论文信息 - A novel approach to the analysis and design of the class-E DC-to-DC converter

A novel approach to the analysis and design of the class-E DC-to-DC converter

An exact analysis of the class-E DC-to-DC converter is presented by using the state-plane diagram. The state-plane representation provides better physical insight into the converter operation than the conventional time-domain approach. From a set of equations derived from the analysis, the conditions for zero voltage switching and the control characteristics of the converter are obtained. These results are expressed in the form of design curves.<<ETX>>

C. Q. Lee | R. Liu | R. Liu

[1] Marian K. Kazimierczuk,et al. Class E DC/DC converters with an inductive impedance inverter , 1989 .

[2] Bela Molnar,et al. Class-E resonant regulated DC/DC power converters: analysis of operation, and experimental results at 1.5 MHZ , 1983, 1983 IEEE Power Electronics Specialists Conference.

[3] Ronald J. Gutmann,et al. Application of RF Circuit Design Principles to Distributed Power Converters , 1980, IEEE Transactions on Industrial Electronics and Control Instrumentation.

[4] Bela Molnar,et al. Class E Resonant Regulated DC/DC Power Converters: Analysis of Operations, and Experimental Results at 1.5 MHz , 1986, IEEE Transactions on Power Electronics.