The saturated zone at Yucca Mountain: an overview of the characterization and assessment of the saturated zone as a barrier to potential radionuclide migration.

The US Department of Energy is pursuing Yucca Mountain, Nevada, for the development of a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste, if the repository is able to meet applicable radiation protection standards established by the US Nuclear Regulatory Commission and the US Environmental Protection Agency (EPA). Effective performance of such a repository would rely on a number of natural and engineered barriers to isolate radioactive waste from the accessible environment. Groundwater beneath Yucca Mountain is the primary medium through which most radionuclides might move away from the potential repository. The saturated zone (SZ) system is expected to act as a natural barrier to this possible movement of radionuclides both by delaying their transport and by reducing their concentration before they reach the accessible environment. Information obtained from Yucca Mountain Site Characterization Project activities is used to estimate groundwater flow rates through the site-scale SZ flow and transport model area and to constrain general conceptual models of groundwater flow in the site-scale area. The site-scale conceptual model is a synthesis of what is known about flow and transport processes at the scale required for total system performance assessment of the site. This knowledge builds on and is consistent with knowledge that has accumulated at the regional scale but is more detailed because more data are available at the site-scale level. The mathematical basis of the site-scale model and the associated numerical approaches are designed to assist in quantifying the uncertainty in the permeability of rocks in the geologic framework model and to represent accurately the flow and transport processes included in the site-scale conceptual model. Confidence in the results of the mathematical model was obtained by comparing calculated to observed hydraulic heads, estimated to measured permeabilities, and lateral flow rates calculated by the site-scale model to those calculated by the regional-scale flow model. In addition, it was confirmed that the flow paths leaving the region of the potential repository are consistent with those inferred from gradients of measured head and those independently inferred from water-chemistry data. The general approach of the site-scale SZ flow and transport model analysis is to calculate unit breakthrough curves for radionuclides at the interface between the SZ and the biosphere using the three-dimensional site-scale SZ flow and transport model. Uncertainties are explicitly incorporated into the site-scale SZ flow and transport abstractions through key parameters and conceptual models.

[1]  P. Tucci,et al.  Water-Level Data Analysis for the Saturated Zone Site-Scale Flow and Transport Model , 2001 .

[2]  William Thordarson,et al.  Hydrogeologic and hydrochemical framework, south-central Great Basin, Nevada-California, with special reference to the Nevada Test Site , 1975 .

[3]  R. W. Craig,et al.  Geohydrology of rocks penetrated by test well USW H-6, Yucca Mountain, Nye County, Nevada , 1991 .

[4]  P. Reimus,et al.  Testing and parameterizing a conceptual solute transport model in saturated fractured tuff using sorbing and nonsorbing tracers in cross-hole tracer tests. , 2003, Journal of contaminant hydrology.

[5]  T. Miller,et al.  Hydrogeologic Framework Model for the Saturated Zone Site Scale flow and Transport Model , 2004 .

[6]  A. Geldon,et al.  Analysis of a multiple-well interference test in Miocene tuffaceous rocks at the C-Hole complex, May--June 1995, Yucca Mountain, Nye County, Nevada , 1998 .

[7]  G. Bodvarsson,et al.  Overview of scientific investigations at Yucca Mountain—the potential repository for high-level nuclear waste , 1999 .

[8]  J. R. Erickson,et al.  Identification and characterization of hydrologic properties of fractured tuff using hydraulic and tracer tests, test well USW H-4, Yucca Mountain, Nye County, Nevada , 1985 .

[9]  B. Robinson,et al.  Summary of the Models and Methods for the FEHM Application-A Finite-Element Heat- and Mass-Transfer Code , 1997 .

[10]  G. A. Zyvoloski.  Calibration of the Site-Scale Saturated Zone Flow Model , 2001 .

[11]  B. Robinson,et al.  The site-scale saturated zone flow model for Yucca Mountain: calibration of different conceptual models and their impact on flow paths. , 2003, Journal of contaminant hydrology.

[12]  S. James.  Recharge and Lateral Groundwater Flow Boundary Conditions for the Saturated Zone Site-Scale Flow and Transport Model , 2004 .

[13]  D. H. Lobmeyer.  Geohydrology of rocks penetrated by test well USW G-4, Yucca Mountain, Nye County, Nevada , 1986 .

[14]  Bruce A. Robinson,et al.  User`s manual for the FEHM application -- A finite-element heat- and mass-transfer code , 1997 .

[15]  C. C. Faunt,et al.  Status of understanding of the saturated-zone ground-water flow system at Yucca Mountain, Nevada, as of 1995 , 1996 .

[16]  C. Savard.  Estimated ground-water recharge from streamflow in Fortymile Wash near Yucca Mountain, Nevada , 1998 .

[17]  G. Eaton,et al.  Results and interpretation of preliminary aquifer tests in boreholes UE-25c #1, UE-25c #2, and UE-25c #3, Yucca Mountain, Nye County, Nevada , 1996 .

[18]  R. K. Blankennagel,et al.  Geohydrology of the eastern part of Pahute Mesa, Nevada Test Site, Nye County, Nevada , 1973 .

[19]  B. Robinson,et al.  Radionuclide transport simulation and uncertainty analyses with the saturated-zone site-scale model at Yucca Mountain, Nevada. , 2003, Journal of contaminant hydrology.

[20]  Mary C. Hill,et al.  Hydrogeologic evaluation and numerical simulation of the Death Valley regional ground-water flow system, Nevada and California , 1997 .