The HORSE Project: The Application of Business Process Management for Flexibility in Smart Manufacturing

Several high-tech manufacturing technologies are emerging to meet the demand for mass customized products. These technologies include configurable robots, augmented reality and the Internet-of-Things. Manufacturing enterprises can leverage these new technologies to pursue increased flexibility, i.e., the ability to perform a larger variety of activities within a shorter time. However, the flexibility offered by these new technologies is not fully exploited, because current operations management techniques are not dynamic enough to support high variability and frequent change. The HORSE Project investigated several of the new technologies to find novel ways to improve flexibility, as part of the Horizon 2020 research and innovation program. The purpose of the project was to develop a system, integrating these new technologies, to support efficient and flexible manufacturing. This article presents the core result of the project: a reference architecture for a manufacturing operations management system. It is based on the application and extension of business process management (BPM) to manage dynamic manufacturing processes. It is argued that BPM can complement current operations management techniques by acting as an orchestrator in manufacturing processes augmented by smart technologies. Building on well-known information systems' architecting frameworks, design science research is performed to determine how BPM can be applied and adapted in smart manufacturing operations. The resulting reference architecture is realized in a concrete HORSE system and deployed and evaluated in ten practical cases, of which one is discussed in detail. It is shown that the developed system can flexibly orchestrate the manufacturing process through vertical control of all agents, and dynamic allocation of agents in the manufacturing process. Based on that, we conclude that BPM can be applied to overcome some of the obstacles toward increased flexibility and smart manufacturing.

[1]  George Chryssolouris,et al.  Manufacturing Systems: Theory and Practice , 1992 .

[2]  Jochen De Weerdt,et al.  Process Mining for the multi-faceted analysis of business processes - A case study in a financial services organization , 2013, Comput. Ind..

[3]  Paul W. P. J. Grefen,et al.  A Method to Enable Ability-Based Human Resource Allocation in Business Process Management Systems , 2018, PoEM.

[4]  Lei Ren,et al.  Cloud manufacturing: a new manufacturing paradigm , 2014, Enterp. Inf. Syst..

[5]  Jörg Becker,et al.  Towards a Methodology and a Tool for Modeling Clinical Pathways , 2015, EUSPN/ICTH.

[6]  Paul Grefen.  Beyond E-Business: Towards networked structures , 2015 .

[7]  Arturo Molina,et al.  Enterprise integration and interoperability in manufacturing systems: Trends and issues , 2008, Comput. Ind..

[8]  Paul Grefen,et al.  Smart Hybrid Manufacturing Control Using Cloud Computing and the Internet-of-Things , 2018, Machines.

[9]  Herman Bruyninckx,et al.  Open robot control software: the OROCOS project , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[10]  Núbia Gabriela Pereira Carvalho,et al.  Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing , 2018 .

[11]  Paul W. P. J. Grefen,et al.  Co-location Specification for IoT-Aware Collaborative Business Processes , 2019, CAiSE Forum.

[12]  Paul Grefen,et al.  Architecture design of the HORSE hybrid manufacturing process control system , 2016 .

[13]  Mathias Schmitt,et al.  Towards Industry 4.0 - Standardization as the crucial challenge for highly modular, multi-vendor production systems , 2015 .

[14]  Rainer von Ammon.  Event-Driven Business Process Management , 2009, Encyclopedia of Database Systems.

[15]  Pieter Van Gorp,et al.  Towards Generic MDE Support for Extracting Purpose-Specific Healthcare Models from Annotated, Unstructured Texts , 2012, FHIES.

[16]  Klaus Turowski,et al.  A Perspective on Industry 4.0: From Challenges to Opportunities in Production Systems , 2016, IoTBD.

[17]  Matthias Neubauer,et al.  Subject-Oriented BPM as the Glue for Integrating Enterprise Processes in Smart Factories , 2015, OTM Workshops.

[18]  Rik Eshuis,et al.  Dynamic business network process management in instant virtual enterprises , 2009, Comput. Ind..

[19]  Florian Heinemann,et al.  Cross-Functional Integration of R&D, Marketing, and Manufacturing in Radical and Incremental Product Innovations and Its Effects on Project Effectiveness and Efficiency , 2011 .

[20]  Udo Kannengiesser,et al.  Towards Agent-Based Smart Factories: A Subject-Oriented Modeling Approach , 2013, 2013 IEEE/WIC/ACM International Joint Conferences on Web Intelligence (WI) and Intelligent Agent Technologies (IAT).

[21]  Paul W. P. J. Grefen,et al.  The Case for Unified Process Management in Smart Manufacturing , 2018, 2018 IEEE 22nd International Enterprise Distributed Object Computing Conference (EDOC).

[22]  Donald Gerwin,et al.  An agenda for research on the flexibility of manufacturing processes , 1987 .

[23]  Paul W. P. J. Grefen,et al.  A Software Architecture for Transportation Planning and Monitoring in a Collaborative Network , 2015, PRO-VE.

[24]  Fred D. Davis.  Perceived Usefulness, Perceived Ease of Use, and User Acceptance of Information Technology , 1989, MIS Q..

[25]  Rajeev Sawhney,et al.  Interplay between uncertainty and flexibility across the value-chain: Towards a transformation model of manufacturing flexibility , 2006 .

[26]  Paul Grefen,et al.  The HORSE project: IoT and cloud solutions for dynamic manufacturing processes , 2018, ESOCC 2018.

[27]  Ying Liu,et al.  A categorical framework of manufacturing for industry 4.0 and beyond , 2016 .

[28]  Yoram Koren,et al.  Reconfigurable machine tools , 2001 .

[29]  Katherine C. Morris,et al.  Current Standards Landscape for Smart Manufacturing Systems , 2016 .

[30]  Marek Kowalkiewicz,et al.  Weak Dependencies in Business Process Models , 2008, BIS.

[31]  George Q. Huang,et al.  IoT-based real-time production logistics synchronization system under smart cloud manufacturing , 2016 .

[32]  Birgit Vogel-Heuser,et al.  Towards a Formal Specification Framework for Manufacturing Execution Systems , 2012, IEEE Transactions on Industrial Informatics.

[33]  René Peinl,et al.  BPMN and DMN for Easy Customizing of Manufacturing Execution Systems , 2019, Business Process Management Workshops.

[34]  Gwo-Hshiung Tzeng,et al.  Multi-criteria task assignment in workflow management systems , 2003, 36th Annual Hawaii International Conference on System Sciences, 2003. Proceedings of the.

[35]  Charlotta Johnsson,et al.  Towards a seamless integration between process modeling descriptions at business and production levels: work in progress , 2012, Journal of Intelligent Manufacturing.

[36]  Alan R. Hevner,et al.  POSITIONING AND PRESENTING DESIGN SCIENCE RESEARCH FOR MAXIMUM IMPACT 1 , 2013 .

[37]  Matthias Neubauer,et al.  S-BPM in the Production Industry , 2017 .

[38]  Paul Grefen,et al.  Developing a cyber-physical system for hybrid manufacturing in an internet-of-things context , 2018, IoT 2018.

[39]  Yoram Koren,et al.  Design of reconfigurable manufacturing systems , 2010 .

[40]  Steen Brahe,et al.  BPM on Top of SOA: Experiences from the Financial Industry , 2007, BPM.

[41]  Peter Loos,et al.  Event-Driven Business Process Management: where are we now?: A comprehensive synthesis and analysis of literature , 2014, Bus. Process. Manag. J..

[42]  Antonio Padovano,et al.  Smart operators in industry 4.0: A human-centered approach to enhance operators' capabilities and competencies within the new smart factory context , 2017, Comput. Ind. Eng..

[43]  Paul W. P. J. Grefen,et al.  Supporting Hybrid Manufacturing: Bringing Process and Human/Robot Control to the Cloud (Short Paper) , 2016, 2016 5th IEEE International Conference on Cloud Networking (Cloudnet).

[44]  Jacob Lohmer,et al.  Realizing the Full Potential of Robotic Process Automation Through a Combination with BPM , 2019 .

[45]  J. Lindley,et al.  The hidden financial costs of ERP software , 2008 .

[46]  Steven A. Moore,et al.  Philosophy and design: From engineering to architecture , 2008 .

[47]  Debra Russell,et al.  Designing a research project , 2011 .

[48]  KAOUTAR DOUAIOUI,et al.  The interaction between industry 4.0 and smart logistics: concepts and perspectives , 2018, 2018 International Colloquium on Logistics and Supply Chain Management (LOGISTIQUA).

[49]  I. ClintHeyer.  Human-Robot Interaction and Future Industrial Robotics Applications , 2010 .

[50]  Jiafu Wan,et al.  Implementing Smart Factory of Industrie 4.0: An Outlook , 2016, Int. J. Distributed Sens. Networks.

[51]  Yi Wang,et al.  Industry 4.0: a way from mass customization to mass personalization production , 2017 .

[52]  W.M.P. van der Aalst,et al.  Business Process Management: A Comprehensive Survey , 2013 .

[53]  Manfred Reichert,et al.  What BPM Technology Can Do for Healthcare Process Support , 2011, AIME.

[54]  Parag Vichare,et al.  Strategic advantages of interoperability for global manufacturing using CNC technology , 2008 .

[55]  F. Jovane,et al.  Reconfigurable Manufacturing Systems , 1999 .

[56]  David S. Cochran,et al.  Manufacturing System Design , 1998 .

[57]  Richard H. Weston,et al.  The complementary use of IDEF and UML modelling approaches , 2003, Comput. Ind..

[58]  Antti Tenhiälä,et al.  Performance effects of using an ERP system for manufacturing planning and control under dynamic market requirements , 2015 .

[59]  Hajo A. Reijers,et al.  Workflow for Healthcare: A Methodology for Realizing Flexible Medical Treatment Processes , 2009, Business Process Management Workshops.

[60]  Hoda A. ElMaraghy,et al.  Flexible and reconfigurable manufacturing systems paradigms , 2005 .

[61]  John C. Mankins,et al.  Technology readiness assessments: A retrospective , 2009 .

[62]  Jay Lee.  Smart Factory Systems , 2015, Informatik-Spektrum.

[63]  Werner Esswein,et al.  BPMN4CP: Design and implementation of a BPMN extension for clinical pathways , 2014, 2014 IEEE International Conference on Bioinformatics and Biomedicine (BIBM).

[64]  Ruchi Mishra,et al.  Manufacturing Flexibility Research: A Review of Literature and Agenda for Future Research , 2014 .

[65]  Steven D. Eppinger,et al.  Technology readiness levels at 40: A study of state-of-the-art use, challenges, and opportunities , 2015, 2015 Portland International Conference on Management of Engineering and Technology (PICMET).

[66]  Gonzalo Mejia,et al.  Applications of resource assignment and scheduling with Petri Nets and heuristic search , 2010, Ann. Oper. Res..

[67]  Antonio García-Domínguez,et al.  Defining a methodology to design and implement business process models in BPMN according to the standard ANSI/ISA-95 in a manufacturing enterprise , 2013 .

[68]  Dieter Fensel,et al.  Semantic business process management: a vision towards using semantic Web services for business process management , 2005, IEEE International Conference on e-Business Engineering (ICEBE'05).

[69]  Sachin S. Kamble,et al.  Sustainable Industry 4.0 framework: A systematic literature review identifying the current trends and future perspectives , 2018, Process Safety and Environmental Protection.

[70]  Afaq Ahmed,et al.  Reconfigurable manufacturing systems; an approach to increase the productivity of manufacturing systems , 2019, 2019 International Conference on Robotics and Automation in Industry (ICRAI).

[71]  Remco M. Dijkman,et al.  Developing process execution support for high tech manufacturing processes , 2019 .

[72]  Mark von Rosing,et al.  Business Process Model and Notation - BPMN , 2015, The Complete Business Process Handbook, Vol. I.

[73]  Fernando Romero,et al.  A review of the meanings and the implications of the Industry 4.0 concept , 2017 .

[74]  Sang Do Noh,et al.  Smart manufacturing: Past research, present findings, and future directions , 2016, International Journal of Precision Engineering and Manufacturing-Green Technology.

[75]  David Chen,et al.  Enterprise-control system integration : an international standard , 2005 .

[76]  Zack J. Butler,et al.  Self-reconfiguring robots , 2002, CACM.

[77]  L. N. López de Lacalle,et al.  TRLs 5–7 Advanced Manufacturing Centres, Practical Model to Boost Technology Transfer in Manufacturing , 2019, Sustainability.

[78]  MolinaArturo,et al.  Enterprise integration and interoperability in manufacturing systems , 2008 .

[79]  Alan R. Hevner,et al.  Design Science in Information Systems Research , 2004, MIS Q..

[80]  Antonio García-Domínguez,et al.  A comparison of BPMN 2.0 with other notations for manufacturing processes , 2012 .

[81]  George Vassilacopoulos,et al.  An ontology-based competency model for workflow activity assignment policies , 2008, J. Knowl. Manag..

[82]  María Concepción López Fernández,et al.  A review of manufacturing flexibility: systematising the concept , 2016 .

[83]  John Mylopoulos,et al.  Workflow Management Models , Methods , and Systems , 2002 .