Behavioural study of completely overlapped tubular joints under monotonic and cyclic axial loading
暂无分享,去创建一个
[1] J. A. Yura,et al. The Effect Of Chord Stresses On The Static Strength Of DT Tubular Connections , 1986 .
[2] Wie Min. Gho. Structural behaviour of completely overlap tubular joints. , 2001 .
[3] Jaap Wardenier. Design guide for circular hollow section (CHS) joints under predominantly static loading , 1991 .
[4] M.M.K Lee,et al. Strength, stress and fracture analyses of offshore tubular joints using finite elements , 1999 .
[5] E. M. Dexter,et al. Static Strength of Axially Loaded Tubular K-Joints. I: Behavior , 1999 .
[6] Raphael H. Grzebieta,et al. Tests of Cold-Formed Circular Tubular Braces under Cyclic Axial Loading , 2003 .
[7] P. W. Marshall. REVIEW OF TUBULAR JOINT CRITERIA , 2004 .
[8] Yoshiaki Kurobane,et al. New developments and practices in tubular joint design , 1981 .
[9] T. C. Fung,et al. Behavior of Completely Overlapped Tubular Joints under Cyclic Loading , 2001 .
[10] Jacobus Cornelis Paul. The Ultimate Behavior of Multiplanar TT and KK-Joints Made of Circular Hollow Sections , 1992 .
[11] Jaap Wardenier,et al. Numerical Simulation Of Experiments On Multiplanar Tubular Steel X-Joints , 1991 .
[12] J. B. Jr. Reber. ULTIMATE STRENGTH DESIGN OF TUBULAR JOINTS , 1972 .
[13] J. A. Yura,et al. Ultimate Strength of Tubular Joints Subjected to Combined Loads , 1985 .
[14] Subhash C. Goel,et al. Cyclic Load Behavior of Concrete‐Filled Tubular Braces , 1988 .
[15] Kenneth M. Will,et al. A FINITE ELEMENT TECHNIQUE FOR THE ULTIMATE STRENGTH ANALYSIS OF TUBULAR JOINTS , 1992 .
[16] Egor P. Popov,et al. Inelastic Cyclic Behavior of Tubular Braced Frames , 1980 .
[17] Yoshiaki Kurobane,et al. Local buckling of braces in tubular K-joints , 1986 .
[18] M. Crisfield. A FAST INCREMENTAL/ITERATIVE SOLUTION PROCEDURE THAT HANDLES "SNAP-THROUGH" , 1981 .
[19] G. J. Van der Vegte,et al. The Static Strength of Uniplanar and Multiplanar Tubular T- And X-Joints , 1995 .
[20] M. Lalani. Developments In Tubular Joints Technology For Offshore Structures , 1992 .
[21] Antony Philiastides. Fully overlapped rolled hollow section welded joints in trusses , 1988 .
[22] Chee Kiong Soh,et al. Ultimate capacity of completely overlapped tubular joints. II: Behavioural study , 2001 .
[23] M. G. Kirkwood,et al. Overlapped K joints in circular hollow sections under axial loading (An investigation of the factors affecting the static strength using numerical modeling) , 1996 .
[24] Chee Kiong Soh,et al. Ultimate capacity of completely overlapped tubular joints , 2001 .
[25] P. Marshall. CONNECTIONS FOR WELDED TUBULAR STRUCTURES , 1984 .
[26] Andrew W Taylor. Report of a workshop on requalification of tubular steel joints in offshore structures , 1996 .
[27] Ekkehard Ramm,et al. Strategies for Tracing the Nonlinear Response Near Limit Points , 1981 .
[28] E. M. Dexter,et al. Static Strength of Axially Loaded Tubular K-Joints. II: Ultimate Capacity , 1999 .
[29] Yoshiaki Kurobane,et al. Ultimate Resistance of Unstiffened Tubular Joints , 1984 .
[30] Bjørn Skallerudn. ON THE RELATIONSHIP BETWEEN LOW CYCLE FATIGUE AND CRACK GROWTH RATE PROPERTIES IN WELDED STEEL COMPONENTS , 1992 .
[31] J. G. Kuang,et al. Ultimate Strength of Tubular Joints , 1977 .
[32] Joseph A. Yura,et al. Ultimate Capacity Equations for Tubular Joints , 1980 .
[33] M Lalani,et al. RECENT DEVELOPMENTS IN THE ULTIMATE STRENGTH ASSESSMENT OF TUBULAR JOINTS: A NONLINEAR NUMERICAL TREATMENT , 1989 .
[34] Raphael H. Grzebieta,et al. Void-Filled Cold-Formed Rectangular Hollow Section Braces Subjected to Large Deformation Cyclic Axial Loading , 2002 .