOYS , 2011 .

[35]  Z. Fan,et al.  Mechanisms of grain refinement by intensive shearing of AZ91 alloy melt , 2010 .

[36]  Baode Sun,et al.  Effects of Na2B4O7 on the elimination of iron from aluminum melt , 2007 .

[37]  D. Espinosa,et al.  Removal of Iron from Molten Recycled Aluminum through Intermediate Phase Filtration , 2006 .

[38]  Subodh K. Das.  Designing Aluminium Alloys for a Recycling Friendly World , 2006 .

[39]  F. Samuel,et al.  Nucleation of Fe-intermetallic phases in the Al-Si-Fe alloys , 2005 .

[40]  S. G. Shabestari,et al.  The effect of iron and manganese on the formation of intermetallic compounds in aluminum–silicon alloys , 2004 .

[41]  X. Cao,et al.  The solidification characteristics of Fe-rich intermetallics in Al-11.5Si-0.4Mg cast alloys , 2004 .

[42]  N. Saunders,et al.  Effect of iron and manganese contents on convection-free precipitation and sedimentation of primary α-Al(FeMn)Si phase in liquid Al-11.5Si-0.4Mg alloy , 2004 .

[43]  M. Mehrvar,et al.  INCLUSION REMOVAL IN A TUNDISH BY GAS BUBBLING , 2004 .

[44]  X. Cao,et al.  The nucleation of Fe-Rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys , 2003 .

[45]  F. Samuel,et al.  Iron intermetallic phases in the Al corner of the Al-Si-Fe system , 2003 .

[46]  Fan Zhang,et al.  The PANDAT software package and its applications , 2002 .

[47]  X. Cao,et al.  Precipitation of primary intermetallic compounds in liquid Al 11.5Si 0.4Mg alloy , 2000 .

[48]  弘美 松原,et al.  凝固中に遠心力を作用させた2%Feを含むAl–11%Si合金のマクロ偏析 , 1998 .

[49]  D. Eskin,et al.  Fractional Solidification for Purification of Recycled Aluminium Alloys , 2020 .

[50]  K. Nogita,et al.  Al8Mn5 Particle Settling and Interactions with Oxide Films in Liquid AZ91 Magnesium Alloys , 2019, JOM.

[51]  D. Eskin,et al.  Optimal Stator Design for Oxide Films Shearing Found by Physical Modelling , 2019, Materials Processing Fundamentals 2019.

[52]  A. Mandal,et al.  Recycling and Downstream Processing of Aluminium Alloys for Automotive Applications , 2019 .

[53]  Z. Fan,et al.  MULTI-PURPOSE HIGH SHEAR MELT CONDITIONING TECHNOLOGY FOR EFFECTIVE MELT QUALITY AND FOR RECYCLING OF Al-ALLOY SCRAP , 2018 .

[54]  Z. Fan,et al.  Advanced Casting Technologies Using High Shear Melt Conditioning , 2018 .

[55]  Diana Bohm.  Light Alloys Metallurgy Of The Light Metals , 2016 .

[56]  A. Fabrizi,et al.  Precipitation of primary Fe-rich compounds in secondary AlSi9Cu3(Fe) alloys , 2015, Journal of Thermal Analysis and Calorimetry.

[57]  M. Castro-Román,et al.  Nucleation of Fe-Rich Intermetallic Phases on α-Al 2 O 3 Oxide Films in Al-Si Alloys , 2015 .

[58]  E. Olivetti,et al.  Improving aluminum recycling: A survey of sorting and impurity removal technologies , 2012 .

[59]  Sun Bao-de.  Electromagnetic separation of primary iron-rich phases from aluminum-silicon melt , 2003 .

[60]  M. Sukiennik,et al.  A kinetic study on the nucleation and growth of the Al8FeMnSi2 intermetallic compound for aluminum scrap purification , 1998 .