The natural synovial joint: A finite element investigation of biphasic surface amorphous layer lubrication under dynamic loading conditions

Abstract Despite much research, the lubrication mechanisms operating in healthy synovial joints, particularly in the boundary or mixed regimes, are still not clear. This work continued the previous research by the authors in using a finite element model to investigate the effect of a soft, biphasic, amorphous surface layer on the lubrication characteristics of articular cartilage. This model was extended and the ‘biphasic surface amorphous layer (SAL) effect’ was investigated under repetitive, dynamic loading conditions. The results of this model showed that the lubrication benefits and stress shielding conferred by the soft, biphasic SAL remained almost entirely effective, despite incomplete cartilage swelling during unloading. The reduction in friction and improved lubrication were shown to be more beneficial during rapid dynamic loading and adversely effected by slow, static loading. The very rapid recovery of the SAL was shown to play an essential role in the mechanism and was important in helping the tissue to sustain low friction under conditions of repeated dynamic loading.

[1]  E. Radin,et al.  The molecular basis of articular lubrication. I. Purification and properties of a lubricating fraction from bovine synovial fluid. , 1972, The Journal of biological chemistry.

[2]  Gerard A Ateshian,et al.  Effect of dynamic loading on the frictional response of bovine articular cartilage. , 2005, Journal of biomechanics.

[3]  P. Torzilli,et al.  Water content and equilibrium water partition in immature cartilage , 1988, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[4]  Zhongmin Jin,et al.  Biphasic surface amorphous layer lubrication of articular cartilage. , 2005, Medical engineering & physics.

[5]  J Fisher,et al.  Investigation into the effect of proteoglycan molecules on the tribological properties of cartilage joint tissues , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[6]  H J Mankin,et al.  Water content and binding in normal and osteoarthritic human cartilage. , 1975, The Journal of bone and joint surgery. American volume.

[7]  W M Lai,et al.  An analysis of the unconfined compression of articular cartilage. , 1984, Journal of biomechanical engineering.

[8]  D. Dowson,et al.  Micro-elastohydrodynamic lubrication of synovial joints. , 1986, Engineering in medicine.

[9]  D. Dowson.  Paper 12: Modes of Lubrication in Human Joints , 1966 .

[10]  V. Mow,et al.  Biphasic creep and stress relaxation of articular cartilage in compression? Theory and experiments. , 1980, Journal of biomechanical engineering.

[11]  A van der Voet,et al.  A comparison of finite element codes for the solution of biphasic poroelastic problems. , 1997, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[12]  K. Ikeuchi,et al.  Influence of proteoglycan contents and of tissue hydration on the frictional characteristics of articular cartilage , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[13]  Van C. Mow,et al.  Recent Developments in Synovial Joint Biomechanics , 1980 .

[14]  D Dowson,et al.  Lubrication and cartilage. , 1976, Journal of anatomy.

[15]  V C Mow,et al.  Variations in the intrinsic mechanical properties of human articular cartilage with age, degeneration, and water content. , 1982, The Journal of bone and joint surgery. American volume.

[16]  J Fisher,et al.  Frictional behaviour of bovine articular cartilage. , 2000, Biorheology.

[17]  J Fisher,et al.  The Influence of Loading Time and Lubricant on the Friction of Articular Cartilage , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[18]  G A Ateshian,et al.  A theoretical formulation for boundary friction in articular cartilage. , 1997, Journal of biomechanical engineering.

[19]  Monika Kopacz,et al.  Experimental verification of the role of interstitial fluid pressurization in cartilage lubrication , 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[20]  J Fisher,et al.  The influence of continuous sliding and subsequent surface wear on the friction of articular cartilage , 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[21]  Van C. Mow,et al.  Structure and function of articular cartilage and meniscus , 2005 .

[22]  C. McCutchen,et al.  Mechanism of Animal Joints: Sponge-hydrostatic and Weeping Bearings , 1959, Nature.

[23]  W M Lai,et al.  A triphasic theory for the swelling and deformation behaviors of articular cartilage. , 1991, Journal of biomechanical engineering.

[24]  Tribological effects of roughness and running-in on oil-lubricated line contacts , 1997 .

[25]  Uri Raviv,et al.  Lubrication by charged polymers , 2003, Nature.

[26]  H. Higaki,et al.  Adaptive multimode lubrication in natural synovial joints and artificial joints , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[27]  C. McCutchen.  The frictional properties of animal joints , 1962 .

[28]  C. McCutchen.  Sponge-hydrostatic and weeping bearings. , 1959, Nature.

[29]  D Dowson,et al.  "Boosted lubrication" in synovial joints by fluid entrapment and enrichment. , 1968, Annals of the rheumatic diseases.

[30]  U. Raviv,et al.  Fluidity of Bound Hydration Layers , 2002, Science.

[31]  V C Mow,et al.  Effects of friction on the unconfined compressive response of articular cartilage: a finite element analysis. , 1990, Journal of biomechanical engineering.

[32]  Gerard A. Ateshian,et al.  The Role of Osmotic Pressure and Tension-Compression Nonlinearity in the Frictional Response of Articular Cartilage , 2003 .

[33]  S. Kobayashi,et al.  Cryoscanning electron microscopic study of the surface amorphous layer of articular cartilage. , 1995, Journal of anatomy.

[34]  B A Hills,et al.  Oligolamellar lubrication of joints by surface active phospholipid. , 1989, The Journal of rheumatology.

[35]  Gerard A. Ateshian,et al.  The Role of Interstitial Fluid Pressurization and Surface Porosities on the Boundary Friction of Articular Cartilage , 1998 .

[36]  E. Radin,et al.  Separation of a Hyaluronate-free Lubricating Fraction from Synovial Fluid , 1970, Nature.

[37]  D. Dowson,et al.  Mode of aggregation of hyaluronic acid protein complex on the surface of articular cartilage. , 1970, Annals of the rheumatic diseases.

[38]  J CHARNLEY,et al.  The Lubrication of Animal Joints in Relation to Surgical Reconstruction by Arthroplasty * , 1960, Annals of the rheumatic diseases.