Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator

[1]  Adrian Bejan,et al.  Thermodynamic optimization of finned crossflow heat exchangers for aircraft environmental control systems , 2001 .

[2]  Z. Lavan,et al.  Entropy generation in combined heat and mass transfer , 1987 .

[3]  Z. Lavan,et al.  Entropy generation in convective heat transfer and isothermal convective mass transfer , 1987 .

[4]  A. Durmuş,et al.  HEAT TRANSFER AND ENERGY LOSS IN A CONCENTRIC HEAT EXCHANGER WITH SNAIL ENTRANCE , 2002 .

[5]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[6]  Kankanhalli N. Seetharamu,et al.  The effects of inlet fluid flow nonuniformity on thermal performance and pressure drops in crossflow plate-fin compact heat exchangers , 1996 .

[7]  V. Zimparov,et al.  Extended performance evaluation criteria for enhanced heat transfer surfaces: heat transfer through ducts with constant heat flux , 2001 .

[8]  A. Fakheri.  Thermal Efficiency of the Cross Flow Heat Exchangers , 2006 .

[9]  Klaus Lucas,et al.  On the thermodynamics of cogeneration , 2000 .

[10]  S. Çalışkan,et al.  Experimental Investigation of a Cross-Flow Heat Exchanger with Wing-Type Vortex Generators , 2008 .

[11]  Arthur E. Bergles,et al.  Heat Transfer Enhancement—The Encouragement and Accommodation of High Heat Fluxes , 1997 .

[12]  R. Viskanta,et al.  Journal of Heat Transfer Policy on Reporting Uncertainties in Experimental Measurements and Results , 1993 .

[13]  Ibrahim Dincer,et al.  Effect of varying dead-state properties on energy and exergy analyses of thermal systems , 2004 .

[14]  Jung-Yang San,et al.  Second-law analysis of a wet crossflow heat exchanger , 2000 .

[15]  Lan Xiao,et al.  Exergy transfer effectiveness on heat exchanger for finite pressure drop , 2007 .

[16]  Jalal Shayegan,et al.  Thermodynamic optimization of design variables and heat exchangers layout in HRSGs for CCGT, using genetic algorithm , 2009 .

[17]  Effects of Manufacturing Tolerances on Regenerative Exchanger Number of Transfer Units and Entropy Generation , 2006 .

[18]  A. Bejan,et al.  Entropy Generation Through Heat and Fluid Flow , 1983 .

[19]  H. A. Navarro,et al.  Thermal Performance of Multipass Parallel and Counter-Cross-Flow Heat Exchangers , 2007 .

[20]  M. S Söylemez.  On the optimum heat exchanger sizing for heat recovery , 2000 .

[21]  R. Ogulata,et al.  Irreversibility analysis of cross flow heat exchangers , 2000 .

[22]  A. Bejan,et al.  Fin Geometry for Minimum Entropy Generation in Forced Convection , 1982 .

[23]  A. K. Satapathy,et al.  Thermodynamic optimization of a coiled tube heat exchanger under constant wall heat flux condition , 2009 .

[24]  V. Zimparov,et al.  Extended performance evaluation criteria for enhanced heat transfer surfaces: heat transfer through ducts with constant wall temperature , 2000 .

[25]  İsak Kotcioğlu.  Heat Transfer and Flow Structure in a Rectangular Channel With Wing-Type Vortex Generator , 1998 .

[26]  A. Bejan.  The Concept of Irreversibility in Heat Exchanger Design: Counterflow Heat Exchangers for Gas-to-Gas Applications , 1977 .