A simple all-fiber comb filter based on the combined effect of multimode interference and Mach-Zehnder interferometer

A polarization-dependent all-fiber comb filter based on a combination effect of multimode interference and Mach-Zehnder interferometer was proposed and demonstrated. The comb filter was composed with a short section of multimode fiber (MMF) fusion spliced with a conventional single mode fiber on the one side and a short section of a different type of optical fiber on the other side. The second type of optical fiber is spliced to the MMF with a properly designed misalignment. Different types and lengths of fibers were used to investigate the influence of fiber types and lengths on the performance of the comb filter. Experimentally, several comb filters with free spectral range (FSR) values ranging from 0.236 to 1.524 nm were achieved. The extinction ratio of the comb filter can be adjusted from 6 to 11.1 dB by varying polarization states of the input light, while maintaining the FSR unchanged. The proposed comb filter has the potential to be used in optical dense wavelength division multiplexing communication systems.

[1]  L. Glebov,et al.  Single resonance monolithic Fabry-Perot filters formed by volume Bragg gratings and multilayer dielectric mirrors. , 2011, Optics letters.

[2]  H. Fu,et al.  Tunable and Selectable Multipassband Microwave Photonic Filter Utilizing Reflective and Cascaded Fiber Mach–Zehnder Interferometers , 2017, Journal of Lightwave Technology.

[3]  Qiang Wu,et al.  High sensitivity refractive index sensor based on a tapered small core single-mode fiber structure. , 2015, Optics letters.

[4]  Yikai Su,et al.  Wavelength and bandwidth-tunable silicon comb filter based on Sagnac loop mirrors with Mach-Zehnder interferometer couplers. , 2016, Optics express.

[5]  Z. Zhang,et al.  Tunable and switchable dual-wavelength dissipative soliton generation in an all-normal-dispersion Yb-doped fiber laser with birefringence fiber filter. , 2012, Optics express.

[6]  Ning Wang,et al.  Magnetic field sensing based on singlemode-multimode-singlemode fiber structures using magnetic fluids as cladding. , 2013, Optics letters.

[7]  Guoyong Sun,et al.  Tunable multiwavelength fiber laser using a comb filter based on erbium-ytterbium co-doped polarization maintaining fiber loop mirror. , 2008, Optics express.

[8]  Hwa-Yaw Tam,et al.  Magnetic field sensor of enhanced sensitivity and temperature self-calibration based on silica fiber Fabry-Perot resonator with silicone cavity. , 2017, Optics express.

[9]  M Johnson.  Poincareé sphere representation of birefringent networks. , 1981, Applied optics.

[10]  A. Luo,et al.  Multiwavelength Switchable Erbium-Doped Fiber Ring Laser With a PBS-Based Mach–Zehnder Comb Filter , 2011, IEEE Photonics Journal.

[11]  Chia-Chin Chiang,et al.  Perfectly notched long-period fiber grating filter based on ICP dry etching technique. , 2012, Optics letters.

[12]  W. Pan,et al.  Novel birefringence interrogation for Sagnac loop interferometer sensor with unlimited linear measurement range. , 2017, Optics express.

[13]  Evanescent field coupling between two parallel close contact SMS fiber structures. , 2012, Optics express.

[14]  Chongxiu Yu,et al.  Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure. , 2011, Optics letters.

[15]  UV exposure on a single-mode fiber within a multimode interference structure. , 2014, Optics letters.

[16]  Han Chunyang,et al.  Temperature insensitive refractive index sensor based on single-mode micro-fiber Sagnac loop interferometer , 2014 .

[17]  Chengkuo Lee,et al.  Fabry-Perot filter using grating structures. , 2013, Optics letters.

[18]  Aoxiang Lin,et al.  Large temperature sensitivity of Sagnac loop interferometer based on the birefringent holey fiber filled with metal indium. , 2009, Optics express.

[19]  H. Arof,et al.  Steel Beam Compressive Strain Sensor Using Single-Mode-Multimode-Single-Mode Fiber Structure , 2016, IEEE Photonics Journal.

[20]  A B Tveten,et al.  Dependence of visibility on input polarization in interferometric fiber-optic sensors. , 1988, Optics letters.

[21]  A. Kersey,et al.  Optimization and stabilization of visibility in interferometric fiber-optic sensors using input-polarization control , 1988 .

[22]  Q. Han,et al.  Self-temperature-compensative refractometer based on singlemode–multimode–singlemode fiber structure , 2015 .

[23]  José Azaña,et al.  Nonlinear pulse compression of picosecond parabolic-like pulses synthesized with a long period fiber grating filter. , 2009, Optics express.

[24]  Yasuji Murakami,et al.  Basic design for highly stable mechanical optical fiber splice and its development , 1999 .

[25]  Wei Xia,et al.  High-resolution fiber Bragg grating based transverse load sensor using microwave photonics filtering technique. , 2016, Optics express.

[26]  A. Martinez-Rios,et al.  Tailoring Mach–Zehnder Comb-Filters Based on Concatenated Tapers , 2013, Journal of Lightwave Technology.

[27]  Zhi-Chao Luo,et al.  Polarization-Independent, Multifunctional All-Fiber Comb Filter Using Variable Ratio Coupler-Based Mach–Zehnder Interferometer , 2012, Journal of Lightwave Technology.

[28]  C. Lo,et al.  Post-lithography pattern modification and its application to a tunable wire grid polarizer , 2013, Nanotechnology.